
The relationship between microstructure, martensitic transformations, strength, plastic, and functional characteristics of hot-deformed titanium nickelide has been investigated in the testing temperature range from -196 °C to 60 °C. Aging conditions ensuring the maximum efficiency of improving the studied characteristics have been determined.
Polydimethylphenylsilazane (PSZ) and phenol-formaldehyde resins (PFR) were synthesized with the elemental composition, wt.%: 44.4 C, 7.9 H, 19.3 N, 25.6 Si, 2.8 O and 76.9 C, 6.0 H, 17.1 O, respectively. The pyrolysis of cured resins (upon heating to 1100 °C, Ar) and the effect of high-temperature treatment (HTT) (upon heating to 1750 °C, Ar) on changes in the phase composition, density, and specific surface area of the obtained inorganic residues were investigated. It was established that the mass losses of the residues before and after HTT as a result of oxidation in air at 650 °C for 6 h were 5.2 and 12.7 wt.% (PSZ), and 99.3 and 96.1 wt.% (PFR). The reasons for the differences in oxidation resistance are considered. The prospects of using PSZ as an agent for “soft” siliconization in ceramic-matrix composite technology are noted.
The review analyzes the effect of silver alloying on the properties of titanium alloys for medical applications. It has been established that the antibacterial effect is mainly due to contact interaction with particles of silver intermetallic compounds. The optimal Ag content (3-10 wt.%) provides a balance between bactericidal activity, biocompatibility, and mechanical characteristics. Of greatest interest are Ti-Nb-Ag β-alloys with a low elastic modulus, which are the subject of current research.
The results of studies of the microstructure of structural steel 30KhN3A after laser hardening using a multichannel CO2 laser are presented. Diagnostics of the homogeneity properties and depth of the hardened layer according to the “microhardness” criterion has been carried out. The ffectiveness of laser hardening using this type of laser has been shown.
In this work the connection between the parameters of the gratings constructed by the dispersed filler phase and the dispersed structure with the electrophysical characteristics of particulate-filled polymer composite materials (PFPCMs) has been first established. It is shown that it is possible to compare the results of PFPCMs with various electrically conductive fillers in terms of electrophysical characteristics only with one type of lattice or dispersed structure and a constant value of the coordination number Zi and the generalized parameter Θ. An algorithm for creating PFPCMs with different parameters and types of structures with a given level of electrophysical characteristics is proposed.