
Abstract This paper deals with the wave-induced cyclic response of a poro-elastic seabed (by means of oscillations of the pore-fluid pressure, soil displacement, effective normal stress and shear stress in a soil skeleton) due to a surface sinusoidal water-wave propagating over a seabed of finite thickness. The main existing analytical solutions to the governing problem, assuming a dual-elastic system of the two-phase (pore-fluid and soil skeleton) seabed medium, are critically discussed, pointing out their limitations, doubtful items, and meaningful errors. The amplitude phenomena is particularly studied as an immanent part of any complex-valued analytical solution of a cyclic nature. A series of calculation analyses, performed for the North Sea wave and soil conditions, has indicated problematic results as far as high values of the shear modulus of soil are concerned. An application of meaningfully different values of the degree of saturation, obtained for one and the same calculation example, has caused many additional doubts as to the quality of the tested analytical solutions.
Abstract Precise long-term rainfall prediction is important for agricultural planning, climate resilience, and reducing disaster risk, particularly for countries like Nigeria with diverse regimes of rainfall. In this research, the potential of machine learning (ML) and statistical models to predict monthly univariate rainfall in 24 Nigerian stationswas evaluated. Model training employed historical rainfall data (1960–1999), while validation was carried out for 11 years (2000–2010). SARIMA ( p; d; q ) ( P; D; Q ) s models were used in Minitab ® , R, and Python, and the most important parameters ( p; d; q; P; D; Q ) were tuned manually and by using auto.arima(). ML models such as feedforward neural networks, adaptive neuro-fuzzy inference systems, support vector regression and random forest were utilized in MATLAB ® and R with hyperparameter-tuned models. Model performancewas evaluated in using statistics such as root mean square error ( RMSE ) and coefficient of determination ( r 2 ). SARIMA performed best in areas where rainfall variability was minimal. Nguru (12.03°N), the area with the lowest average monthly rainfall (35.71 mm), showed the highest SARIMA estimation with RMSE of as low as 7.84mm and r 2 of as high as 0.85. ML models underperformed in capturing seasonal dynamics. For instance, SVR failed to model temporal trends effectively, while random forest produced nearly constant outputs across all years. Adjustments to SARIMA parameters (e.g., setting seasonal differencing D = 0 or Q = 1) were essential in reducing unrealistic forecasts. The findings demonstrate that SARIMA, with proper tuning, is better suited for univariate rainfall forecasting in Nigeria than non-customized ML models. Forecast reliability strongly correlates with regional rainfall characteristics and model sensitivity to seasonality.
For flood protection infrastructure to be designed effectively, it is essential to accurately assess the maximum discharge ( Q max ) in Algerian wadis and watercourses. In the absence of direct field measurements, reliance on foreign methodologies is common. However, these methods often overlook the specific characteristics of hydrological systems in Algeria leading to significant inconsistencies and complicating methods choice. Accordingly, the crucial question that arises is: which methodology provides the most reliable ( Q max ) estimates for the purpose of designing effective flood defenses? Therefore, this paper explores the estimation of maximum discharge in Wadis when direct flow rate data is unavailable. The proposed model, outlined in equation (3), is developed through statistical modeling and incorporates key factors such as watershed area (A) and rainfall intensity ( P tc ). The model correlates with observed discharge values by utilizing data from Algeria’s National Water Resources Agency, covering 60 Wadis across diverse regions. This approach outperforms existing models, achieving a notably low mean normalized error of 10%, signifying substantial improvements in accuracy.
Abstract Irrigation development focused on implementing ecologically sound and nature-based solutions was explored. This approach is crucial in addressing the pressing need to conserve water and electricity resources, aligning irrigated farming practices with current global challenges and sustainable development goals. Unlike traditional methods, it is essential to view water and electricity resources as integral components of irrigation efficiency from a resource-ecological perspective. A computer experiment involving predictive and simulation modeling was conducted to assess the feasibility and potential cost savings of adopting resource-ecological principles in irrigation practices. The study evaluated the resource-ecological efficiency of different sprinkler irrigation regimes based on irrigation reliability, which measures deviations from projected irrigation and watering rates. Multicriteria regression analysis revealed a strong correlation ( R 2 = 0:874) among various factors influencing irrigation efficiency. Results indicated that implementing different levels of irrigation reliability could significantly improve technological efficiency, with crop productivity reductions ranging from 10.80% to 18.06% and water and electricity cost savings of 27% to 48%. These findings support the integration of nature-based and ecologically effective irrigation solutions to promote sustainable agriculture in the face of global challenges such as climate change, water scarcity, food insecurity, and energy shortages.
Abstract In the modern global field of underground water treatment, the technology of biological iron removal is gaining more and more recognition, as it has a number of significant advantages compared to traditional ones, namely: increased rates of Fe(II) oxidation, filtration, as well as a large dirt capacity of the filter filling. Therefore, the search for methods to activate cellular metabolic processes has practical implications. One of the possible ways of such activation is by using the effect of a constant magnetic field (CMF) on communities of ferrobacteria attached to the contact loading of bioabsorbents made of synthetic material. Based on the results of the research, it has been established that the CMF with an induction value of 5–10 mT is the most favorable for the development of ferrobacteria colonies, while the induction of 130–150 mT, on the contrary, inhibits their development. There has been studied the effect of CMF with the power of 10–15 mT on the e ciency of combined processes of treatment from dissolved organic compounds and Fe(II). The results of comparative studies on the effectiveness of various technological schemes are presented. It was found that with the use of CMF with a magnetic induction of 5–10 mT, the effect of iron removal increases by 20%. There has been developed biotechnology for treating weak acid (pH 6.3–6.5), iron-containing (Fe2+ 6–8 mg/dm3) underground waters which is based on the combinatorics of physical (aeration, influence of constant magnetic field) and biochemical (use of ferrobacteria consortia) methods. The main technological parameters of the process: filtration rate for the bioreactor 7–10 m/h, for filters 6–8 m/h; duration of filter cycles for the bioreactor is 2–3 weeks; for filters 44–48 hours have been determined. The theoretical aspects of the impact of CMF on the processes of biochemical treatment of underground water have been substantiated.