
In recent years, demand for insect-scale MAVs (Micro Aerial Vehicles) that can fly in confined spaces has been increasing at disaster sites and agricultural sites, and research on MAVs has been active. In this study, we develop an insect-scale flapping winged flying robot using a micro ultrasonic motor with high torque density and simple structure. The prototype motor employs the vibration mode of bending as its principle, and uses a stator with piezoelectric elements attached to a metal rectangle of size 1 mm × 1 mm × 3 mm. Experimental results showed that this motor could achieve a rotational speed of 25,000 rpm with a voltage of 80 V_p-p applied. Then, a flapping mechanism with elastic links was designed. The total weight of this flapping mechanism is less than 100 mg. Frictional torque was measured, with a maximum of 38 μ Nm.
Most robotic hands are equipped with relatively simple force sensors to detect contact with manipulated objects. Very often, they are only attached to the finger's tips and are not sufficient to measure the interaction forces for all shapes of objects and grasp types. The goal of this research is to develop a sensory glove named PUT-Tactile-Glove that can be used on the existing robot's hands to enhance the sensing capabilities of the robot. The proposed sensory glove can measure forces acting on an object held in the hand. The robotic glove can also be used on the human hand to collect reference data for training robots to interact with the objects. The paper presents the mechanical design of the glove, the results of the sensor's calibration, the software system for ROS2, and the results of the experiments performed with the glove while grasping various objects.
With the increasing capabilities of robotic hardware, the demand for software to fully utilize these becomes apparent. To better utilize the full movement potential, a planning concept for free climbing motions is introduced. For this, classical approaches like rapidly-exploring random trees (RRT) are combined with the versatility of neural networks and reinforcement learning. With this, the traceability of classical algorithms, combined with the versatility of neural networks, can be used to generate complex climbing motion paths.
This paper studies the design and assessment of an innovative soft-rigid robotic gripper for handling pancakes with a focus on achieving a high success rate in gripping while preserving the pancake's original shape. Being a hybrid softrigid design, the gripper benefits from being flexible so as not to damage the pancake and has enough rigidity to grip a stack of pancakes at a time. The gripper is designed to be versatile, accommodating different pancake sizes through part exchanges, and offers convenient independent replacement of the finger without requiring the entire gripper to be replaced. The gripper is manufactured using 3D printing, exploiting Flexible 80 A for its flexible components and polylactic acid (PLA) for the rigid elements. Particularly, the gripper features a shovel-like fingertip design, aimed at gently scooping pancakes to prevent undesired compression caused by excessive pressure. To assess the design's feasibility and functionality, finite element analysis (FEA) is conducted. The gripper is experimentally validated using various types of pancakes as well as using FEA to assess its capabilities. Experimental trials involving real pancakes were conducted to evaluate the gripper's performance to hold efficiently single and stacks.
Miniature crawling or driving robots have been developed in recent years for off-road tasks such as search and rescue, excavation, and reconnaissance. Their small dimensions, low weight, and high navigability enable their deployment in large numbers to quickly inspect large areas. There are some examples of palm-sized robots that we designed and created that can crawl or drive, including instances from a particular family of Sprawl-Tuned Autonomous Robots (STAR), i.e., STAR [1] and Rising-STAR [2]. These robots can actively adjust their sprawl angle to change the geometry between wheels and "whegs" in different planes. Using their unique configuration, these robots can move on varying terrain surfaces and traverse obstacles. The Rising-STAR has been simulated and examined with different types of machine learning algorithms [3, 4], to improve its abilities in different aspects.