
Abstract Fracture–vug carbonate reservoirs contain strongly heterogeneous flow spaces, where fractures provide the main conducting pathways and vugs act as local geometric enlargements. Understanding how such a local vug modifies fracture flow is important for interpreting nonlinear pressure response and apparent flow capacity in fracture–vug media. Here, we perform numerical simulations on regular fracture–vug elements over a range of fracture–vug ratios () and Reynolds numbers to examine how vug‐induced flow redistribution, recirculation, and local pressure loss develop. We show that the hydraulic response of a fracture–vug element is not a simple Forchheimer‐type deviation. The global pressure response remains nearly linear, while the local pressure drop across the vug becomes strongly nonlinear with increasing Re and . Velocity profiles further indicate that vug‐induced disturbance is spatially localized: it is concentrated inside and immediately around the vug and rapidly recovers downstream. Therefore, the key hydraulic effect of the vug is not persistent far‐field velocity distortion, but localized flow reorganization and energy dissipation. A three‐stage mechanism is identified from the combined evolution of recirculation area ratio and local pressure‐flow exponent. The vug first enhances apparent flow capacity by enlarging the local flow space, then weakens this enhancement through inertial redistribution and outlet recontraction, and finally suppresses effective flow through closed recirculation and vortex‐associated dissipation. This mechanism clarifies how a single vug switches from a flow‐enhancing structure to a local‐dissipative structure, providing a hydrodynamic basis for interpreting nonlinear flow and future multiphase displacement in fracture–vug carbonate reservoirs.
Abstract The transfer of material from subducted slabs into the mantle wedge exerts a fundamental control on the geochemical signatures of arc magmas, yet whether this transfer is dominated by hydrous fluids or melts from discrete slab components, or from hybridized mélange zones along the slab‐mantle interface, remains debated. We address this problem using the chemical and isotopic compositions of Izu‐Bonin arc magmas erupted over the past ∼52 Myr, combined with new models of slab thermal evolution, to evaluate how slab‐to‐mantle transfer processes evolve through time. Our results show that trace‐element and isotopic systematics record a systematic shift in transfer mechanisms linked to changes in slab‐top temperature. Magmas erupted within about a few million years after subduction initiation reflect contributions from hydrous melts or fluids derived from discrete sediment and altered oceanic crust sources. In contrast, magmas from later stages of Izu‐Bonin arc evolution are best explained by inputs from melts and fluids generated within mélange zones along the slab‐mantle interface. Geodynamic models that incorporate a progressively deepening coupling‐decoupling transition reproduce thermal structures that account for changes in equilibrium mineral assemblages at the slab‐mantle interface, explaining the trace‐element fractionations recorded in these magmas. We propose that cooling of the slab‐top and deepening of the decoupled slab‐mantle interface promote physical mixing and mélange formation, driving the observed transition in transfer mechanisms. Comparisons among other Quaternary arcs spanning a range of slab thermal regimes support this interpretation, showing that mélange‐derived inputs become increasingly dominant in the magma source as slab‐tops cool.
Abstract Rupture speed, one of the vital earthquake source parameters, has been constrained with many different methods but sometimes is controversial among studies for some earthquakes. Near‐fault velocity pulses can provide a good constraint on the rupture speed. Here we decipher features of near‐fault velocity pulses and prove that the near‐fault fault‐parallel pulses can track the rupture front via dynamic rupture simulations. Moreover, we provide a new approach to identify the supershear rupture speed through calculating the onset time difference (OTD) between fault‐parallel (FP) and fault‐normal (FN) velocity pulses at near‐fault stations. Our dynamic rupture simulations of pure strike‐slip earthquakes reveal that a subshear rupture can be revealed from a positive OTD, while a steady supershear rupture speed can be identified from a negative OTD, and a supershear transition can be recognized from a large along‐strike variation in OTD. We apply this approach to the continuous near‐fault data set along the Amanos segment of the East Anatolian Fault during the 2023 Mw 7.8 Kahramanmaraş earthquake and identify the supershear transition between two stations. We further implement the approach to other individual near‐fault stations and find subshear or supershear ruptures reported by previous studies. Our study offers a new perspective to understand the near‐fault velocity pulses in strike‐slip earthquakes and shows the capability of near‐fault observations to constrain the rupture propagation even with individual stations.
Abstract Whether deformation in the northeastern Tibetan Plateau is accommodated primarily by pervasive lower‐crustal flow or by vertically coherent shortening remains debated, while most geophysical constraints reflect long‐term structure. Here, we combine five high‐precision terrestrial gravity campaigns from 2020 to 2023 with gravity‐topography spectral estimates of effective elastic thickness () and seismically constrained 3‐D crustal density inversions to examine regional crustal architecture and changes spanning the 2023 Jishishan earthquake. Repeated gravity observations reveal temporal evolution near the source region: a localized positive anomaly in the 2020–2021 difference field weakened during the following intervals and reappeared in the September–December 2023 field spanning the earthquake. The regional models delineate mechanical and density contrasts between the Alxa and Ordos blocks and the Qilian‐Qinling orogenic belt, together with mid‐to‐lower‐crust segmentation. Low‐density domains are laterally discontinuous and are interrupted by higher‐density structures that recur with depth near major faults. The September–December 2023 density‐model differences show vertically aligned anomaly domains at multiple crustal levels near the major fault system, although their geometry does not uniquely determine the direction or physical mechanism of mass redistribution. Taken together, static and time‐dependent constraints favor a spatially partitioned deformation regime in which localized crustal weakening coexists with fault‐associated vertical structural continuity, rather than regional deformation dominated by pervasive lower‐crustal channel flow. By adding repeated terrestrial gravity to crustal density and flexural constraints, this study provides a time‐dependent view of crustal deformation and earthquake‐spanning changes unavailable from static geophysical imaging alone.
Abstract Sulawesi hosts one of the most complex subduction systems in Southeast Asia, where active subduction beneath northern Sulawesi controls regional seismicity and volcanism. Although earthquake distributions outline the general slab geometry, the subsurface structure remains poorly resolved. Here, we invert approximately 300,000 P and S wave arrival times recorded by 144 stations to image Banggai‐Sula subduction system beneath northern Sulawesi and investigate the relation of Celebes Sea (CS) subduction to volcanic processes. The resulting tomographic model provides an improved image of the geometry of the Banggai‐Sula slab and reveals seismic velocity anomalies that may reflect partial melting and continental subduction. The model also suggests a possible connection between the Colo/Una‐Una volcanic system beneath Gorontalo Bay and CS subduction, although sparse northern seismicity limits the resolution of this structure. These results support tectonic interpretations of microcontinental subduction beneath Sulawesi, provide new constraints on the magmatic source of Colo Volcano, and offer an improved seismic velocity model for regional earthquake monitoring.