
Mechanized citrus planting requires real-time operational monitoring and spatial traceability. This study aimed to develop and field-validate a retrofit embedded system for automatic counting and GNSS georeferencing of orange seedlings. The system integrated an ESP32, an inductive sensor for detecting seedling-release events, a u-blox NEO-M8N GNSS receiver, a human–machine interface, and an algorithm for automatic field-plot identification. Each detected event was associated with spatial and operational information and stored on a microSD card. The system recorded 3,839 events, of which 99.87% contained valid GNSS coordinates. Across seven field evaluation dates, the mean field-plot association rate was 83.8%, ranging from 24.8 to 99.9%, and productivity ranged from 390 to 650 seedlings h?¹. Spatial identification was limited by GNSS accuracy near field-plot boundaries. The proposed architecture demonstrated the feasibility of generating individual georeferenced planting records for traceability and operational monitoring.
The objective is to compare continuous mathematical models for representing wind speed behavior in Dourados, Mato Grosso do Sul, Brazil. The raw data were obtained from a semiautomatic weather station located on the campus of the Grande Dourados Federal University (UFGD). An appropriate statistical methodology was used to relate the discrete raw data to continuous mathematical functions (probability density functions). The conclusions indicate: a) a predominant northeast (NE) direction; b) a representative local wind speed of 1.6 m.s-1 according to the Rayleigh model and 1.4 -1.8 m.s-1 according to the Weibull model. The Rayleigh function shows a poor fit to the raw data, with a DPower ~1 W.m-2 lower than that obtained with the Weibull model. The Weibull function better represents the behavior and intensity of wind speed, both qualitatively and quantitatively, and is therefore recommended for estimating wind power using local data. The power density is on the order of 10 W·m?², corresponding to the theoretical power per unit rotor area of a wind turbine installed in the municipality.
The facilities or areas designated for composting laying hen manure are important structures within egg production systems. Due to the potential generation of gases and nutrient losses during manure management, proper control of emissions is essential to mitigate environmental impacts and improve the operational safety of the system. The objective of this study was to quantify nitrogen emissions and losses, including nitrous oxide (N?O), nitrate (NO?), nitric oxide (NOx), and ammonia (NH?), as well as methane (CH?) emissions and phosphorus (P) losses from laying hen manure in a semi-open composting area of an egg-producing farm. Manure production data used as input information were provided by the farm. Emissions and nutrient losses associated with manure management were estimated using the guidelines of the Intergovernmental Panel on Climate Change (IPCC) for national greenhouse gas inventories. The results were calculated considering annual production and two functional units: 1,000 hens produced in the rearing facilities and one ton of eggs produced in the laying facilities. The estimated emissions and nutrient losses enabled the development of an emission inventory for manure management in an intensive cage egg production system. The estimated values were 4.85 kg N?O, 68.45 kg NO?, 48.92 kg NH?, 12.00 kg NOx, 27.01 kg CH?, and 3.56 kg P?O? per 1,000 hens produced in cages. For the functional unit of one ton of eggs produced, the estimated values were 1.99 kg N?O, 31.91 kg NO?, 22.42 kg NH?, 5.50 kg NOx, 3.18 kg CH?, and 1.21 kg P?O?. These results contribute to manure management inventories in egg production systems and may support future life cycle assessment studies under intensive cage production conditions.
Climate change has increased rainfall irregularity, making water management critical for soybean productivity. Microalgae-based biostimulants have been proposed to mitigate the effects of water restriction on plant physiology. This study evaluated the effect of foliar application of Scenedesmus obliquus on transpiration and water use efficiency in soybean plants under contrasting water regimes. The experiment was conducted under controlled conditions using the cultivar Embrapa 59 grown in sandy soil (65% sand). A completely randomized design was adopted with four replicates, combining three biostimulant doses (0, 0.3, and 1.2 g L?¹) and two water management regimes (with and without deficit). A 30-day water deficit was imposed from the R1 stage. Transpiration rate (E) and water use efficiency (A/E) were measured using an infrared gas analyzer. Microalgae application significantly increased water use efficiency, particularly under water deficit (up to 250%), and helped maintain transpiration compared to the control. The highest dose produced the most favorable responses, indicating the potential of this biostimulant under water-limited conditions, although further studies are needed to standardize application protocols.
Coffee is one of the most important global commodities, with Brazil leading its production. To ensure its quality and commercial viability, off-season storage is essential. However, inadequate moisture content leads to grain deterioration. The aim of this study was to analyze the hygroscopic behavior of hulled coffee, evaluating mathematical models for predicting moisture adsorption isotherms. The research was conducted using Yellow Bourbon coffee, applying the static method with saturated saline solutions to control relative humidity at temperatures ranging from 10 to 50 °C. Twelve mathematical models were evaluated regarding their fit to the experimental data. The results showed that the adsorption isotherms of hulled coffee follow a sigmoidal pattern, indicating that equilibrium moisture decreases with increasing temperature. The Harkins model presented the best fit, with a coefficient of determination (R²) of 0.998 and a standard error of estimate (SE) of 0.448, outperforming other widely used models. Visual validation of the model confirmed its high accuracy, with predicted values closely aligned with the experimental data. It is concluded that the Harkins model is the most suitable tool for optimizing the storage of hulled coffee, providing a technical basis for sustainable moisture management and the preservation of grain quality.