
Introduction: Hydrogen sulfide (H2S) is a toxic gas that has adverse effects on human health and equipment. One of the methods for eliminating of H2S gas is the use of adsorbent substrate. In this study, the effect of adding iron oxides including ferric (Fe2O3) and magnetite (Fe3O4) nanoparticles to ZSM-5 zeolite substrate was investigated on the efficiency of H2S elimination from the air stream. Methods: In this study, Fe2O3 and Fe3O4 nanoparticles were impregnated in ZSM-5 zeolite in two weight ratios of 3% and 5%. The structural properties of the substrate were studied using XRD, BET and SEM. Then, the efficiency of substrate in removing H2S from air was studied while H2S gas was injected in to a pilot setup, in concentrations of 30, 60, 90 and 120 ppm at three bed temperatures of 100, 200 and 300 o C. Results: The accuracy of combination and the morphology of inoculated zeolite was confirmed using XRD and SEM. The BET test also showed that the loading of iron oxide nanoparticles on the substrate educed the substrate surface area. The results revealed that increasing the percentage of nanoparticles and increasing the temperature from 100 ° C to 300 ° C increase the time of breakthrough point. The maximum adsorption capacity was obtained equal to 44.449 (mgH2S/g zeolite) for ZSM-5/Fe3O4-5% substrate at 120 ppm concentration. Conclusion: Iron oxide nanoparticles inoculated in ZSM-5 zeolite substrate increase the capability of eliminating of H2S gas at high temperatures and therefore can be used as a suitable method for the elimination of similar pollutants.
Introduction: Occupational health is one of the important issues that can affect productivity and economic development of an organization. This study aimed to determine the effect of didactic interventional Ergonomic-Safety Program on workers' productivity of an assembling industry. Methods and Materials: This interventional study was conducted among 54 workers of assembling part of an electronic industry. First, QEC method was used for the ergonomic assessment of workplace and Hersey-Goldsmith questionnaire was applied for assessment of productivity. Then, a comprehensive program was provided using findings of first stage assessment and identifying of existing failures. Second, assessment of ergonomic conditions and productivity was, for a second time, done using the similar tools, QEC method and Hersey-Goldsmith questionnaires after three month of interventions. Data was analyzed using R software. Results: Mean total productivity score and mean whole body score of QEC were 75.24 and 99.40, respectively, before intervention phase. In the after intervention phase, mean total productivity score and mean whole body score of QEC were 80.16 and 97.92, respectively. Data analysis by paired-samples t-test showed that difference of productivity score in before and after intervention phase was significant (P-value<0.05). But, difference of whole body score of QEC score in before and after intervention phase was not significant (P-value>0.05). Conclusion: Implementing the Ergonomic-Safety intervention had a positive effect on the productivity score whereas had no significant effect on the general conditions of body limbs.
Introduction: Patients' safety culture indicates the extent to which the staffs prioritize the safety of patients. In medical centers, it is very important to pay attention to the patients' safety. Hence, the patients' safety culture should be examined and improved. One of the factors which lead to the improved patients' safety culture is structural empowerment. Structural empowerment refers to adjusting workplace structures by managers and facilitating the staffs' access to organizational facilities. In other words, structural empowerment refers to the staffs' access to four environmental factors (i.e., opportunity, information, support, and resources) in the organization. The objective of the present study was to investigate the relationship between the dimensions of structural empowerment and patients' safety culture. Material and method: The current study was descriptive-correlational research method, and the population included all staffs (i.e., 275 individuals) in the nursing department of a public hospital in Ahvaz. The research sample included 221 staffs who were selected through stratified random sampling. The data were collected through standardized tools, including Effective Working Conditions (the second version), and Patients' Safety Culture in Hospitals questionnaires. The reliability of the questionnaires was examined through Cronbach's alpha. Pearson correlation coefficient, multiple regression analysis (simultaneous method) and one-way analysis of variance were used to analyze the data through SPSS software, version 16. Results: The dimensions of opportunity, support and resources have a positive and significant relationship with the patients' safety culture. However, the information dimension is not significantly related to the patients' safety culture. The results of multiple regression analysis showed that the dimensions of structural empowerment predict 59% of the variance of the patients' safety culture, and from among all dimensions of structural empowerment, opportunity and information in the model do not have a significant effect on the patients' safety culture. In addition, support and resources are the most important predictors of the criterion variables. The results of one-way analysis of variance showed that the score of safety culture among the midwives has the highest value, and the lowest value is attributed to the sitters. In other words, midwives pay more attention to the safety of patients and patients' safety culture. Conclusion: Structural empowerment is one of the factors affecting patients' safety culture which increases patients' safety. Focusing on structural empowerment improves patients' safety culture because when the staffs are structurally empowered, their accuracy and performance would improve, and they would provide more safe services to the patients. Therefore, hospital managers are advised to pay attention to the issue of structural empowerment in order to strengthen the patients' safety culture, and to provide the necessary training and equipment to improve the structural empowerment of their staffs, especially nurses.
Introduction: Assessing health, safety, and environment (HSE) performance based on up-to-date analytical models like resilience engineering, especially in automobile manufacturing companies, affected by the trilogy of HSE factors and functions, is of crucial importance. Therefore, this study was to review the factors effectively involved in HSE management performance assessment based on resilience engineering in automobile manufacturing industries. Material and Methods: To collect and classify the data, many relevant articles and procedures published in journals or presented at seminars were researched and cited. In this study, reliable online databases, including Google Scholar, Web of Science, Scopus, and PubMed were searched to meet this purpose. Other databases in Farsi such as Magiran, CIVILICA, and Scientific Information Database (SID) were also employed. Accordingly, a total number of 211 articles were extracted and filtered in terms of content and topic by a team of four HSE senior experts, whereby irrelevant studies were deleted, the full text of each relevant article was more closely considered, and finally 18 studies were selected and thoroughly examined. Results: The findings from these 18 articles revealed that the HSE would be influenced in various industries by factors such as organizational culture, learning and training, political-economic variables, workforce qualifications and skills, strategic and large-scale programs of organization plus its assets and financial resources. In automobile manufacturing industries as well, circumstances might emerge because of some extra-organizational threats and intra-organizational weaknesses, whereby the appearance of deficiencies in various processes and even the functions of the HSE as a whole would be impaired. Of the many external factors, one could mention economic sanctions, large-scale socioeconomic problems, and lack of materials and production equipment. The internal problems would also range from production reduction and cuts in budgets earmarked for different management departments to a rise in the number of accidents and diseases, soaring medical treatment costs, as well as growing expectations in employees, which together impact the HSE management performance. Conclusion: Regarding the studies conducted on various models presented so far in the area of resilience, it was concluded that the HSE performance of organizations intended to prevent and control risk factors were by no means distinct from other management factors and strategic decision-making in an organization. Rather, the HSE indicators could be impacted by many extra- and intra-organizational factors. Based on the models surveyed, it would be essential to consider the concept of resilience in HSE management. The reason for this is that the idea of the HSE would appear to be an issue of less virtue and importance in various stages and situations in the lifecycle of an organization, which is not consistent with the HSE management system and does not keep pace with the influencing factors.
Introduction: The main purpose of this study was to identify and evaluate environmental problems and their ranking and to determine the conceptual model of environmental impact assessment (EIA) in industrial parks. Accordingly. Material and Methods: In this study, environmental infrastructure issues were classified into five sections. The decision-making trial and evaluation laboratory (DEMATEL) technique was also employed to establish the relationships between the criteria. Moreover, the analytic network process (ANP) was utilized to determine their weight. Results: Examining the internal relationships between the variables correspondingly revealed that cultural and economic criteria were the most influential. On the other hand, the biological criterion was very effective. The ANP results also showed that the “low share of environmental investment” as an indicator was an economic criterion with a normal weight of 0.80, which was of utmost importance among the other defined cases. Conclusion: It was concluded that the definition of conceptual models in EIA processes can make it possible to examine and analyze the criteria and indicators affecting evaluation processes.