
Technische & Auml;nderungen sind ein zentraler Bestandteil der Produktentwicklung. Mit der zunehmenden Komplexit & auml;t moderner Produkte und Entwicklungsprozesse wird der Umgang mit technischen & Auml;nderungen jedoch zunehmend herausfordernd. Sie stellen nicht nur bedeutende Kosten- und Risikotreiber dar, sondern sind zugleich ein wesentliches Instrument zur St & auml;rkung des Innovationspotenzials von Unternehmen. Eine zentrale Voraussetzung f & uuml;r einen effektiven Umgang mit technischen & Auml;nderungen ist ein einheitliches Begriffsverst & auml;ndnis innerhalb der Organisation. Trotz ihrer hohen Relevanz existiert bislang weder in der Literatur noch innerhalb der Karlsruher Schule f & uuml;r Produktentwicklung (KaSPro) ein konsistentes und allgemein anerkanntes Verst & auml;ndnis des Begriffs ,,technische & Auml;nderung". Ziel dieser Arbeit ist es, auf Basis der in KaSPro verankerten Ans & auml;tze, Prozesse und Modelle ein konsistentes Begriffsverst & auml;ndnis zu entwickeln. Hierzu werden relevante Aspekte innerhalb der KaSPro identifiziert, bestehende Definitionen aus der Literatur hinsichtlich ihrer Eignung analysiert und ein Begriffsrahmen vorgeschlagen. Das entwickelte Begriffsverst & auml;ndnis verortet technische & Auml;nderungen disziplin & uuml;bergreifend & uuml;ber den gesamten Produktlebenszyklus und ber & uuml;cksichtigt deren system- sowie entwicklungsgenerations & uuml;bergreifenden Charakter. Damit leistet diese Arbeit einen wesentlichen Beitrag zur Schaffung eines ganzheitlichen Verst & auml;ndnisses technischer & Auml;nderungen im Kontext komplexer Entwicklungsprozesse.
Fuel cell electric vehicles offer a promising alternative to battery electric vehicles and are characterized, among other things, by rapid refueling. Recirculation in the H2 supply system is crucial for efficient and safe fuel cell system operation in automotive applications. Typically, an ejector is used for this purpose, which, among other things, recirculates unused H2 from the fuel cell outlet to the fuel cell inlet. The ejector in the H2 supply system uses the H2 inflow from a high-pressure tank as a propellant. A component test bench is developed to characterize ejectors, which enables a full-factorial measurement. In addition, the four critical operating parameters are identified: Primary flow, gas composition in the secondary flow, discharge pressure, and pressure difference between secondary and discharge pressure. The results of the measurements are brought into the context of fuel cell systems so that an operating strategy can be derived for any H2 supply system with the characterized ejector. Depending on the primary flow rate through the ejector, an optimal outlet pressure for recirculation is determined. The H2 molar fraction in the secondary path is identified as a key parameter for recirculation in the H2 supply system. The ejector characterization method of this contribution makes it possible to compare the recirculation capability of an ejector within different H2 supply systems without the need for a complete fuel cell system test bench.
Low-alloy steels have become a mainstay in critical components like gears and shafts, due their cost-effectiveness and desirable mechanical properties. However, their inherent limitations highlight the need for innovative solutions to enhance their mechanical properties, particularly for applications demanding exceptional performance and durability. In all manufacturing processes, there are active forces to make the desired transformation of a given material, generating friction and, consequently, heat, to provide the formation, or not, of a chip. When these forces cease to act on the material, that is, when it remains at rest, residual stress is generated due to the efforts that led to the change in its structure (crystalline lattice). Stresses have a major effect on the physical, mechanical and chemical properties of the surface layer. Therefore, an appropriate residual stress can be obtained by selecting appropriate process parameters. Several studies have investigated the effect of machining processes separately on residual stress behavior. Based on this, this study aims to contribute to the advancement of research in gear manufacturing by presenting an investigation conducted in the automotive industry, in which residual stress was evaluated sequentially as a function of each stage of the manufacturing process—hobbing → shaving → carbonitriding—in manual transmission reduction gears manufactured from low-carbon manganese steel. It was demonstrated that different types of residual stresses are intrinsic to certain stages of the manufacturing process and that their transformations are interdependent, almost like a “memory” accumulated in each constructive phase of the component.
In the Priority Program 2305 of the German Research Foundation, so-called Sensor-integrating Machine Elements (SiME) are to be developed. These are essentially highly standardised components with integrated microelectronics. This article presents the development of a model-based construction kit to support the design of integrated sensor systems for these new machine elements. A methodical procedure for collecting the development data required for modelling the construction kit is presented. Use cases, system architecture and module diagrams were developed and modeled for the machine element bolt. These are then linked in SysML models to enable sensor systems to be configured in line with requirements. An exemplary prototype of a sensor-integrating bolt has been developed an validated in a test environment. The modeling of modular system architectures deepens the understanding of the underlying mechatronic system and allows for application-specific configuration of sensor systems by taking differentiation features into account while exploiting synergy potentials between SiME. This configuration represents an approach to making sensor-integrating machine elements accessible to a broad range of users with different requirements.
Rotate vector (RV) reducer is developed from cycloidal pinwheel reducers, widely applied in industrial robots and the aerospace industry, and relies on its cycloid-pin mechanism for overall performance. Moreover, the tooth profile curvature further dominates the contact stress and wear, necessitating in-depth exploration of cycloid tooth curvature and profile design. This study focuses on the cycloid gear of a CRV-20E reducer as a case study to analyze the curvature of the cycloid tooth profile. First, based on differential geometry, the cycloid profile equation was derived via coordinate transformation. The concave–convex characteristics of cycloid profile were analyzed by differential geometry method to obtain the inflection point expression. Then, the effects of mechanism parameters such as eccentricity, roller distribution radius, roller radius, roller number, and modification parameters on inflection point position and cycloid curvature were systematically explored. Finally, with the curvature variation and curvature derivative as the objectives, an optimization model for the cycloid tooth profile was established and solved based on genetic algorithm. The optimal parameter combination was thus obtained, and meshing characteristics before and after optimization were comparatively analyzed. The optimized profile reduced curvature variation by 13.8