
This study evaluates the influence of lithology and crushing processes on the morphology of fine aggregates from five quarries of plutonic igneous and metamorphic origin. Three particle size fractions (0.30, 0.60, and 1.18 mm) were analyzed using the Aggregate Imaging Measurement System (AIMS) and the Fine Aggregate Angularity (FAA) test according to Brazilian standards DNIT 432/2020 and DNIT 415/2019, respectively. The originality of this study lies in the integrated evaluation of geological anisotropy, crushing technology, and aggregate morphology using both indirect (FAA) and image-based (AIMS) methods under real quarry operating conditions. The results demonstrated that geological features such as magmatic foliation, mineral orientation, gneissic banding, and cleavage planes influence aggregate shape and angularity by controlling preferential fracture mechanisms during crushing. However, the cone crusher (CC) and, especially, the vertical shaft impact crusher (VSI) were capable of partially mitigating these geological effects, producing predominantly semicircular and subrounded to subangular particles. Aggregates processed by VSI exhibited more uniform 2D shape distributions and lower shape variability than those produced by CC, particularly for metamorphic rocks. Statistical analysis (ANOVA) revealed significant differences (p < 0.05) between FAA and AIMS results, indicating that the indirect nature of FAA may lead to angularity interpretations that differ from those obtained through image-based measurements. The findings highlight the importance of considering both lithology and crushing technology in aggregate production, as well as the need for more reliable and standardized protocols for morphological characterization in civil engineering applications.
Piled raft foundation systems (PRFS) have been increasingly adopted as an alternative foundation system in developed urban areas underlain by soft soils. In such soils, a double consolidation process may occur as a result of both external loading and subsidence, leading to changes in the soil stress state. Previous studies on PRFS have primarily focused on settlement behaviour induced by external loading, whereas the effects of subsidence processes have received comparatively limited attention. Moreover, most investigations of PRFS behaviour have been conducted using numerical approaches. This study presents an experimental investigation of the behaviour of PRFS using geotechnical centrifuge modelling, with particular emphasis on the redistribution of load between the raft and piles and the associated changes in pore water pressure. Physical models at a scale 1:70 were developed and instrumented to enable direct measurements of the foundation response. The results demonstrate that the proportion of load carried by the raft and piles varies with the pile arrangement and changes in pore water pressure within the soil. The pile contribution increased from 23–26% during Stage 2 to 46–54% during Stage 3, indicating a substantial redistribution of load from the raft to the piles following groundwater extraction. Under subsidence conditions, the redistribution of load between the raft and piles was found to be consistent with trends previously reported in the literature.
The mechanical behaviour of filtered iron ore tailings is governed by stress paths and fabric anisotropy induced during placement and compaction in “dry”-stacked facilities. Although cementation is widely used to enhance strength and stiffness, most studies remain limited to axisymmetric conditions, providing limited insight into multiaxial stress states and the role of intermediate principal stress. This study evaluates the multiaxial behaviour of cemented iron ore tailings under different stress paths, focusing on stress-path dependency and anisotropy. Initial characterization comprised unconfined compression tests on mixtures prepared with varying dry unit weights and cement contents. Selected mixtures were then tested in a true triaxial apparatus under constant mean effective stress, considering compression, plane stress, and extension loading paths. Results show that cementation increases stiffness and strength while reducing sensitivity to loading direction and stress path. Compaction-induced anisotropy observed in untreated tailings is mitigated after cement addition, particularly under compression and plane stress conditions. Cemented specimens also exhibit lower volumetric strains, indicating improved resistance to contractive behaviour. Overall, cementation promotes a more isotropic multiaxial response in iron ore tailings under stress conditions representative of “dry”-stacked facilities, highlighting the importance of incorporating stress-path effects in stability assessments.
This paper presents a field-based assessment of near-surface hydraulic conductivity in a compacted filtered iron ore tailings stack using mini-infiltrometer tests. A total of 115 in situ measurements were performed on the compacted surface, providing a dataset for evaluating the variability of near-surface field measurements under controlled suction conditions. The mini-infiltrometer results are interpreted as hydraulic conductivity values associated with the pressure head applied at the porous disk–tailings interface, not necessarily as fully saturated hydraulic conductivity. The measured values ranged from 1.14 × 10−7 m/s to 4.59 × 10−6 m/s, with an arithmetic mean of 1.31 × 10−6 m/s, a median of 1.20 × 10−6 m/s, and a geometric mean of 1.12 × 10−6 m/s. Although the results were concentrated around 10−6 m/s, the coefficient of variation was approximately 56.9%, indicating relevant relative variability. Most values were located between 5.0 × 10−7 m/s and 3.0 × 10−6 m/s, supporting the use of the geometric mean as a representative central estimate for engineering analyses. The influence of imposed suction (h0 ) was also examined; however, no systematic dependence on the applied values was identified. Comparison with published data shows that the results fall within the range reported for compacted and filtered tailings, while reinforcing that hydraulic conductivity cannot be inferred from void ratio alone. The study highlights the importance of direct field measurements for supporting seepage analyses, transient flow modelling, water balance assessments, and hydraulic characterization of filtered tailings stacks.
Fault-induced permanent ground deformation poses a serious threat to foundations located near active reverse faults. This study numerically investigates the coupled response of a shallow foundation and a single pile subjected to reverse fault rupture using a two dimensional finite element model. The numerical framework is developed based on centrifuge test configurations and validated against experimental observations in terms of rupture trajectory, foundation deformation, and pile response. The results demonstrate a strong coupled interaction between the shallow foundation and the pile. The presence of the pile significantly increases the rotation and lateral displacement of the shallow foundation, while the shallow foundation alters the surrounding soil stress field and leads to higher bending moments along the pile. Parametric analyses conducted for different normalized fault offsets (h/H) demonstrate that increasing fault displacement intensifies stress concentration and expands the plastic zone in the vicinity of the pile–foundation system. The findings emphasize that shallow and deep foundation elements should not be designed independently in fault-affected regions, and that coupled soil–foundation interaction should be considered to improve seismic resilience under reverse fault rupture.