In this paper, the original and shear-modified GTN ductile fracture criteria are utilized to investigate the fracture behavior of the AA6061-T6 aluminum alloy sheet during the stretch bending process. An appropriate calibration strategy is presented to find the unknown coefficients of the fracture models. In this way, different tension tests such as uniaxial tension, plane strain, notched tension, and shear tension specimens are utilized. Results show that the shear-modified GTN model calibrated by the mentioned tension tests is able to predict the onset of fracture of the stretch bending process with a 5% error, while the original GTN model, calibrated by the uniaxial tension is unable to predict the fracture properly. Since the accuracy of fracture prediction depends on the stress state, the effects of the calibration test on onset of fracture were investigated. It is shown that using the original GTN model with a proper calibration test (plane strain tension) can achieve a good accuracy with 3.5% error in the stretch bending process. In addition, results show that any change in the friction coefficient and bending radius in the stretch bending process can lead to different fracture behavior. Several investigations are carried out to examine the evolution of damage and displacement of fractures in the stretch bending process under different forming conditions.
原文链接
分享
引用
