Application of Isoconversional and Multivariate Non-Linear Regression Methods for Evaluation of the Degradation Mechanism and Kinetic Parameters of an Epoxy Resin

The thermo-oxidative degradation of an epoxy resin obtained by curing of an industrially produced DGEBA mixture with 4,4′-methylene-dianiline (MDA) and used as electric insulator has been investigated by TG+DTG+DSC simultaneous analyses performed in static air atmosphere, at five heating rates. TG, DTG and DSC curves showed that, in the temperature range 25–900°C, a glass transition followed by three thermo-oxidative processes occur. The processing of the non-isothermal data corresponding to the first process of thermo-oxidation was performed by using Netzsch Thermokinetics – A Software Module for Kinetic Analysis. The dependence of the activation energy, evaluated by isoconversional methods, on the conversion degree and the relative high standard deviations of this quantity show that the investigated process is a complex one. The mechanism and the corresponding kinetic parameters were determined by multivariate non-linear regression program and checked for quasi-isothermal data. It was pointed out that the first process of thermo-oxidation of the investigated resin consists in four steps, each step having a specific kinetic triplet. The obtained results were used for prediction of the thermal lifetime of the material corresponding to some temperatures of use and the end point criterion 5% and 10% mass loss.