
The work presented in a recent paper by the authors [35] for a thermodynamically consistent and kinematic assumption free plate and shell formulation for small deformation and small strain based on the conservation and balance laws of classical continuum mechanics (CCM) is extended here for non-classical continuum mechanics (NCCM). This formulation incorporates additional physics due to internal rotations that arise due to the deformation gradient tensor. This physics is neglected in CCM, hence is absent in the plate and shell formulation of reference [35]. Consideration of this new physics requires modifications of the current balance laws as well as consideration of a new balance law “balance of moment of moments” (BMM) [2, 3]. Cauchy stress tensor becomes non-symmetric. Cauchy moment tensor is conjugate to the symmetric part of the rotation gradient tensor which exists now due to new physics. Balance of angular momenta yields additional three differential equations as part of the mathematical model. The new balance law (BMM) establishes symmetry of the Cauchy moment tensor. The new physics considered here exists in all deforming solid continua as it is due to the deformation gradient tensor, but is ignored in CCM. The consequence of this new physics is additional stiffness, hence additional strain energy storage and change in the time history of displacements and stress field compared to formulations based on CCM. The basic mathematical model for the plate and shell deformation consists of conservation and balance laws in $$\mathbb {R}^3$$ based on NCCM incorporating internal rotations. The associated finite element formulations for obtaining the solution of the mathematical model consists of : (i) geometry of the plate or shell described by the flat or curved middle surface (as done conventionally) and nodal vectors locating the top and bottom faces of the plate/shell (ii) the displacement field approximation that is p-version hierarchical in the plane as well as in the transverse direction (iii) integral form is constructed using Galerkin Method with Weak Form (GM/WF) and the corresponding element equations. The formulation presented here remains valid and accurate for thin as well as thick plate/shell and naturally reduces to the formulation of reference [35] based on classical continuum mechanics. Model problem studies and comparisons with the studies based on CCM formulation [35] will be presented in a follow up paper.
The focus of the present work is to present an analytical approach for buckling and free vibrations analysis of thick functionally graded nanoplates embedded in a Winkler-Pasternak medium. The equations of motion are derived according to both the third-order shear deformation theory, proposed by Reddy, and the nonlocal elasticity Eringen's model. For the first time, the equations are solved analytically for plates with two simply supported opposite edges, the solutions also turning helpful as shape functions in the analysis of structures with more complex geometries and boundary conditions. Sensitivity analyses are finally performed to highlight the role of nonlocal parameters, aspect and side-to-thickness ratios, boundary conditions, and functionally graded material properties in the overall response of plates and cylindrical shells. It is felt that the proposed strategy could be usefully adopted as benchmark solutions in numerical routines as well as for predicting some unexpected behaviors, for instance, in terms of buckling load, in thick nanoplates on elastic foundations.
In this paper, the subject of the principle of causality and the physical realizability in the wave motion characteristics within a linear nonlocal elastic medium is examined. The principle of primitive causality is examined via Kramers–Kronig (K–K) relations and the principle of relativistic causality or the Einstein causality is examined via wave motion responses. Gradient as well as integral type nonlocality has been considered. Methodology here involves a Fourier frequency domain based spectral analysis and the wave motion characteristics include: wave modes, group speeds and frequency response function. In general, due to existence of atleast one of the non-physical features in the characteristics, violation of the causality is observed. The non-physical features include: existence of infinitesimally small or zero speeds; existence of very large or infinite speeds; existence of negative speeds; and absence of attenuation of waves. Violation to the primitive causality takes place as a disagreement to the K–K relations, either due to existence of negative and/or zero group speeds or due to absence of wave attenuation in the possible wave modes. Violation to Einstein causality is observed due to existence of infinitely large group speeds. Agreement to the primitive causality is achieved due to the presence of both wave dispersion and wave attenuation in the wave modes. Although existence of infinitely large group speeds violates Einstein causality, however, violation of the primitive causality is not observed. Upon considering only the physically realizable wavemodes, it is observed that, a local Neumann type boundary condition may be sufficient to conduct a wave motion study in a class of nonlocal boundary value problems. As an application of the primitive causality to the Fourier domain analysis, the wavenumbers from the K–K relations are utilized to demonstrate a mitigation effect of certain non-physical features in the wave motion responses.
In the present work, flexural response of functionally graded plates subjected to transverse loads have been investigated using the meshless natural neighbor Galerkin method (NNGM). The plate formulation has been developed based on the Reddy’s (Mechanics of laminated composite plates and shells: theory and analysis, 2nd edition, CRC Press, Boca Raton, 2014) third-order shear deformation theory (TSDT) using the von Kármán nonlinear strains. The governing equations of the TSDT have been derived accounting for the length scale/size effects considering the Eringen’s nonlocal stress-gradient model (Eringen in Microcontinuum filed theories—I: foundations and solids, Springer-Verlag, 1998). The C 1 continuous shape functions have been computed using the sibson’s interpolant and generalizing a Bezier patch over the domain. The nonlocal nonlinear model of the resulting governing equations has been developed, and Newton’s iterative procedure is used for the solution of nonlinear algebraic equations. The mechanical properties of functionally graded plate are assumed to vary continuously through the thickness and obey a power-law distribution of the volume fraction of the constituents. The variation of volume fractions through the thickness have been computed using two different homogenization techniques, namely, the rule of mixtures and the Mori–Tanaka scheme. A detailed parametric study to show the effect of side-to-thickness ratio, power-law index, and nonlocal parameter on the load-deflection characteristics of plates have been presented. The central deflections obtained using (NNGM) have been compared with the results from literature based on finite element method. The results have been compared with the two homogenization schemes and also with results computed with the first-order shear deformation theory (FSDT) to show the accuracy of nonlocal nonlinear formulation based on TSDT.
The paper investigates the post-buckling behavior of micro-cantilevers within the framework of consistent couple stress theory. The theoretical foundation for carrying out the analysis is formulated in terms of moment and curvature which is apt for solving thin beam problems. A differential equation governing the deflection of micro-cantilever subjected to different boundary conditions is obtained from the developed moment-curvature relationship. Axially loaded micro-cantilevers are solved by using an efficient semi-analytical method which involves removal of singularity. On the other hand solutions to eccentrically loaded micro-cantilevers are determined with the help of purely numerical approach based on iterative shooting method. Profiles of post-buckled micro-cantilevers subjected to different loading conditions are furnished. The obtained results for the micro-cantilever display strong size-dependency due to presence of the material length scale parameter in the developed model. Also the non-classical theory results tend to those from classical theory when the length scale parameter is negligible as compared to the characteristic length of the structure.