Electrohydrodynamic (EHD) processes are promising healthcare fabrication technologies, as evidenced by the number of commercialised and food-and-drug administration (FDA)-approved products produced by these processes. Their ability to produce both rapidly and precisely nano-sized products provides them with a unique set of qualities that cannot be matched by other fabrication technologies. Consequently, this has stimulated the development of EHD processing to tackle other healthcare challenges. However, as with most technologies, time and resources will be needed to realise fully the potential EHD processes can offer. To address this bottleneck, researchers are adopting machine learning (ML), a subset of artificial intelligence, into their workflow. ML has already made ground-breaking advancements in the healthcare sector, and it is anticipated to do the same in the materials domain. Presently, the application of ML in fabrication technologies lags behind other sectors. To that end, this review showcases the progress made by ML for EHD workflows, demonstrating how the latter can benefit greatly from the former. In addition, we provide an introduction to the ML pipeline, to help encourage the use of ML for other EHD researchers. As discussed, the merger of ML with EHD has the potential to expedite novel discoveries and to automate the EHD workflow.
Vegetable oils have been suggested in polymer science as an environmentally friendly feedstock existing in abundance in nature, with worldwide availability and low cost. Although they have been widely explored as building blocks for polymers synthesis, their functional roles as owners of potent biomolecules are less unexplored. Their ancient biomolecules support natural biological roles such as antioxidant, antibacterial, anti-inflammatory, and anti-tumor properties, which are considered a great promise for biomedical proposes. This comprehensive review provides an overview of grape, soybean, castor, sesame, olive vegetable oils where their native anti-inflammatory, anti-tumor, antioxidant, and antibacterial biological compounds bring health benefits that can be translated to the biomedical field. These plant oils are considered the most relevant for the molecular design of functional and high-performance biomaterials that can contribute to the reduction of carbon footprint. The representative examples of vegetable oil-derived biomaterials, their main composition, shape, and the processing technology will be covered and innovative strategies toward the development of new multifunctional polymeric materials for pharmacological patches, wound healing devices, drug carriers, and scaffolds for tissue engineering applications will be discussed.
Metal matrix composites have been recognized as a feasible approach to obtain a new generation of biodegradable Zn-based material. Nevertheless, there is a great challenge in achieving good dispersion properties of the bioactive reinforcements within zinc matrix. A novel and facile approach, namely graphene oxide (GO)-assisted hetero-aggregation, were developed to achieve uniformly dispersed nanoceramics in the Zn matrix, by using very low-content (0.03 vol%) GO as a linker between the Zn matrix and reinforcement. The negatively-charged GO becomes a suitable “bridge” connected the positively-charged metallic powder and bioactive reinforcement by charge neutralization in polarity solvent. Three kinds of reinforcements, including MgO, ZnO and CuO, were used to verify the feasibility of the above-mentioned method. As-sintered 3CuO/Zn matrix composites, which possessed uniformly distributed reinforcement, uniaxial compressive strength of 301.2 MPa, failure strain over 40%, moderate corrosion rate of 0.063 mm·y−1, acceptable cytocompatibility and antibacterial property, should be a useful material for orthopedic applications.
Degenerated cartilage tissues remain a burgeoning issue to be tackled, while bioactive engineering products available for optimal cartilage regeneration are scarce. In the present study, two-dimensional (2DS) poly(l-lactide-co-ε-caprolactone)/silk fibroin (PLCL/SF)-based scaffolds were fabricated by conjugate electrospinning method, which were then cross-linked with chondroitin sulfate (CS) to further enhance their mechanical and biological performance. Afterwards, three-dimensional (3D) PLCL/SF scaffolds (3DS) and CS-crosslinked 3D scaffolds (3DCSS) with tailored size were successfully fabricated by an in-situ gas foaming in a confined mold followed by freeze-dried. Gas-foamed scaffolds displayed high porosity, rapid water uptake, and stable mechanical properties. While all of the scaffolds exhibited good cytocompatibility in vitro; 3DCSS showed better cell seeding efficiency and chondro-protective effect compared to other scaffolds. Besides, 3DCSS scaffolds supported the formation of more mature cartilage-like tissues along with the best repair outcome in a rabbit articular cartilage defect model in vivo, as well as less expression level of pro-inflammatory cytokines, including interleukin (IL)-1β and tumor necrosis factor (TNF)-α than that of the other groups. Taken together, 3DCSS may provide an alternative therapeutic option for cartilage tissue repair.
Three-dimensional cellular aggregates can mimic the natural microenvironment of tissues and organs and obtaining them through controlled and reproducible processes is mandatory for scaling up and implementing drug cytotoxicity and efficacy tests, as well as tissue engineering protocols. The purpose of this work was to develop and evaluate the performance of a device with two different geometries fabricated by additive manufacturing. The methodology was based on casting a microwell array insert using a non-adhesive hydrogel to obtain highly regular microcavities to standardize spheroid formation and morphology. Spheroids of dental pulp stem cells, bone marrow stromal cells and embryonic stem cells showing high cell viability and average diameters of around 253, 220, and 500 μm, respectively, were produced using the device with the geometry considered most adequate. The cell aggregates showed sphericity indexes above 0.9 and regular surfaces (solidity index higher than 0.96). Around 1000 spheroids could be produced in a standard six-well plate. Overall, these results show that this method facilitates obtaining a large number of uniform, viable spheroids with pre-specified average diameters and through a low-cost and reproducible process for a myriad of applications.
Targeted drug delivery has become attention in chemotherapy during the last decade. The principle of chemotherapy seeks maximum effect to the desired site and the minimum impact to other undesired sites of action. The nanoparticulated drug delivery system progressed a lot in this aspect in the last twenty years. Plant-derived natural products and their semisynthetic analogues boosted chemotherapy through their excellent mechanistic approach to killing cancer cells. Keeping in mind the available molecular targets in colorectal carcinoma (CRC), in this article, we proposed a peptide conjugated novel polymeric nanoparticle to deliver garcinol against colorectal carcinoma. Integrin binding peptide iRGD, sequence c(CRGDKGPDC), has been selected as a targeting moiety, as most CRC overexpress integrins. We encapsulated garcinol in biodegradable polymeric nanoparticle (PLGA)-conjugated with iRGD peptide on the particles' surface, and analyzed its (iRGD-GAR-NP's) in vitro and in vivo antineoplastic potential against CRC in a comparative way with gracinol (GAR) and garcinol-loaded PLGA nanoparticles (GAR-NP). In vitro cellular studies on human CRC cell lines, HCT116 and HT-29, revealed the superior cytotoxic potential of iRGD-GAR-NP over GAR and GAR-NP. The IC50 value on HCT116 cells was reduced by 2.3 times compared to GAR upon the application of iRGD-GAR-NP. At equivalent doses, iRGD-GAR-NP induced higher apoptosis in HCT116 cells and caused blockage of cell cycle at G0/G1 phase of the same. iRGD-GAR-NP increased the apoptotic population of HCT116 cells by 2.5 times compared to GAR. In vivo biodistribution study uncoiled the ability of GAR-NP and iRGD-GAR-NP to accumulate in the colons of dimethyl hydrazine-induced CRC-bearing Sprague-Dawely (SD) rats. In vivo antitumor efficacy study demonstrated the better effect of iRGD-GAR-NP to reduce CRC tumor progression in experimental animals. The survival rate of animals was also increased by 166% in the case of iRGD-GAR-NP compared to CRC-bearing animals received no treatment.
The pH-responsive polymeric micelles (PMs) have been widely used as smart nano drug delivery systems to treat tumors. However, synchronously manipulating these PMs' self-assembly properties, drug release dynamics and tracing their pH-dependent intracellular fate remain challenges. Herein, we have first synthesized hyaluronic acid (HA) based glycopolypeptides modified by tetraphenylethylene (TPE) and a pH-sensitive doxorubicin (DOX) prodrug through Diels-Alder reaction, respectively. Then, the pH-responsive nanocomplexes (NCs) were prepared by coassembling the two obtained glycopolypeptides with different formulations. Controllable size within the range of 60???125 nm and morphologies like spherical, vesicular and oblate micelles can be easily accomplished by using this method; High drug encapsulating and loading efficiency can be easily realized and adjusted within a range of 86???97% and 7???25%, respectively; Acid sensitive drug release dynamics of these NCs are also tunable by using this way. Additionally, the programmed drug release induced by subtle pH variations can be extracellularly self indicated by detecting the blue AIE changes of the TPE units through fluorescence resonance energy transfer (FRET) effect between DOX and TPE. More importantly, the dynamic pH-triggered DOX release can be easily traced inside the tumor cells by visualizing blue emission changes of the TPE through the FRET effect. In addition, both the size and the shape can affect the endocytic routes of the NCs; The HA coated NCs targeting the tumor cells can effectively inhibit the proliferation of the HeLa cells. This work can provide a new route to acquire the stimuli-responsive self indicating PMs with the ability to adjust their self-assembly properties and their pH-triggered drug release dynamics, and even to simultaneously visualize the PMs' intracellular fate in a real-time.
It is still a challenge to develop a sponge that can efficiently control noncompressible bleeding to meet the emergency treatment and clinical demand. Herein, we combined the 3D printing sacrificial template method and freeze-drying technology to prepare polyvinyl alcohol/sodium alginate (PVA/SA) composite sponges with ordered microchannels and disordered porous structure. Compared with conventional sponges, the prepared sponge showed ultra-rapid water/blood absorption capacity and satisfactory mechanical properties. Furthermore, when the sponge was stuffed into a noncompressible wound and contacted with blood, it could accurately guide and quickly absorb a large amount of blood through the microchannels. Moreover, the platelets, red blood cells and coagulation factors would be enriched in the microchannels and microporous structure. In the SD rat liver noncompressible hemorrhage and femoral artery puncture injury model, PVA-SA composite sponge with 3D ordered/disordered porous structure showed enhanced hemostatic performance compared with commercial MPVA sponges. Depend on the special ordered/disordered porous structure, PVA-SA composite sponge could accelerate the blood convergence and promote coagulation. This design of special porous structure opened up a new avenue to develop hemostatic sponges for rapidly controlling noncompressible hemorrhage.
This study sets the stage for the therapeutic use of Ac5ManNTProp, an N-acetylmannosamine (ManNAc) analog that installs thiol-modified sialoglycans onto the surfaces of human neural stem cells (hNSC). First, we compared hNSC adhesion to the extracellular matrix (ECM) proteins laminin, fibronectin, and collagen and found preferential adhesion and concomitant changes to cell morphology and cell spreading for Ac5ManNTProp-treated cells to laminin, compared to fibronectin where there was a modest response, and collagen where there was no observable increase. PCR array transcript analysis identified several classes of cell adhesion molecules that responded to combined Ac5ManNTProp treatment and hNSC adhesion to laminin. Of these, we focused on integrin α6β1 expression, which was most strongly upregulated in analog-treated cells incubated on laminin. We also characterized downstream responses including vinculin display as well as the phosphorylation of focal adhesion kinase (FAK) and extracellular signal-related kinase (ERK). In these experiments, Ac5ManNTProp more strongly induced all tested biological endpoints compared to Ac5ManNTGc, showing that the single methylene unit that structurally separates the two analogs finely tunes biological responses. Together, the concerted modulation of multiple pro-regenerative activities through Ac5ManNTProp treatment, in concert with crosstalk with ECM components, lays a foundation for using our metabolic glycoengineering approach to treat neurological disorders by favorably modulating endpoints that contribute to the viability of transplanted NSCs.
In order to avoid the toxic and side effects on human body of long-term dissolution of metal ions from antibacterial titanium alloys, Au element with non-toxicity and non-side effect was selected as the alloying element to prepare a new Ti-Au alloy with strong antibacterial property. We produced Ti-Au(S) sintered alloy by powder metallurgy and Ti-Au ingot alloy by ingot metallurgy, and investigated the influence of the secondary phase on the relative antimicrobial properties and antibacterial mechanism in this work. The results indicated that the aged Ti-Au(T6) alloy and Ti-Au(S) sintered alloy exhibited strong antibacterial rate against S. aureus due to the formation of Ti3Au phases. In vitro cell culture (MC3T3 cells) experiments showed that Ti-Au alloys had good cytocompatibility and osteogenic properties. The following viewpoints of antibacterial mechanism are that the Ti3Au destroyed the ROS homeostasis of bacteria, causing oxidative stress in bacterial cells and preventing from the biofilms formation.
Bone defect augmentation with synthetic materials is crucial due to the unavoidable limitations of auto- and allografting. Although there are different promising synthetic materials for filling bone defects, the functionalization of these materials with cells is still challenging due to the lack of ideal cell sources. Here, we used stromal vascular fraction (SVF) heterogeneous cells that could be obtained from autologous adipose tissue to functionalize hyaluronic acid/gelatin-biphasic calcium phosphate (HyA-Gel/BCP) scaffolds for bone regeneration. The SVF cells were isolated, and the cellular composition and osteogenic differentiation potential were analyzed. Then, they were cultured on HyA-Gel/BCP scaffolds for in vitro characterization. An In vivo evaluation of the autologous SVF-loaded HyA-Gel/BCP scaffolds was performed using a rat skull critical-size defect model. The results showed that the SVF was successfully isolated and contained different types of cells, including mesenchymal stem like-cells with osteogenic differentiation ability. Also, the SVF cells could be cultured and expanded on the HyA-Gel/BCP scaffolds without affecting their viability. In vivo implantation of autologous SVF-loaded HyA-Gel/BCP scaffolds showed excellent bone regeneration compared to unloaded HyA-Gel/BCP scaffolds. Thus, autologous SVF-loaded HyA-Gel/BCP scaffolds could be a promising transplantable bone grafting material for bone tissue engineering.
One of the most common magnesium (Mg) applications in the biomedical field is in cardiovascular stents. Although Mg is an essential element for homeostasis, Mg is highly reactive, and locally high Mg concentrations can have toxic effects on the surrounding tissue. One strategy to circumvent the Mg toxicity is using coatings or surface modifications that prevent the leaching of excessive Mg ions. In the current study, commercially pure magnesium (c.p Mg) was modified through plasma electrolytic oxidation (PEO) to produce a protective coating primarily composed of Mg oxide (MgO) and Mg hydroxide (Mg(OH)2), which limits leaching of free Mg ions from the base material. As we intend to use this material to produce vascular stents, a biological evaluation of its performance is warranted. Primary human umbilical vein endothelial cells (HUVECs) and smooth muscle cells (SMCs) were the study object. The leaching of free Mg ions from the oxidized materials was investigated, as was its effect on local pH changes. We also investigated the influence of corrosion products, the effects of elevated free Mg concentrations and pH on the cellular behavior on the integrity of monolayers of HUVECs was studied in a static and dynamic model. Results showed that the harmful effect of Mg on cells due to changes in pH and a high concentration of Mg ions could decrease with the influence of flow diffusing corrosion products such as MgO, Mg(OH)2, and H2 among the system. Independently, Mg concentration and pH affected the cell activity of SMCs and HUVECs. Finally, to investigate the influence of leachables on vasomotor function, we exposed porcine aortic rings to PEO-modified Mg stents and assessed endothelial-dependent relaxation. Pure Mg reduced vasorelaxation from 100% in control samples to 30%. Oppositely, PEO-modified Mg did not affect the vasomotor function. Overall, we conclude from this study that the use of PEO coatings reduces the degradation rate of the material reducing the Mg release resulting in better cell viability and vessel function compared to the bare material.
HIV and hepatitis B are two of the most prevalent viruses globally, and despite readily available preventive treatments unforgiving treatment regimens still exist, such as daily doses of medicine that are challenging to maintain especially in poorer countries. More advanced and longer-lasting delivery vehicles can potentially overcome this problem by reducing maintenance requirements and significantly increase access to medicine. Here, we designed a technology to control the delivery of an antiviral drug over a long timeframe via a nanofiber based delivery scaffold that is both easy to produce and use. An antiviral prodrug containing tenofovir alafenamide (TAF) was synthesized by initial conjugation to glycerol monomethacrylate followed by polymerization to form a diblock copolymer (pTAF) using reversible addition-fragmentation chain transfer (RAFT). In order to generate an efficient drug delivery system this copolymer was fabricated into an electrospun nanofiber (ESF) scaffold using blend electrospinning with poly(caprolactone) (PCL) as the carrier polymer. SEM images revealed that the pTAF-PCL ESFs were uniform with an average diameter of (787 ± 0.212 nm), while XPS analysis demonstrated that the pTAF was overrepresented at the surface of the ESFs. Additionally, the pTAF exhibited a sustained release profile over a 2 month period in human serum (HS), suggesting that these types of copolymer-based drugamers can be used in conjunction with electrospinning to produce long-lasting drug delivery systems.
The objective of this work was to investigate the use of Biogran® functionalized with parathyroid hormone (PTH) 1-34 by sonochemistry for the local delivery of this anabolic agent to the implant site. The effects of Biogran® and topical administration of PTH 1-34 on peri-implant bone regeneration were evaluated from the microscale to ultrastructural levels in healthy (SHAM) and orchiectomized (ORQ). While some animals only received a titanium implant in their tibial metaphyses (CLOT group), in others the peri-implant defect was first filled with Biogran® either without or with PTH 1-34 functionalization (BG and BGPTH groups, respectively) prior to implant installation. Osseointegration was characterized from a biomechanical perspective by measuring the removal torque with the counter-torque technique. Micro-CT was used to evaluate the percentage of bone volume, trabecular thickness, number and separation, and bone-implant contact (BIC). Dynamics of new bone formation were assessed by measuring fluorochrome area, daily mineral apposition rate, and neoformed bone area using confocal laser microscopy. RT-PCR was performed to evaluate ALP and osteocalcin expression. The interface between newly formed bone and Biogran® was examined using scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) at the micro-and nanoscale, respectively, while elemental analyses were completed in SEM with energy-dispersive X-ray spectroscopy (EDS). STEM imaging demonstrated the intimate attachment of bone to Biogran® (nanoscale level). Overall, the results suggest that the effectiveness of the topical administration of PTH 1-34 at the implant site seems enhanced in osteoporotic bone, promoting peri-implant bone regeneration to comparable levels in healthy conditions.
Low-cost sensors to detect cancer biomarkers with high sensitivity and selectivity are essential for early diagnosis. Herein, an immunosensor was developed to detect the cancer biomarker p53 antigen in MCF7 lysates using electrical impedance spectroscopy. Interdigitated electrodes were screen printed on bacterial nanocellulose substrates, then coated with a matrix of layer-by-layer films of chitosan and chondroitin sulfate onto which a layer of anti-p53 antibodies was adsorbed. The immunosensing performance was optimized with a 3-bilayer matrix, with detection of p53 in MCF7 cell lysates at concentrations between 0.01 and 1000 U-cell. mL(-1), and detection limit of 0.16 U-cell mL(-1). The effective buildup of the immunosensor on bacterial nanocellulose was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface energy analysis. In spite of the high sensitivity, full selectivity with distinction of the p53-containing cell lysates and possible interferents required treating the data with a supervised machine learning approach based on decision trees. 'this allowed the creation of a multidimensional calibration space with 11 dimensions (frequencies used to generate decision tree rules), with which the classification of the p53-containing samples can be explained.
Polyester (PET) prostheses are commonly used in reconstructive vascular surgery. The most serious complication after implantation is early or late infection of the graft. Therefore, there is high demand to protect prosthesis against bacterial adhesion and biofilm development. For this reason, in this work PET prostheses were first coated by highly adhesive polycatecholamine layer. The grafts were then coupled with gentamicin and studied in relation to morphological and structural properties, biological safety (contact with blood, reaction of vascular endothelial cells (HUVEC), Danio rerio fish), drug release and antibacterial activity. Among two tested catecholamine monomers, L-DOPA was found to be more effective precursor in this process than dopamine. For L-DOPA, assistance of Cu2+, Mg2+ and Na+ ions seems to increase the amount of further immobilized drug. Coated prostheses exhibited greater human endothelial cell proliferation increase and lower cytotoxic effect than uncoated. The modification reduced the hemolysis observed for pristine commercial graft and limited the rate of abnormalities in D. rerio larvae, confirming the safety of the proposed modification. The coating allowed to double the amount of immobilized antibiotic in comparison with uncoated graft which resulted in increased antibacterial activity and reduced bacterial adhesion against 4 bacterial strains prevalent in biomaterials infections. Overall, poly(L-DOPA)-coatings deposited on PET vascular grafts can effectively functionalize these prostheses for higher safety in biomedical applications.
In vitro triple cultures of human primary osteoblasts, osteocytes and osteoclasts can potentially help to analyze the effect of drugs and degradation products of biomaterials as a model for native bone tissue. In the present study, degradation products of Magnesium (Mg), which has been successfully applied in the biomedical field, were studied with respect to their impact on bone cell morphology and differentiation both in osteocyte single cultures and in the triple culture model. Fluorescence microscopic and gene expression analysis, analysis of osteoclast- and osteoblast-specific enzyme activities as well as osteocalcin protein expression were performed separately for the three cell types after cultivation in triple culture in the presence of extracts, containing 5 and 10 mM Mg2+. All three cell species were viable in the presence of the extracts and did not show morphological changes compared to the Mg-free control. Osteoblasts and osteoclasts did not show significant changes in gene expression of ALPL, BSPII, osteocalcin, TRAP, CTSK and CA2. Likewise on protein level, no significant changes in ALP-, TRAP-, CTSK- and CAII activities were detected. Osteocytes showed a significant downregulation of MEPE, which codes for a protein playing an important role in regulation of phosphate homeostasis by osteocytes. This study is the first to analyze the effects of Mg degradation products on primary osteocytes in vitro, both in single and triple culture. Even if promoting effects on the three examined bone cell species were not found in the applied triple culture setup, it was shown, that Mg degradation products do not interfere with the activity of osteoblasts, osteoclasts and osteocytes in vitro.
