
Improving the power generation performance of reverse electrodialysis (RED) requires both a high open-circuit voltage (VOC) and low internal resistance (Rint). In this study, a profiled ion-exchange membrane (PF membrane) with a profile height of 90 μm, a profile spacing of 2.0 mm and an inclination angle of 9° was fabricated and applied to a RED stack with an intermembrane distance of 180 μm. The performance of the modified PF membrane was evaluated and compared with that of a flat membrane with an intermembrane distance of 180 μm and a previously reported PF membrane with an intermembrane distance of 380 μm. Although the modified PF membrane exhibited a slightly lower VOC than the flat membrane, it showed a substantial reduction in Rint. In addition, increasing the profile spacing suppressed the increase in pressure loss associated with the shortened intermembrane distance, enabling a high net power density to be maintained. These results demonstrate that the modified PF membrane mitigates the reduction in VOC observed for the previously reported PF membrane while further reducing Rint. Consequently, the maximum net power density corrected for electrode resistance increased from 1.0 to 2.0 W m−2. Furthermore, when both the electrode resistance and pressure losses associated with components outside the RED stack were excluded from the calculation, the maximum net power density increased from 1.4 to 2.1 W m−2. Thus, improving the balance between VOC and Rint is an effective strategy for enhancing RED performance.
Solvent-tolerant nanofiltration (STNF) provides an energy-efficient approach for the separation and recovery of solutes from industrial water–solvent streams. This study investigates atmospheric-pressure molecular layer deposition (AP-MLD) for the fabrication of thermally stable titanium-hybrid (Ti-hybrid) ceramic membranes for STNF. Ti-hybrid layers were deposited on tubular porous ceramic supports at 125 °C using 900 AP-MLD cycles and subsequently annealed in air at 350 °C for 4 or 8 h. Microstructural analysis showed uniform Ti distribution throughout the modified membrane layer, while Fourier-transform infrared spectroscopy indicated no significant changes in the characteristic Ti- and C-related functional groups following exposure to water–solvent mixtures. Membrane stability was evaluated, for 24h of total exposure, by measuring demineralized water permeance before and after exposure to 9:1 (v/v) water–dimethyl sulfoxide (DMSO), water–2-propanol (IPA), and water–N,N-dimethylformamide (DMF) mixtures at 25 and 60 °C. The membranes exhibited pore diameters <2 nm, >90% rejection of polyethylene glycol with molecular weights >420 Da, and a water permeance of 21 ± 2 L·m⁻²·h⁻¹·bar⁻¹. Stable performance was maintained during exposure to the investigated water–solvent mixtures, with permeances of 20–28 L·m⁻²·h⁻¹·bar⁻¹ at 60 °C. While the 4 h annealed membrane showed changes following exposure to water–DMF at elevated temperature, extending the annealing time to 8 h improved the stability of the Ti-hybrid network. These results demonstrate that AP-MLD-derived Ti-hybrid layers provide a promising route toward high-permeance, thermally stable ceramic membranes for STNF applications.
Glassy polymer membranes offer an energy-efficient platform for gas separation, where performance is governed by gas transport dynamics across the polymer microstructure. Understanding these transport mechanisms at the molecular level is therefore essential for rational membrane design, with molecular dynamics (MD) simulations serving as a direct tool to resolve them. This review first summarizes MD simulation approaches for studying gas transport in glassy polymer membranes, from atomistic membrane construction and equilibration to equilibrium and non-equilibrium simulations. We then investigate the molecular mechanisms governing gas transport in glassy polymers through molecular simulations. Molecular trajectories, spatial gas distributions, and size-dependent permeability indicate that gas transport occurs predominantly through persistent pore-mediated pathways. Depending on pore structure and gas properties, pore-mediated transport is further classified into elementary mechanisms, including surface diffusion, Knudsen diffusion, and viscous flow, as well as distinct transport behaviors such as hopping diffusion, dynamic-pore-mediated transport, and molecular sieving. Characteristic molecular observables obtained from MD simulations are then identified to distinguish among these transport regimes. Finally, we discuss key challenges in improving the accuracy and reliability of MD simulations and highlight the need for predictive frameworks linking molecular-scale pore structure and gas properties to macroscopic gas transport.
The increasing demand for sustainable separation technologies has intensified interest in polymeric membranes due to their energy efficiency and versatility. However, many conventional membranes are fabricated from permanently crosslinked or non-degradable polymers, limiting their recyclability and contributing to environmental waste. In this review, the integration of dynamic bonds into membrane materials is explored, focusing on their potential to enable reprocessability, repairability and recyclability. First, a concise background summarizing the most essential aspects of membrane science is presented. Next, dynamic bonding strategies commonly employed in polymer science are introduced, highlighting the promise in applying such chemistries specifically to membrane fabrication. Then, literature examples of membranes incorporating those dynamic bonds are evaluated for their impact on membrane properties and recyclability potential. On one hand, physical/non-covalent/ supramolecular interactions are examined, including van der Waals interactions, π-π stacking, hydrogen bonding, ionic bonding and metal-ligand coordination. On the other hand, at the core of the review, the more stable and less environmentally sensitive dynamic covalent bonds (DCBs) are discussed. Both well-explored Diels-Alder (DA) chemistry and other mechanisms e.g. imine exchange, transesterification, and disulfide bonds are discussed. Lastly, challenges of dynamic networks related to a balance between stability and reversibility are discussed, in membrane-relevant conditions: water, extreme pH, organic solvents, high temperature and pressure. This review aims to serve as a foundation for future research into sustainable recyclable membrane technologies driven by dynamic polymer design.
Sterile filtration of lipid nanoparticles (LNPs) operates at membrane pore sizes comparable to particle dimensions, resulting in non-classical fouling behavior. However, existing sterile filtration studies rely primarily on bulk characterization methods such as dynamic light scattering (DLS), which cannot resolve transmission of individual LNP subpopulations. Here, we combine controlled constant-flux sterile filtration with asymmetric flow field-flow fractionation coupled to diode-array detection and multi-angle light scattering (AF4-DAD-MALS) to quantify, to our knowledge for the first time, population-specific transmission of LNPs during 0.1µm pore-sized sterile filtration while simultaneously monitoring TMP evolution. Segmented Hermia analysis indicated an initial intermediate blocking regime followed by cake-filtration-like behavior. While DLS indicated preferential depletion of larger LNPs in the permeate, AF4 resolved three LNP populations in the feed and quantified their population-specific transmission, with the largest population showing lower transmission than the small and medium populations.The presented workflow facilitates population-resolved quantification of LNP transmission during sterile filtration and provides a framework to relate particle heterogeneity to hydraulic filtration behavior. This enables future mechanistic investigations of particle transport across membranes and filtration processes beyond conventional bulk characterization.