Physical and Electrochemical Analysis of an Indoor-Outdoor Ageing Test of Large-Area Dye Solar Cell Devices.

A long-term life test (3200 h) on large-area dye-sensitized cells is performed both under outdoor conditions, in the sunny Mediterranean climate in Rome (Italy), and under continuous light soaking (1 Sun, 85 °C). Different degradation rates are investigated for the outdoor samples with horizontally and vertically oriented cells (azimuth South, tilt angle 25°). Thirty identical photocells (active area=3.6 cm(2), conversion efficiencies=(4.8±0.2)%) are aged using a robust master-plate configuration. After the first 1000 h of testing in open-circuit conditions, some of the test samples are set near the maximum power point (MPP) and the life test continued further until 3200 h. A detailed analysis of the physical parameters obtained by electrochemical impedance is given together with electrolyte transmittance variation with time as a function of the ageing conditions. Faster degradation in devices working at the MPP is observed, due mainly to a progressive decrease of the triiodide concentration in the electrolyte and a likely alteration at the titania/electrolyte interface. Outdoor devices working with vertically oriented cells show clearly that the orientation of long-striped cells can affect the lifetime. The aged cells suffer an increase of recombination rate, change in the chemical capacitance, and positive shift of the titania conduction band level. A strong correlation between the increase of the electrolyte diffusion resistance and degradation phenomena is found.