Previous authors have suggested that Titan’s individual sand particles form by either sintering or by lithification and erosion. We suggest two new mechanisms for the production of Titan’s organic sand particles that would occur within bodies of liquid: flocculation and evaporitic precipitation. Such production mechanisms would suggest discrete sand sources in dry lakebeds. We search for such sources, but find no convincing candidates with the present Cassini Visual and Infrared Mapping Spectrometer coverage. As a result we propose that Titan’s equatorial dunes may represent a single, global sand sea with west-to-east transport providing sources and sinks for sand in each interconnected basin. The sand might then be transported around Xanadu by fast-moving Barchan dune chains and/or fluvial transport in transient riverbeds. A river at the Xanadu/Shangri-La border could explain the sharp edge of the sand sea there, much like the Kuiseb River stops the Namib Sand Sea in southwest Africa on Earth. Future missions could use the composition of Titan’s sands to constrain the global hydrocarbon cycle.
The tidal evolution of the Earth-Moon system is reexamined. Several models of tidal friction are first compared in an averaged Hamiltonian formulation of the dynamics. With one of these models, full integrations of the tidally evolving Earth-Moon system are carried out in the complete, fully interacting, and chaotically evolving planetary system. Classic results on the history of the lunar orbit are confirmed by our more general model. A detailed history of the obliquity of the Earth which takes into account the evolving lunar orbit is presented.
Tides induce a semimajor axis rate of +38.08 ± 0.19 mm/yr, corresponding to an acceleration of the Moon’s orbital mean longitude of −25.82 ± 0.13 "/cent2, as determined by the analysis of 43 yr of Lunar Laser Ranging (LLR) data. The LLR result is consistent with analyses made with different data spans, different analysis techniques, analysis of optical observations, and independent knowledge of tides. Plate motions change ocean shapes, and geological evidence and model calculations indicate lower rates of tidal evolution for extended past intervals. Earth rotation has long-term slowing due to tidal dissipation, but it also experiences variations for times up to about 105 yr due to changes in the moment of inertia. An analysis of LLR data also tests for any rate of change in either the speed of light c or apparent mean distance. The result is (−2.8 ± 3.4)×10–12 /yr for either scale rate or –(dc/dt)/c, or equivalently −1.0 ± 1.3 mm/yr for apparent distance rate. The lunar range does not reveal any change in the speed of light.
Cassini/VIMS high-phase specular observations of Titan's north pole during the T85 flyby show evidence for isolated patches of rough liquid surface within the boundaries of the sea Punga Mare. The roughness shows typical slopes of 6°±1°. These rough areas could be either wet mudflats or a wavy sea. Because of their large areal extent, patchy geographic distribution, and uniform appearance at low phase, we prefer a waves interpretation. Applying theoretical wave calculations based on Titan conditions our slope determination allows us to infer winds of 0.76±0.09 m/s and significant wave heights of [Formula: see text] cm at the time and locations of the observation. If correct, these would represent the first waves seen on Titan's seas, and also the first extraterrestrial sea-surface waves in general.
Thermal analysis instruments have been used on Mars by the Viking, Phoenix, and MSL missions. These instruments can be very useful in identifying volatile-bearing minerals such as carbonates, sulfates, or phyllosilicates down to very low abundances. Mineral identification is done by comparing thermal decomposition behavior of samples with known mineralogy to samples with unknown mineralogy. However, thermal decomposition behavior can change with instrument conditions such as pressure and sample properties such as particle size. The Mars instruments flown to date have used much lower pressures and flow rates than traditional laboratory experiments. The objective of this work was to investigate whether an analytical model based on equilibrium thermodynamics can accurately predict changes in decomposition temperature in instruments operating under lower pressure/flow conditions. We find that while the model predicts the general trend that decomposition temperature drops with decreasing pressure, the difference between modeled and measured temperatures can be on the order of 100°C for carbonates and sulfates. These differences can be explained by factors such as sample particle size, carrier gas species, gas flow rate, and oven volume. A calcium carbonate sample shows how particle size can change decomposition temperature by almost 200°C (decomposition temperatures decrease with decreasing particle size) and that carrier gas species, flow rate, and instrument geometry can affect decomposition temperatures by 20-50°C. These results demonstrate that predicting changes in decomposition temperature based on a thermodynamic or empirical model is not sufficient and that samples must be run under instrument conditions relevant to the instrument that produced the data on Mars. Furthermore, the effects of particle size, carrier gas species and flow rate, as well as instrument geometry must be taken into account in order to compare Mars data to samples run in terrestrial labs. This work shows the magnitude of these factors, demonstrating why they must be taken into account, providing a framework for how to correctly interpret thermal analysis data from Mars.
Observations from Cassini VIMS and ISS show localized but extensive surface brightenings in the wake of the 2010 September cloudburst. Four separate areas, all at similar latitude, show similar changes: Yalaing Terra, Hetpet Regio, Concordia Regio, and Adiri. Our analysis shows a general pattern to the time-sequence of surface changes: after the cloudburst the areas darken for months, then brighten for a year before reverting to their original spectrum. From the rapid reversion timescale we infer that the process driving the brightening owes to a fine-grained solidified surface layer. The specific chemical composition of such solid layer remains unknown. Evaporative cooling of wetted terrain may play a role in the generation of the layer, or it may result from a physical grain-sorting process.
We present an automated microscopy system for the optical characterization of meteorite thin sections. The system employs focus-stacking and high-dynamic range imaging to facilitate high-contrast and unpolished samples. Images are acquired at ∼385 nm/pixel and automatically stitched together to create a billion-pixel image for a typical ∼1 cm2 thin section. This image can be viewed in a web browser (with smooth panning and zooming) using a free browser plugin. The software we created to acquire and assemble these images is made freely available for others to create a similar system. Large optical digital images of meteorite sections make it possible to collaboratively inspect and characterize the sample by using the web browser interface as a “virtual microscope”. The system can be employed on any optical microscope with a computerized stage and consumer-grade digital camera, and can be used in a wide range of applications.
Studies of the Moon, with thanks to NASA and Johnson Space Center, have quantified an anomaly in measurements of lunar orbital evolution. This finding may have significance for cosmology and the speed of light. The Lunar Laser Ranging Experiment from Apollo reports the Moon’s semimajor axis increasing at a rate of 3.82 ± .07 cm/yr, anomalously high.
Sublimation experiments have been carried out to determine the effect of the mineral dust content of porous ices on the isotopic composition of the sublimate gas over medium (days to weeks) timescales. Whenever mineral dust of any kind was present, the D/H ratio of the sublimated gas was seen to decrease with time from the bulk ratio. Fractionations of up to 2.5 were observed for dust mixing ratios of 9 wt% and higher of JSC MARS-1 regolith simulant 1-10 μm crushed and sieved fraction. These favored the presence of the light isotope, H2O, in the gas phase. The more dust was added to the mixture, the more pronounced was this effect. Theoretical modeling of gas migration within the porous samples and adsorption on the excavated dust grains was undertaken to explain the results. Adsorption onto the dust grains is able to explain the low D/H ratios in the sublimate gas if adsorption favors retention of HDO over H2O. This leads to significant isotopic enrichment of HDO on the dust over time and depletion in the amount of HDO escaping the system as sublimate gas. This effect is significant for planetary bodies on which water moves mainly through the gas phase and a significant surface reservoir of dust may be found, such as on Comets and Mars. For each of these, inferences about the bulk water D/H ratio as inferred from gas phase measurements needs to be reassessed in light of the volatile cycling history of each body.
Many solid bodies in the outer Solar System are covered with ices of various compositions, including water, carbon dioxide, methane, nitrogen, and other molecules that are solid at the low temperatures that prevail there. These ices have all been detected by remote sensing observations made with telescopes on Earth, or more recently, spacecraft in orbit (notably Galileo at Jupiter). The data also reveal other solid materials that could be minerals or complex carbon-bearing organic molecules. A study in progress using large ground-based telescopes to acquire infrared spectroscopic data, and laboratory results on the optical properties of complex organic matter, seeks to identify the non-icy materials on several satellites of Saturn, Uranus, and Neptune. The work on the satellites of Saturn is in part preparatory to the Cassini spacecraft investigation of the Saturn system, which will begin in 2004 and extend for four years.
