
The Routing and Wavelength Assignment (RWA) is a fundamental challenge in wavelength-routed all-optical networks, directly impacting network cost, resource utilization, and blocking probability. For a given network topology, RWA seeks to identify optimal lightpaths and assign wavelengths such that no two connections sharing a link use the same wavelength. Due to its NP-complete nature, exact solutions are impractical for large-scale networks, motivating the use of metaheuristic approaches. This work proposes a Genetic Algorithm (GA) based RWA solution incorporating node-connectivity-aware crossover and mutation strategies. A novel tournament selection method is introduced, combining tournament scores with the fitness function to achieve an effective balance between exploration and exploitation. The objective function simultaneously minimizes wavelength usage and the number of hops per lightpath, thereby reducing overall blocking probability. Simulation results demonstrate that the proposed GA approach outperforms conventional GA methods, achieving improved resource efficiency and reduced blocking in diverse network scenarios.
Medical image watermarking has gained significant attention in recent years as a critical tool for data security. Given that even minor distortions can compromise diagnostic accuracy and lead to misinterpretation, reversibility is paramount in medical imagery. This research introduces a sophisticated hybrid reversible watermarking architecture operating within the frequency domain. By leveraging the combined strengths of Discrete Wavelet Transform (DWT), Discrete Cosine Transform (DCT), and Singular Value Decomposition (SVD), the system achieves an optimal balance between payload capacity, imperceptibility, and robustness. The proposed method generates the watermark directly from the host image's own features to enable self-embedding, ensuring highly accurate blind tamper detection and integrity verification without requiring the original image. To address security and authentication concerns, a dual watermarking strategy is implemented. A reversible watermark (W1), generated through the RLSB method, is embedded into the LL coefficients to preserve diagnostic integrity, while a secondary biometric logo (W2) is integrated into the HH coefficients to facilitate authentication and confidentiality. Experimental results demonstrate high robustness against common signal processing attacks, while comparative analysis using AI-driven classification features confirms the superior performance of the proposed approach over existing methods.
The rapid growth of Internet of Things (IoT) applications has intensified the demand for energy-efficient and low-latency data processing, exposing the limitations of conventional cloud-based architectures that rely on centralized resources. Fog computing addresses this challenge by distributing processing closer to end users. However, limited attention has been given to the impact of heterogeneous fog server capacities across multiple network layers on task allocation and energy consumption. This paper investigates the effects of heterogeneous fog servers on allocation efficiency and network energy performance. Three fog server categories with different processing capacities (34.2k MIPS, 73.44k MIPS, and 1080k MIPS) are evaluated using a Mixed Integer Linear Programming (MILP) model under both limited and unlimited deployment scenarios. The results demonstrate that the fog-based approach significantly reduces total energy consumption by up to 89.6% compared to the conventional cloud-based approach. Moreover, the findings reveal that higher processing server capacity plays a more critical role in improving energy efficiency than server heterogeneity alone, as greater capacity enables demand consolidation and reduces the number of active servers. These insights provide valuable guidance for the energy-efficient design of heterogeneous fog computing infrastructures.
A compact multi-input multi-output (MIMO) antenna for sub-6 GHz 5G communication is proposed in this article. The proposed antenna consists of a plus-shaped slot with a microstrip feed line positioned inside a rectangular patch after etching a circular slot. The antenna elements are placed oppositely with an edge-to-edge spacing of only 4 mm. To reduce mutual coupling, a hybrid isolation technique consisting of two pairs of vertical and horizontal neutralization lines (NLs) combined with a defected ground structure (DGS) is employed. The proposed technique reduces the mutual coupling below −26 dB in the worst case scenario and achieves a peak isolation of −35 dB over the operating frequency band from 5.17 to 5.47 GHz. The combination of different isolation techniques improves coupling reduction efficiency without increasing the antenna size or inter-element spacing. The final results show an isolation improvement of approximately 14 dB compared to the reference design. The proposed MIMO antenna has compact dimensions of 31 × 31 × 1.6 mm³ and is printed on a low-cost FR-4 substrate. Fabrication and measurement processes were carried out, and the measured results show good agreement with the simulated results. Other antenna performance parameters, including envelope correlation coefficient (ECC), radiation efficiency, and gain, were also investigated. The obtained results demonstrate that the proposed antenna is a suitable candidate for modern sub-6 GHz 5G communication devices.
A compact Ultra-WideBand (UWB) microstrip antenna is realized on RT/Duroid 5880 with overall dimensions of 17 × 19 × 0.7 mm³. The slot patch configuration achieves continuous impedance matching from 3.9 to 17.54 GHz, resulting in a −10 dB bandwidth of 13.62 GHz. The three dominant resonant modes are at 3.91 GHz, 10.24 GHz and 16.66 GHz with a strong notch at 9.13 GHz (|𝑺𝟏𝟏| ≈−56 dB). The realized gain of the antenna from 2.5 to 3.51 dBi across the operating frequency band provides an acceptable performance for use in high-speed, short distance wireless links. Analyses performed in both time and frequency domains have established the UWB properties of the slot patch antenna as demonstrating low group delay variability, well-contained impulse responses and clearly defined eye diagrams. When compared with previously reported designs, the proposed antenna offers a favorable balance between miniaturization, bandwidth, and low-loss performance, making it suitable for UWB, GPR, wireless communication, and radar applications within compact and multi-standard platforms.