
A priori geologic and geophysical information has been used to construc conceptual VLF experiments on conductively and inductively coupled overburden geological models of the lead-zinc (Pb-Zn) mineralization zone found in southeastern Nigeria.This is based on the finite element approach to (1) simulate different geologic situations of overburden occurrence, (2) examine the roles played by overburden in modifying and masking VLF responses of a buried conductor target, and (3) confirm the effectiveness of VLF method in mapping lead-zinc lodes found in sedimentary terrains.The computed theoretical model curves and field examples are expected to serve as guide for VLF anomaly pattern recognition due to overburden thickness, resistivity and width of conductor in similar terrain as the study area.
In this study, methods based on the distribution model (with and without personal opinion) were used for the separation of anomalous zones, which include two different methods of U-spatial statistics and mean plus values of standard deviation (). The primary purpose is to compare the results of these methods with each other. To increase the accuracy of comparison, regional geochemical data were used where occurrences and mineralization zones of epithermal gold have been introduced. The study area is part of the Hashtjin geological map, which is structurally part of the folded and thrust belt and part of the Alborz Tertiary magmatic complex. Samples were taken from secondary lithogeochemical environments. Au element data concerning epithermal gold reserves were used to investigate the efficacy of these two methods. In the U- spatial statistics method, and criteria were used to determine the threshold, and in the method, the element enrichment index of the region rock units was obtained with grouping these units. The anomalous areas were identified by, and criteria. Comparison of methods was made considering the position of discovered occurrences and the occurrences obtained from these methods, the flexibility of the methods in separating the anomalous zones, and the two-dimensional spatial correlation of the three elements As, Pb, and Ag with Au element. The ability of two methods to identify potential areas is acceptable. Among these methods, it seems the method with criteria has a high degree of flexibility in separating anomalous regions in the case of epithermal type gold deposits.
The quality of any hydrocarbon-bearing reservoir is vital for a successful exploitation work.. The reservoir quality is a function of its petrophysical parameters. Hence the need to model these properties geostatistically in order to determine the quality away from well locations.Composite logs for four wells and 3-D seismic data were used for the analysis. A reservoir named Sand X was mapped and correlated across wells 1 through 4. The four reservoir quality indicators - Effective porosity, permeability, volume of shale and net-to-gross- were estimated and modelled across the field. Sequential Gaussian simulation algorithm was employed to distribute these properties stochastically away from well locations and five realizations were generated. The volume of shale varied from 0.025 (Well 1, second realization) to 0.18(Well 2, first realization). The net-to-gross varied from 0.81 to 0.96 in wells 3 and 4 respectively, for the third realization, while the effective porosity varied from 0.125 to 0.295 for the fifth realization in Wells 3 and 4 respectively. The permeability is above 5000mD at all the existing well locations.These realizations were ranked using Lp norm statistical tool to pick the best for further evaluation. The reservoir quality deduced from the analyzed indicators was favourably high across the reservoir.The application of geostatistics has laterally enhanced the log data resolution away from established well locations.
This paper presents the results of petrographic study of sedimentary iron ore from surface strata of the Shendi-Atbara Basin, River Nile State, Sudan. The aims of this study are to investigate the geological behavior and geological conditions affecting precipitation of sedimentary iron ore. The methodologies have been used to realize the objectives of this study include field work, office work and laboratory work including thin sections and polished sections analysis. According to field observation sedimentary iron ore can broadly be considered as occurring in three major classes:Ferribands iron, ferricrete iron and oolitic iron ores. The modes of occurrence of iron ore were described at the outcrops and vertical sedimentary profiles revealed that the iron occurred in the study area at different types in stratigraphic sequence such as cap, bedded and interbedded conformable with Shendi Formation. Petrographic study of iron ore in collected samples using polarized microscope and ore microscope includes study of the textures and structures of ores to obtain ore history. The main types of textures and structures in studied samples are oolitic, granular, lamellar and bands.According to these results the origin of iron ore is formed by chemical precipitation during chemical weathering of surrounding areas in continental lacustrine environment. The iron ore in study area is potential for future mining works and steel industry
This groundwater research is carried out groundwater quality in Jabal Sarage and Charikar Districts. The main objective of this research is to find out natural causes of drinking water contaminations (toxic elements and components), that are leaching from soluble arrangement of rocks,sediments and soil by surface water at the infiltration time, toward the groundwater. For completion this research I used two categories of water analysis; one is areal analysis, and another is laboratory analysis. In areal analysis ten wells have been recovered by this research in Jabal Sarage and Charikar Distracts, a number of Electro-Conductivity, water temperature,dissolved oxygen in water, Total Dissolved Soled (TDS) and the Resolved Salt in Water (SSW), determination Partible ground at areal complete. For laboratory works I used chemical device of Spectra- photo model. From comparing mean of chemical and physical parameters with standards.pH, K, Na, Mg, Cl, Fe, F, TH, Ca and SO4 all are normal and we can use them for drinking and irrigation waters. The challenges that I faced during this research are; absence of research in this area and lack of geological equipment’s.