• 学术搜索
  • 科研智能体
    • Research Labs
    • AI 阅读
    • AI 文库
    • 深度研究
    • 学者亮点
  • 学术资源
    • AI2000
    • 期刊/会议
    • 学者库
    • 学术API
      MCP&Skill
    • 溯源树
    • 数据集
  • 知识沉淀
    • 学术空间
订阅小程序
旧版功能
aminer vip
开通会员低至0.73元/天
一次搞定AI科研
立即登录
  • English
  • 联系方式
    Composites Part C: Open Access

    Composites Part C: Open Access

    JournalISSN 2666-6820eISSN 2666-6820中科院 材料科学 3区

    年发文量

    研究主题

    论文(834)

    排序
    1Environmental Durability of Composite Laminates under Coupled Hygrothermal and Subzero Exposure: an Experimental Review
    Katherine Grigoriou, Khac Son Trinh, Nathaphon Buddhacosa

    Carbon fibre reinforced polymer (CFRP) composites are widely used in aerospace structures due to their high specific strength, stiffness, and corrosion resistance. However, their long-term durability is strongly influenced by environmental exposure, particularly under cyclic hygrothermal and subzero conditions encountered during service. While the individual effects of moisture ingress and subzero temperature exposure are established, their combined and sequential interactions remain insufficiently understood. This review synthesises current understanding of the isolated and coupled effects of hygrothermal ageing and subzero temperature exposure on CFRP laminates. Hygrothermal exposure drives moisture diffusion into the polymer matrix and can cause plasticisation, swelling and fibre–matrix interfacial degradation, hydrolysis depends on resin chemistry and exposure history. These changes can reduce matrix- and interface-dominated properties and depress the glass transition temperature. Subzero exposure can promote matrix embrittlement and generate residual stresses due to fibre–matrix thermal expansion mismatch, increasing stiffness in some systems while potentially reducing damage tolerance. Combined environmental histories can alter subsequent mechanical response through moisture-dependent matrix behaviour, thermal contraction mismatch and interfacial damage. Sequential and cyclic studies report both additional losses and little detectable additional degradation, depending on material, exposure history and testing conditions. Freezing of water retained in defects is a plausible contributor where freezable water is present, but quantitative synergy is not established for every system. The effects of combined exposure therefore need to be assessed against the corresponding individual exposures.

    2026
    引用
    AI阅读
    加入学术空间
    2Shear Behavior of RC Deep Beams with Web Openings Strengthened Using FRP and FRCM Systems: Experimental, Theoretical, and DIC Analysis
    Hamoun Akhami,Mahdi Nematzadeh, Moein Rezapour

    This study investigates the shear behavior of reinforced concrete (RC) deep beams with various web opening sizes (100, 150, and 200 mm) strengthened with glass fabric-reinforced cementitious matrix (FRCM) and carbon fiber-reinforced polymer (CFRP) systems. While previous research has focused on FRP-based strengthening, this work provides a direct comparison between externally bonded reinforcement (EBR) and near-surface embedded (NSE) techniques in FRCM and FRP strengthening systems. Thirteen RC deep beams were tested under four-point loading. Digital image correlation (DIC) was used to identify crack patterns and qualitatively assess deformation localization on the monitored beam surfaces. Experimental results indicate that for small and medium openings, FRCM-EBR was the most effective, increasing load-carrying capacity by up to 61% and dissipated energy by three to four times. Conversely, for large openings, CFRP-EBR provided the highest enhancement, increasing capacity by 57% and dissipated energy by over sixfold, though failure remained relatively brittle. The FRCM-NSE system proved less effective than FRCM-EBR, particularly for large openings, due to insufficient confinement. The DIC contours indicated more distributed surface deformation in the FRCM-EBR specimens and more localized deformation near opening corners or sheet terminations in the CFRP-strengthened specimens. Finally, an empirical cumulative model was developed, whose coefficients were calibrated using nonlinear least-squares regression of the 12 experimental results obtained in the present study. The comparison represents in-sample agreement after calibration; independent predictive capability remains to be established.

    2026
    引用
    AI阅读
    加入学术空间
    3Experimental Investigation and Modeling of Lateral Response in Basalt FRP-Confined Concrete
    Shahzad Saleem,Amorn Pimanmas,Tidarut Jirawattanasomkul,Zhang Dawei,Tamon Ueda

    Understanding the lateral expansion behavior of confined concrete is a prerequisite for evaluating the confining performance of emerging fiber-reinforced polymer (FRP) materials such as Basalt FRP (BFRP). This aspect is especially important for non-circular columns, where lateral expansion occurs highly non-uniformly. This study experimentally investigates the lateral expansion behavior of BFRP-confined concrete. Axial compression tests were carried out on 56 small-scale column specimens. Three parameters were varied in the test program, including number of BFRP layers (0, 3, 6, and 9), corner radius (0, 13, 26, and 75 mm), along with cross-sectional shape (circular, square, and rectangular). The experimental data comprised lateral strains recorded by horizontal linear variable displacement transducers (LVDTs) plus hoop strains captured by horizontally placed strain gages positioned around the cross-sectional perimeter. Results were also presented separately for strains at different locations (i.e., sides and corners) of non-circular sections to capture the variation in strain distribution. Square and rectangular sections, unlike their circular counterparts, showed a marked discrepancy between LVDT and strain gage readings. Overall, BFRP composite wrapping successfully limited the lateral expansion of confined concrete, showing a clear dependency on the studied parameters. Comparison of the test data against existing hoop strain–axial strain models showed that the Lin and Teng model, originally developed for FRP-confined square sections, overestimated the corner hoop strains of the BFRP-confined square and rectangular specimens beyond the elastic range. A modified model was therefore calibrated using the experimental database to predict the average and corner hoop strain–axial strain responses of BFRP-confined square and rectangular specimens up to FRP rupture.

    2026
    引用
    AI阅读
    加入学术空间
    4Characterization of Process Induced Anisotropic Mechanical Behavior in Additively Manufactured Wood Composites Using Inverse Finite Element Analysis
    Milinda Yapa Hamillage, Ahmed A. Ibrahim,Daniel J. Robertson

    Additive manufacturing using eco-friendly materials such as wood residues and binders like sodium silicate presents a promising alternative in the construction industry. This paper investigates the process induced anisotropic elastic behavior of a screw extrusion based additively manufactured wood–sodium silicate composite using a multiscale inverse finite element framework, where mesoscale tensile measurements are used to identify microscale elastic properties for evaluating bulk-scale flexural behavior. It was identified that elongated wood fibers present in the mixture orient in circular patterns during extrusion due to screw rotation. These fibers arranged in circular patterns are deformed during the deposition stage, producing modified orientation paths. A transversely isotropic reference volume element (RVE) comprising elongated wood fibers embedded in a wood–sodium silicate matrix was used to represent the microscale behavior of the composite. Meso-scale tensile tests were used to calibrate the microscale elastic properties through an inverse finite element analysis-based optimization procedure. The proposed constitutive model was validated using bulk-scale three-point bend tests, showing strong agreement between experimentally measured and numerically predicted flexural moduli. The mesoscale effective properties are influenced by manufacturing inconsistencies, and the resulting uncertainty was accounted for in the corresponding bulk-scale numerical simulations.

    2026
    引用
    AI阅读
    加入学术空间
    5Development of Novel Hybrid Flax and Self-Reinforced PLA Nonwoven Composites
    Anurag Pisupati,Thomas Laurent,Chung Hae Park

    While conventional flax/PLA composites offer attractive specific stiffness, their structural application is limited by low failure strain of flax fibers and relatively low strength of the PLA matrix. In this study, hybrid nonwoven composites combining cottonized flax fibers with self-reinforced PLA (SRPLA) filaments were developed, to improve the ductility without compromising the high mechanical stiffness of fully bio-based composites. Hybrid preforms are prepared as nonwoven mats where two types of fibers, i.e., flax fibers and SRPLA filaments, are mingled. In the SRPLA filament, two different PLA grades are integrated, i.e., low- melting-point PLA (LM-PLA) in the sheath zone and high-melting-point PLA (HM-PLA) in the core zone, whose polymer molecules are highly aligned in the axial direction to obtain enhanced strength and ductility. The nonwoven preforms are consolidated by hot compression molding to obtain composite laminates which are characterized in terms of residual void volume fraction and mechanical performance. Incorporation of SRPLA in addition to flax fibers significantly improved tensile and flexural failure strain, compared with the conventional flax/PLA composites. A four-phase Mori-Tanaka model and a continuum damage model capture the tensile response and provide insight into stiffness prediction, reinforcement recruitment, void-sensitive stiffness reduction, and phase-dependent damage evolution. The hybrid composites also exhibited higher specific tensile and flexural properties than the commercial glass-fiber SMC reference. These results highlight the potential lightweight performance of flax/SRPLA hybrid nonwoven composites for semi-structural applications requiring a balance of stiffness, strength, and ductility.

    2026
    引用
    AI阅读
    加入学术空间
    立即登录,查看全部 834 篇论文

    高被引作者

    作者引用发文
    Hom Nath Dhakal5627
    Christophe Bouvet47110
    Bruno Castanie4144
    Manjusri Misra39420
    Das Oisik37013
    J. Jefferson Andrew3553
    Amar K. Mohanty35318
    Ramy Harik2814
    Seeram Ramakrishna2782
    Vigneshwaran Shanmugam2708

    高产作者

    作者引用发文
    Manjusri Misra39420
    Amar K. Mohanty35318
    Das Oisik37013
    Ryosuke Matsuzaki11112
    Christophe Bouvet47110
    Qudeer Hussain589
    Erik Kappel909
    Mohammadali Shirinbayan488
    Bodo Fiedler1298
    Salim Belouettar278

    相关期刊

    Reviews on Advanced Materials Science
    Journal of Reinforced Plastics and Composites
    Journal of Industrial Textiles
    Journal of Composite Materials
    Applied Composite Materials
    Advanced Composite Materials
    Journal of Thermoplastic Composite Materials
    Science and Engineering of Composite Materials
    Journal of Adhesion
    FUNCTIONAL COMPOSITES and STRUCTURES