
Flying Ad Hoc Networks (FANETs) offer a unique way to connect aerial vehicles, but they come with their own set of challenges, especially when it comes to the routing process. The high node mobility, frequent topology changes, and UAVs’ limited energy resources make reliable communication difficult. Traditional ad hoc routing protocols like AODV and OLSR often struggle in these dynamic environments, resulting in frequent link failures, higher delays, and reduced network lifetime. This paper introduces a proactive airtime‐aware routing framework that integrates estimated remaining airtime (ERA) into the core functions of an OLSR‐based protocol, including neighbor discovery, multipoint relay (MPR) selection, and routing table computation. By embedding ERA within HELLO messages and leveraging it for intelligent energy‐aware route decisions, the proposed approach effectively avoids unstable or energy‐depleted UAVs, thereby minimizing link disruptions and enhancing route longevity. OMNeT++ simulation studies indicated that the airtime‐aware protocol outperformed state‐of‐the‐art protocols (OLSR, along with its extensions: SFA‐OLSR and GPSR‐assisted OLSR) by as much as 23% in packet delivery ratios (PDRs), 18% in throughput, and 27% in link reliability and also reduced end‐to‐end delays by up to 20% and increased the expected lifespan of the FANET by up to 22%. These results highlight the efficiency of integrating UAV airtime estimation into proactive routing, establishing a robust and energy‐efficient solution for next‐generation FANET deployments.
The synthesis of antenna array excitations from a desired radiation pattern presents a challenging inverse problem in electromagnetics. While deep learning offers a promising solution, existing approaches often employ a single network for the joint prediction of both amplitude and phase, which can be suboptimal. This paper introduces a novel dual-network deep learning framework that employs two separate and specialized networks to independently and simultaneously learn the mappings for amplitude and phase. This architecture allows a simpler network to be dedicated to the less complex amplitude profile, leading to faster convergence and a reduced computational load. To enhance robustness against heavy-tailed noise and prevent overfitting, the correntropy loss function is adopted instead of conventional MAE or MSE. Furthermore, a cosine annealing learning rate schedule is implemented to achieve superior and faster convergence compared to fixed, stepwise, and exponential decay schedules. The proposed model is rigorously evaluated through extensive Monte Carlo simulations (100 runs) to ensure statistical reliability. Simulation results for a linear array demonstrate that the proposed method provides a favorable trade-off between reconstruction accuracy and computational efficiency compared with conventional techniques. The separate network structure alone reduces training and test error by approximately 11%, while the correntropy loss yields a further 32% reduction in the radiation pattern reconstruction (RMSE) compared to MAE loss. This framework paves the way for highly accurate and real-time reconfigurable antenna systems.
This paper investigates simultaneous multiuser beamforming using two large, vertically oriented metasurfaces. A 2 & times; 21 & times; 21 prototype composed of 1-bit polarization-independent unit cells is designed, simulated, and experimentally evaluated at 3.7 GHz. Because the base station and users are located within the radiative near-field region of the large aperture, a distance-dependent spherical-wave model is employed instead of a single global Snell law phase gradient. Candidate phase-state combinations are screened to identify configurations capable of generating two simultaneous beams with a signal-to-interference ratio (SIR) above a 3-dB proof-of-concept threshold for the tested angular pairs. Eight phase-state configurations are experimentally evaluated for angular coverage, while detailed radiation patterns are reported for three representative configurations. The diode-based unit-cell response at 3.5 GHz is subsequently incorporated into a multiuser MIMO channel model for a larger 2 & times; 100 & times; 100 configuration. The metasurface states and base station precoding vectors are jointly optimized to maximize the minimum user signal-to-interference-plus-noise ratio (SINR) subject to a total transmit power constraint. Performance is evaluated for different numbers of users, user-cluster radii, and angles between the two metasurface sheets and is compared with that of a planar metasurface having the same number of elements. The proposed configuration is shown to provide an improved minimum SINR under the investigated scenarios.
Reliable wireless communication is crucial for the safe operation of high-speed trains, which is based on stable radio wave coverage in complex environments. The space along the railway can be categorized into three types: open space, confined space, and open-confined mixed space. Predicting radio wave coverage in these environments is essential for designing reliable wireless communication systems for vehicles. This study focuses on the multitunnel connection environment along the railway, which falls into the category of open-confined mixed space. Unlike conventional tunnel or open-space environments, the propagation characteristics in such scenarios are more complex and influenced by multiple factors. Therefore, it is important to investigate the radio wave propagation characteristics in a multitunnel connection environment along a railway. By employing the parallel finite difference time domain (FDTD) technology, the influences of important factors such as antenna position, tunnel cross-sectional shape, beam angle, and open-space distance on radio wave coverage are analyzed, and the underlying mechanism is revealed. Simulation results show that the radio wave coverage is highly sensitive to the beam angle of the transmitting antenna, and the variation law of radio wave coverage with beam angle is related to the position of the transmitting antenna and tunnel cross-sectional shape. Furthermore, the impact of trains on link reliability is quantitatively studied. These studies can provide concrete guidelines for antenna deployment optimization in railway vehicular communication systems.
For integrated sensing-communication and digital electromagnetic-twin applications, this study investigates a comprehensive monostatic sensing channel model. The model includes target back-scattering echoes and dynamic and static back-scattering clutter, as well as multipath components generated by both the target and surrounding environmental objects. Unlike communication links, which must consider more surfaces and interaction mechanisms of all environmental objects reached by electromagnetic waves, monostatic sensing waves interact only with the surfaces of objects within the radar’s line of sight. To support monostatic sensing channel simulation, this study proposes an environment-driven ray-launching method. The method computes only those ray tubes emitted from the sensing radar that possess an effective illumination cross section. A novel triangular-tile subdivision scheme is introduced to discretize the illumination cross section of each ray tube, ensuring that every tile meets the sensing-resolution requirement. The ray-path determination and path-loss calculations are well suited for GPU acceleration, enabling substantial reductions in computation time. Measurements were conducted in an urban campus environment, and building-induced clutter was simulated using the proposed method. The simulation results show strong agreement with the measurements in terms of dominant echo components, while the delay-spread error remains within a small range.