
Abstract In this work the structure and properties of composite rollers with surface layer made of hard alloy were studied. The rollers were made by the powder metallurgy method with sintering during pressing and the presence of a certain liquid phase during sintering (semi-liquid sintering). WC-Co and TiC-Ni-Fe materials were used as hard alloys. Iron-carbon and iron-nickel materials were used as soft base. All of the composite layers were formed in one process. The structure of base materials and border layer of these composites were studied. Investigations of thermocycling sustainability of these composite samples were carried out.
Abstract In the industrial sectors, pipelines have been used as the most economical and safe means of transporting oil and gas (Pipelines). However, the number of accidents has increased considerably as their use has increased. As a result of the operating load and the pressure used, the thickness of the tube must be increased and the mechanical characteristics improved. This approach was applied to predict the growth of crack effect in samples of two pipelines at given thicknesses and pressures. We created cracks with deferential dimensions in both API X80 steel pipelines, with an application of deferential internal pressures. For the simulations, we used the code ANSYS.
The objective of this study is to present a numerical modeling of mixed-mode fracture in isotropic functionally graded materials (FGMs), under mechanical and thermal loading conditions. In this paper, a modified displacement extrapolation technique DET was proposed to calculate the stress intensity factor (SIFs) for isotropic FGMs. Using the Ansys Parametric Design Language, the continuous variations of the material properties are incorporated by specified parameters at the centroid of each element. Four numerical examples are presented to evaluate the accuracy of SIFs calculated by the proposed method. Comparisons have been made between the SIFs predicted by the DET and the available reference solutions in the current literature. A good agreement is obtained between the results of the DET and the reference solutions.
Abstract Aluminum alloy is a very useful material in light manufacturing. Friction stir welding (FSW) is a solid state assembly process that is achievable for this material. This work aims to characterize the quality of the weld joint by an operation of shaping (folding), it aims to study the rate of elastic return in this weld joint after a folding operation. In this context, the elastic return for the folding process has been modeled using experimental tests under optimal welding conditions.
Abstract The subject of the article is the suitability analysis of a measuring system, specifically the Zeiss MMZ T 20 30 16 coordinate-measuring machine utilizing an extended procedure. The article outlines the measurement preparation process and presents the research station as well as the procedure for determining Repeatability & Reproducibility (R&R).