
With the acceleration of agricultural modernization, the demand for intelligent and precise agricultural production has been continuously increasing. In the hilly and mountainous areas of China, due to geographical constraints and diverse planting patterns, small and micro agricultural machinery are more suitable for field operations. However, the research and development of small and micro unmanned agricultural machinery dedicated to hilly and mountainous areas started relatively late with a weak foundation. Furthermore, constrained by the limited body size of such machinery, the well-established high-precision positioning equipment designed for medium and large unmanned agricultural machinery can hardly be adapted to them. Therefore, in order to improve the operation accuracy of the navigation system for small and micro unmanned agricultural machinery in hilly and mountainous areas under complex environments and working conditions, this study proposed a variable-structure single-antenna BDS/INS/OD integrated positioning system. During the availability of BDS, the non-holonomic constraint (NHC) was incorporated into the Sage-Husa adaptive filter-based BDS/INS/OD system to construct a complete velocity constraint. This not only suppressed the velocity error that tended to diverge due to the severe vibration of agricultural machinery, but also enhanced the efficiency and accuracy of position measurement noise estimation. During BDS outages, the position measurement was disabled and the system was switched to the INS/OD system. The strong tracking filter was adopted to reduce the impact of abnormal velocity observation information, achieving high-precision seamless navigation. In addition, based on the differences in positioning noise characteristics between the two navigation modes, first-order and third-order Savitzky-Golay (S-G) low-pass filters based on a sliding window were designed respectively to smooth the navigation waypoints, which improved the accuracy of heading angle estimation using historical positioning information when the agricultural machinery operated at low speeds. The sliding window length of the smoothing filter was correlated with the traveling speed of the agricultural machinery: a short distance caused the heading angle estimation to be overly sensitive and resulted in large fluctuations, while an excessively long distance made the estimation more susceptible to historical paths and reduced real-time performance. In this paper, the distance between the latest positioning point and the farthest positioning point was set within the range of 1.5u20132.0 m. Meanwhile, to avoid overshoot of the adaptive filter, the boundaries of the noise variance matrix and the posteriori estimation covariance were constrained. An integrated system was built using a self-developed small agricultural machinery as the platform, and vehicle-mounted field experiments were conducted. The experimental site was selected as an open area with low susceptibility to interference, and the traveling speed of the agricultural machinery was approximately 0.38 m/s. The results showed that: during the normal and stable operation of BDS, the mean, root mean square (RMS), and maximum value of the horizontal distance error of the standalone BDS were 0.018 m, 0.01 m, and 0.045 m, respectively; the mean, RMS, and maximum value of the horizontal distance error of the BDS/INS/OD system were 0.007 m, 0.007 m, and 0.063 m, respectively, and the maximum error occurred during the severe oscillation caused by emergency braking. During three 60-second BDS outages periods, the mean, RMS, and maximum value of the error of the INS/OD system were 0.051 m, 0.022 m, and 0.134 m, respectively. To simulate the BDS interference condition, preset random errors following a zero-mean normal distribution with an RMS of 1 m were artificially injected into the BDS positioning results along the north, east and up directions during three 60-second periods. When the BDS positioning error increased under simulated interference, the mean, RMS, and maximum value of the error of the BDS/INS/OD system were approximately 0.075 m, 0.039 m, and 0.166 m, respectively; additionally, there was no divergence trend in the velocity and attitude angle errors, and the latter could be used to compensate for positioning deviations caused by the inclination of the agricultural machinery. This study demonstrates that the single-antenna BDS/INS/OD integrated navigation system, which organically combines adaptive filtering and motion constraint principles, exhibits high stability under complex working conditions. It not only meets the operation accuracy requirements of unmanned agricultural machinery in hilly and mountainous areas, but also possesses strong adaptability and anti-interference performance. The findings also provide an important reference for the research and development of positioning systems for other outdoor vehicles operating under complex working conditions and environments.
Biogas slurry can be applied to straw return in sustainable agriculture. In this study, full straw return with biogas slurry was used to reduce chemical fertilizer for high soil fertility. A field experiment was conducted in riceu2013wheat (W) and riceu2013rapeseed (R) rotation systems. Two factors were designed: straw return amount (half return or full return) and fertilizer type (full chemical fertilizer or biogas slurry substitution with chemical fertilizer reduction). Four treatments were established: T1 (half straw return + full chemical fertilizer), T2 (full straw return + full chemical fertilizer), T3 (half straw return + 50% chemical fertilizer + biogas slurry), and T4 (full straw return + 50% chemical fertilizer + biogas slurry). A comparison was made of crop yield, yield components, soil aggregate stability, straw decomposition rate, and soil nutrient contents after the four treatments. The results demonstrated that biogas slurry was the key factor in substantially reducing chemical fertilizer while maintaining stable crop yields under full straw return. The wheat and rapeseed yields showed no significant difference under a 50% chemical fertilizer reduction with full straw return and biogas slurry (W-T4 for wheat rotation, and R-T4 for rapeseed rotation), compared with the control treatment (W-T1/R-T1), which received half straw return and full chemical fertilizer. Notably, the highest wheat yield of 8162.3 kg/hmu00B2 was recorded in W-T4 treatments. Biogas slurry alleviated the initial growth inhibition of crops caused by full straw return and improved yield components. In wheat, the spike length significantly increased by 17.4% under W-T4 (10.8 cm), compared with W-T3 (9.2 cm). In rapeseed, the thousand kernel weight was reduced significantly in R-T4 treatment, whereas the number of pods per plant increased. Specifically, pods per plant reached 360.7 in R-T4, which was 33.5% higher than that in R-T3. The combined application of biogas slurry and straw return rapidly improved soil structure, superior to that of straw return alone. W-T4 and R-T4 treatments significantly increased the proportion of macro aggregates larger than 2 mm in diameter, as well as the mean weight diameter (MWD) of soil aggregates. The MWD was 32.0% higher under W-T4 than that under W-T3, indicating the substantial improvement in soil physical stability and resistance to erosion. Furthermore, the integrated practice simultaneously elevated overall soil fertility, although biogas slurry application failed to significantly promote the decomposition rate of rice straw (i.e., no acceleration effect was observed compared with straw return alone). Soils under the W-T4 treatment exhibited significantly higher contents of total nitrogen, alkali hydrolyzable nitrogen, and available phosphorus, compared with the original soil before the experiment. These nutrient improvements indicated that biogas slurry contributed short term nutrient supply and longer term soil fertility. In summary, the full straw return with biogas slurry reduced chemical fertilizer use by 50% with high crop yield, simultaneously improving soil structure and nutrient status. Multiple synergistic mechanisms also included nutrient supplementation from biogas slurry, physiological compensation for early season growth suppression caused by straw incorporation, and physical amelioration of soil aggregation. The finding can provide promising technical support for green agricultural production, thus contributing to both chemical input reduction and soil quality enhancement in rice rotation systems.
Regional resource allocation is often required to implement the strategy of u201Cstoring grain in the landu201D for national food security. This study aims to explore spatiotemporal evolution and driving mechanisms of high-standard farmland construction in the Yellow River Basin. Panel data were then collected from 60 prefecture-level cities from 2010 to 2023. An evaluation index system was constructed from five dimensions: infrastructure support, resource utilization, disaster prevention and mitigation capacity, economic benefits, and social benefits. Entropy-weighted TOPSIS was employed to determine the yearly construction indexes for each city. Dagum Gini coefficient was used to identify the primary sources of intra- and inter-regional disparities and their evolution trends. Moranu2019s I index was utilized to test spatial correlation. Geographical Detector Model was applied to assess the explanatory power of each factoru2014from economic, social, and ecological dimensionsu2014on the spatial differentiation of construction. Additionally, their interactions were analyzed to identify cumulative or nonlinear enhancement among factors. The results indicate that the construction of high-standard farmland shared a trend of improvement in the entire basin. A stepped gradient pattern was characterized by upstream lagging, the middle reaches in the middle, and the downstream leading; the Gini coefficient showed a continuous downward trend over the entire basin, where interregional disparities were the primary source of the variation, although their contribution decreased gradually; There was significant positive spatial autocorrelation in high-standard farmland construction over prefecture-level cities. The patterns with the high levels were concentrated in the lower reaches, while those with low levels were distributed in ecologically fragile areas of the upper reaches. In terms of driving factors, the explanatory power of spatial differentiation was ranked in the descending order of the economic u0026gt; social u0026gt; ecological factors in high-standard farmland construction. Among them, the level of fiscal investment was the dominant driving variable in land use differentiation. Although ecological factors had limited explanatory power, there was significant two-factor enhancement when interacting with economic and social factors. Ecological constraints were primarily utilized to moderate the conversion efficiency of economic and social investments. The driving mechanism behind spatiotemporal evolution was synergistically dominated by economic and social factors, with breakthroughs achieved by ecological factors under constraints. Differentiated roles of these various driving forces provided empirical evidence to implement region- and category-specific decision-making on high-standard farmland construction. Therefore, a gradient collaboration mechanism was established to narrow spatial disparities among the upper, middle, and lower reaches; Digital technology is expected for accurate, area-specific control; Ecological-economic synergy is also suitable for the various ecological constraints over the basin; The findings can provide a strong reference for long-term maintenance to realize high-standard farmland construction.
Precise flow measurement and control is often required in the terminal canal networks of irrigation districts. This study aims to examine the hydraulic performance of integrated measurement and control agricultural sluice gate at the trapezoidal channel diversion outlet. Geometric and field frameworks were also established for such sluices. Experimental measurements and numerical simulations were conducted to determine the influencing factors on the water surface profile upstream and downstream of the regulating sluice, the variation of Froude number Fr, the diversion ratio R, and the discharge coefficient u03BC1 of the agricultural diversion sluice under different sluice openings e1 and e2. Steady-state flow was modeled using volume of fluid (VOF). Four grid resolutions were evaluated for grid independence verification. The governing equations included the transport, continuity, Reynolds-averaged, turbulent kinetic energy and dissipation rate equations. The equation system was discretized by the finite volume method, according to the segregated implicit iterative approach. The channel dimensions and boundary were matched with the experimental setup. Four evaluation metrics were selected to verify the simulation accuracy: the maximum absolute relative error (MARE), mean absolute percentage error (MAPE), coefficient of determination (R2), and root mean square error (RMSE). Dimensional analysis with dimensional homogeneity was employed to derive the overflow formula for agricultural sluices. Grid independence analysis demonstrated that the grid was refined to 1.5 cm or finer, indicating the negligible variation in water depth at the monitoring point. Grid quality exceeded 0.8 for all four resolutions, indicating the accurate grid generation and reliable simulation. Experimental data were validated by the maximum absolute relative errors of 9.96% and 7.08%, respectively, for flow rate through the sluice and water depth h1 in front of sluice. The mean absolute percentage errors were 3.91% and 1.64%, respectively. Coefficients of determination reached 0.986 and 0.985, respectively. Root mean square errors were 1.14 and 0.45, respectively. Water surface fluctuation upstream of the agricultural sluice gate decreased, as the sluice opening was reduced. The upstream Froude number remained below 0.5 under all hydraulic conditions. The opening of the regulating sluice lowered the upstream water level, thereby weakening the backwater effect induced by the agricultural sluice. An unstable hydraulic jump formed downstream. Both the height and longitudinal extent of the jump diminished, as the regulating sluice opening increased. The flow regime remained stable and controllable in the tested range. A positive linear relationship was observed between the relative opening e1/H and the diversion ratio R under different inflow rates Q0, which remained valid when varying the side slope coefficient m and sluice width b1. The weir height P reduced the flow capacity of the lateral channel, leading to a decrease in the diversion ratio R. The discharge coefficient of the agricultural diversion sluice and the relative opening e1/H exhibited a power-function relationship under different channel parameters, with R2 u0026gt; 0.97 and a mean relative error below 5%. Nonlinear regression was applied to fit discharge prediction formulas for both free- and submerged-flow conditions, with R2 u0026gt; 0.94. The proportion of predictions within u00B15% of measured values exceeded 87%, indicating high prediction accuracy. Mean relative errors were consistently below 5%, fully meeting the technical standards for flow measurement facilities in irrigation canals. Field test was conducted to verify the gate discharge capacity in the terminal canals of the irrigation districts. Prediction errors remained within 5%. The diversion sluice has strong applicability, low cost, and ease of promotion, which reduces operational difficulties in practical irrigation. The arrangement of agricultural sluice along the channel wall provides a reference for developing the intelligent integrated measurement and control sluice equipment. The findings can also provide a strong reference to design channel sluice shapes and equipment applications in irrigation areas.
Autonomous navigation is increasingly required in smart agriculture. However, the unstructured orchard ground has resulted in the low accuracy of path tracking for crawler-type picking robots. This study aims to propose an improved tracking navigation using fuzzy-immune PID control. (1) Dual-antenna real-time kinematic (RTK) device of Beidou satellite was used to calculate the heading angle and the current position of the chassis; (2) An improved pure tracking algorithm was applied to evaluate the current heading deviation of the chassis, which was used as the control quantity for path tracking; (3) The immune feedback mechanism and fuzzy control were combined to adaptively adjust the proportional parameters of the PID, since the classical PID control failed to eliminate steady-state error and slow response, according to the classical PID controller. (4) Fuzzy control was used to correct the integral and differential parameters of the PID. The stability and response speed of the navigation system were improved after optimization. Linear simulation showed that the online distance and time of the proposed algorithm were 70 cm and 2.4 s, respectively, at an initial angle of 30u00B0, an initial lateral deviation of 0, and a forward-looking distance of 50 cm, with an overshoot of 9.8 cm; in immune PID control, the online distance and time were 303 cm and 10.3 s, respectively, with an overshoot of 11.48 cm; in improved PD control, the online distance and time were 252 cm and 8.5 s, respectively, with an overshoot of 11.21 cm; in sliding mode control, the online distance and time were 127 cm and 4.3 s, respectively, with an overshoot of 9.75 cm. Furthermore, the online distance and time of the proposed algorithm were 81 cm and 3.2 s, respectively, at an initial angle of 0u00B0, an initial lateral deviation of 50 cm, and a forward-looking distance of 50 cm; in immune PID control, the online distance and time were 488 cm and 17.4 s, respectively; in improved PD control, the online distance and time were 235 cm and 8 s, respectively; in sliding mode control, the online distance and time were 119 cm and 4.3 s, respectively. In addition, the online distance and time of the proposed algorithm were 107 cm and 5.1 s, respectively, at an initial angle of 0u00B0, an initial lateral deviation of 100 cm, and a forward-looking distance of 80 cm; in immune PID control the online distance and time were 563 cm and 22.2 s, respectively; improved PD control was not online after traveling 10 m; in sliding mode control, the online distance and time were 159 cm and 6.4 s, respectively. Curve simulation showed that the mean lateral deviation of the improved experiments was 2.12, 3.28 and 4.45 cm, respectively, at three speeds, which were 50.2%, 41.8% and 38.5% lower than those of the classic pure pursuit algorithm; the standard deviations were 2, 2.88 and 3.71 cm, respectively, which were 56.3%, 51.4% and 49.7% lower than those of the classic pure pursuit algorithm; the root mean square errors were 2.91, 4.37 and 5.79 cm, respectively, which were 31.7%, 46.6% and 43.9% lower than those of the classic pure pursuit algorithm. Field experiments showed that the mean lateral deviations of the three experiments were 2.95, 3.04 and 3.44 cm, respectively, at the speed of 0.3 m/s, while the root mean square errors were 3.59, 3.71 and 4.34 cm, respectively, and the standard deviations were 2.04, 2.13 and 2.64 cm, respectively; the mean lateral deviations of the three experiments were 3.80, 4.75 and 3.53 cm, respectively, at the speed of 0.4 m/s, while the root mean square errors were 4.56, 5.80 and 6.35 cm, respectively, and the standard deviations were 2.52, 3.33 and 4.15 cm, respectively; the mean lateral deviations of the three experiments were 4.68, 4.97, and 5.67 cm, respectively, at the speed of 0.5 m/s, while the root mean square errors were 5.98, 6.16 and 6.98 cm, respectively, and the standard deviations were 3.73, 3.65 and 4.07 cm, respectively.