
Abstract The composite cycle engine (CCE) offers a promising pathway for significantly reducing fuel burn in future aircraft. By integrating a piston system into the core of a gas turbine, the CCE can utilise higher peak cycle temperatures and pressures and thus, achieve a step-change in thermal efficiency. These conditions also promote increased levels of normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ formation. This paper presents a methodology for the preliminary estimation of normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ emissions within both the piston engine and the subsequent Joule combustor. Fast-responding parametric models capable of capturing key normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ sensitivities, particularly the impact of combustion vitiation through water injection and exhaust gas recirculation (EGR), are established. Piston normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ is modelled using a two-zone approach, which demonstrates good correlation with reference engine data from literature. For the Joule combustor, a stochastic flow description is employed to predict normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ formation, with validation against an in-service combustor confirming the model’s predictive capability. Initial studies indicate high baseline piston normal upper N normal upper O Subscript x N O x $\mathrm{NO}_x$ emissions, though significant mitigation is achievable through water injection or EGR. This work establishes a framework for future research into the emissions and necessary mitigation strategies for the CCE and other advanced combustion technologies.
Abstract Recent advances in aerial robotics have led to the development of variable geometry platforms, such as the serially reconfigurable quadrotor (SRQ), which enhance flexibility, adaptability and mission versatility. However, controlling such morphologically adaptive systems remains a significant challenge due to time-varying parameters, strong nonlinearities, structural asymmetries and modelling uncertainties introduced by reconfiguration. To overcome these challenges, this paper presents a comprehensive nonlinear dynamic model that accurately describes the SRQ behaviour while accounting for variations in the moments of inertia, their time derivatives and aerodynamic effects. Based on this model, a geometric simplification is proposed to enable the synthesis of a robust control framework that integrates an improved power rate reaching law (IPRRL) within a fast terminal sliding mode controller (FTSMC) combined with a finite time disturbance observer (FTDO). The proposed control scheme guarantees fast finite-time convergence, effective chattering suppression and robustness to external disturbances. Moreover, the controller and observer parameters are optimally tuned using the whale optimisation algorithm (WOA). Simulation results demonstrate that the proposed IPRRL–FTSMC framework achieves superior tracking precision, enhanced robustness and substantial chattering reduction compared with conventional sliding mode control (SMC) and FTSMC controllers. These results confirm the effectiveness and reliability of the proposed control approach for reconfigurable aerial robotic systems.
Abstract The present study numerically investigates the unsteady shock dynamics inside a resonance tube operating in the jet regurgitant mode. Unsteady simulations using a density-based solver were conducted to analyse the coupled interaction between the underexpanded nozzle jet and the cavity flow. The numerical model is validated with available experimental measurements by comparing the resonance frequency, cavity tip temperature and shock structure between the nozzle exit and cavity inlet. The predicted dominant frequency (∼1054 Hz) and wall temperature (∼408 K) show good agreement with experimental data, confirming the simulation’s ability to reproduce an experimentally observed resonance process. Numerical results show that the resonance process is dominated by periodic influx and efflux of the jet, accompanied by the formation, propagation and reflection of incident and reflected shock waves inside the cavity. Despite the longer duration and higher velocity influx phase, continuous near-wall outflow maintains nearly zero net mass exchange over each resonance cycle. The time spent in the influx phase is greater than that in the efflux phase. The results also show that the temperature rise inside the cavity is primarily due to shock irreversibility rather than compression of trapped gas alone. Multiple reflected shocks have been observed, and their merger is found to increase the wave speed and strengthen the pressure oscillations. A higher average speed of the incident shock wave compared to the reflected shock wave has been observed. The present study provides a detailed description of shock motion and heat generation mechanisms in cylindrical resonance tubes.
Abstract Wildfires are a natural part of the wildland life cycle. Decades-long trends of increased frequency, duration and magnitude of wildfires have increased the risk of fatalities, property damage and financial loss. To address this risk, fire containment and suppression methods have been adapted to include increased use of aerial firefighting. In support of ground crews, strategic retardant drops using very large, large and scooper air tankers can assist in the containment and/or suppression of large wildfires. The purpose of this report is to provide statistics on the U.S. aerial firefighting fleet, flight operations and airport utilisation in 2025. This information may be of use to air tanker operators, airport planners, air navigation service providers, aircraft manufacturers and policy makers. In 2025, 43 tankers under contract with the United States Forest Service (USFS) ranged in age from 10 to 57 years. The aircraft performed 10,912 retardant drop and reposition flights. Flights operated on 92% of the days of the year. with an average of 30 flights per day; the maximum number of flights per day was 206. The median duration of a retardant drop flight was 36 minutes. Thirteen airports supported 50% of the flights. A total of 195 airports were used at least once.
Abstract Fuel requirement is one of the most important issues in aircraft performance. For an aircraft of a given mass, flying in an atmosphere where temperature is a monotonically decreasing function of pressure, there is one Mach number and flight level (FL) pair for which the specific air range (SAR), i.e. the distance travelled through the air per unit mass of fuel consumed, is a maximum. Specific air range is directly proportional to the range parameter, which is the product of the overall engine efficiency and the airframe lift-to-drag ratio. During the aircraft design process, the optimum value of the range parameter is fixed at a specific ‘design’ mass in a specific ‘design’ atmosphere. This ‘design optimum’ condition is a characteristic of the aircraft and engine combination, occurring at a particular Mach number and flight level pair. However, in routine operations, the aircraft mass and the atmospheric characteristics will rarely, if ever, coincide with the design conditions. Consequently, in general, the operational optimum Mach number and flight level pair will not be the same as that at the design optimum. The primary purpose of this analysis is to find the general relationship between the operational and the design conditions. In performance calculations, it is often assumed that, if the Mach number and lift coefficient are constant, the range parameter is also constant. This leads to the well-known ‘cruise climb’ trajectory for ‘maximum’ range and, for the whole flight, the classical Breguet range equation for the required trip fuel. However, to maintain a constant lift coefficient, the aircraft must climb as mass reduces and, depending upon the relationship between temperature and pressure in the atmosphere, its Reynolds number changes. It is shown that these Reynolds number changes can alter the range parameter by several percent as the flight progresses, and the standard Breguet equation may produce significant errors in the trip fuel estimation. Therefore, a completely general formulation of the range equation is presented. The well-documented, open-source, Poll-Schumann aircraft performance model is used to provide data for a wide range of operating conditions. Tabulated coefficients are provided to allow operational estimates to be made for 71 aircraft types and variants. These values are best estimates based upon information available in the public domain.