Evaluation of the Durability of Concrete with the Use of Calcined Clays and Limestone in Salinas, Ecuador

This study aims at the evaluation of different formulations of concrete made with calcined clays and limestone (LC3 cement) exposed to aggressive environments. The study includes the evaluation of fresh and hardened properties and a comprehensive evaluation of durability over 24 months. The inclusion of calcined clays in cement increases the specific surface area of the cements, and thus the water demand. However, the high reactivity of calcined clays compared to any other pozzolan, and the synergy that occurs with limestones, enables the use of cements with very low clinker content that achieve strengths similar to those of Portland. Comparisons of LC3 formulations with Portland cement and with concrete containing silica fume prove the superiority of calcined clays in terms of strength and durability. The best results are obtained with LC3-50 cement with 50% clinker produced through co-grinding. Results of concrete made with a blend of 70% Portland cement with 30% LC2 (60% calcined clay, 35% limestone, 5% gypsum, separate ground) are also promising. All concretes made with LC3 show good durability in terms of the results of effective porosity, chloride permeability, and resistivity tests.