The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on Ar-40 and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called "brems flipping," as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.

This is a second part of a survey for stable isotopes in the mass range 90 < A < 210, to find candidates showing the bound dineutron nuclear reaction output channel after irradiation with neutrons or photons. To this end, the neutron capture reaction cross sections were calculated in the (0 - 30) MeV energy range with the TALYS-2.0 code for nuclei in the outgoing channel, which are expected to host bound dineutrons. This study was performed to find appropriate candidates to observe bound dineutron decay meeting the criteria based on the (n, gamma) resonance cross section analysis. This study opens up a new direction in dineutron research with the (n,(2)n + n) and (gamma, (2)n) nuclear reactions.

The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting.

The SHiP-charm project was proposed to measure the associated charm production induced by 400 GeV/c protons in a thick target, including the contribution from cascade production. An optimisation run was performed in July 2018 at CERN SPS using a hybrid setup. The high resolution of nuclear emulsions acting as vertex detector was complemented by electronic detectors for kinematic measurements and muon identification. Here we present first results on the analysis of nuclear emulsions exposed in the 2018 run, which prove the capability of reconstructing proton interaction vertices in a harsh environment, where the signal is largely dominated by secondary particles produced in hadronic and electromagnetic showers within the lead target.

The cross-sections and isomeric ratios of the cross-sections for the reaction 176Lu(n,γ)177m,gLu were obtained for the first time on a base of experimental and evaluated data with the MCNP simulation of scattered neutron spectra. The cross-sections of the reactions 175Lu(n,p)175Yb, 175Lu(n,α)172Tm, and 176Lu(n,α)173Tm were precised at a neutron energy of 14.6±0.3 MeV and used for checking up our cross section determination procedure. The account of scattered neutrons to the nuclear reaction was estimated with the MCNP 4c code and TALYS-1.96, EMPIRE 3.2.3 codes calculations. Even with a proper consideration of scattered neutrom spectra, the 176Lu(n,γ)177m,gLu reaction cross section appeared rather greater than the calculations with the TALYS, EMPIRE codes and evaluations within the ENDF/B-VIII.0, TENLD-2021, JEFF-3 data bases and libraries.

DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.

The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos.

Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.

This paper deals with the study of long-lived nuclear molecules, consisting of heavy nuclei - products of the (p, He-2) nuclear reactions on Tb-159 and Ta-181 - and He-2 in a bound state. The lighter nucleus He-2 is localised within the potential well of a heavy one, but both of them keep their identity and constitute an equivalent nucleus of the atom, which does not recognise the complex structure of such a nuclear molecule. We identified this unique configuration based on processing results of instrumental gamma-ray spectra of Tb and Ta foil samples irradiated with protons of energies below the thresholds of the corresponding (p, 2p) nuclear reaction. Then we experimentally determined the half-lives of He-2 decaying by positron emission and electron capture for the Fermi and Gamow-Teller transitions and calculated the phase space factors as well as the binding energy and the radius of He-2 to be equal 402 keV and 10.2 fm, respectively.

The azimuthal correlation angle, Δϕ , between the scattered lepton and the leading jet in deep inelastic e^±p scattering at HERA has been studied using data collected with the ZEUS detector at a centre-of-mass energy of √(s) = 318 GeV , corresponding to an integrated luminosity of 326 pb^-1 . A measurement of jet cross sections in the laboratory frame was made in a fiducial region corresponding to photon virtuality 10 GeV^2< Q^2 < 350 GeV^2 , inelasticity 0.04< y < 0.7 , outgoing lepton energy E_e > 10 GeV , lepton polar angle 140^∘< θ _e < 180^∘ , jet transverse momentum 2.5 GeV< p_T,jet < 30 GeV , and jet pseudorapidity -1.5< η _jet < 1.8 . Jets were reconstructed using the k_T algorithm with the radius parameter R = 1 . The leading jet in an event is defined as the jet that carries the highest p_T,jet . Differential cross sections, dσ /dΔϕ , were measured as a function of the azimuthal correlation angle in various ranges of leading-jet transverse momentum, photon virtuality and jet multiplicity. Perturbative calculations at 𝒪(α _s^2) accuracy successfully describe the data within the fiducial region, although a lower level of agreement is observed near Δϕ→π for events with high jet multiplicity, due to limitations of the perturbative approach in describing soft phenomena in QCD. The data are equally well described by Monte Carlo predictions that supplement leading-order matrix elements with parton showering.

The dineutron as a bound chargeless nucleus of two identical nucleons has been attracting attention for many decades. In addition to the study of the formation of a bound dineutron in the outgoing channel of specific nuclear reactions, cross-section estimates have been gaining interest as research targets. We used a traditional neutron activation technique to irradiate Lu samples followed by measurements of the induced activity with HPGe spectrometer in order to detect gamma-peaks of the 175Lu (n, 2n)174 gLu reaction product when this reaction channel is not open for incident neutron energies. Based on two measurements of the instrumental gamma-ray spectra of Lu samples we reliably identified the presence of the 174 gLu isotope in the outgoing channel of the 175Lu (n, 2n)174 gLu nuclear reaction. Also, the cross-section for this nuclear reaction was obtained and to be equal 33.5−6.7+7.0 mb. For the first time, the dineutron as a nuclearreaction product was indirectly detected via statistically significant observation of the induced activity of 174 gLu with a corresponding cross-section estimate.

Current research has been performed for the stable isotopes within the 90 < A < 210 mass range in order to select properly those of them to be irradiated with neutrons for observation of a bound dineutron in the output channel. To this end, the neutron capture reaction cross sections were calculated in the (0 - 30) MeV energy range with the TALYS-1.96 code. That was performed in accordance with the purpose of this study to meet the criteria based on the (n, γ) resonance cross section analysis to find the appropriate candidates to be used for the possible future experimental confirmation of the formation of the dineutron in the (n,n2) nuclear reaction channel.

This paper considers secondary neutrons contribution to the yield of 99m Tc obtained from the thick Mo-sample via (p,2n) nuclear reaction channel. The physical yield was determined experimentally using 11-MeV cyclotron Eclipse RD with application of the new target assembly developed for solid sample irradiations and appeared to be 30.9 ± 1.3 MBq/μAh. The neutron flux over the sample was analyzed by MCNP simulations taking into account the construction elements of the target module and cyclotron self-shielding. The contribution to the 99m Tc yield by indirect production via 98 Mo(n,γ) 99 Mo → 99m Tc reactions was estimated.

The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 10^3 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.

Measurements of electrons from $\nu_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.

We present a measurement of the $B^{0} \rightarrow D^{*-} \ell^{+} \nu_{\ell}$ ($\ell=e,\mu$) branching ratio and of the CKM parameter $|V_{cb}|$ using signal decays accompanied by a fully reconstructed $B$ meson. The Belle II data set of electron-positron collisions at the $\Upsilon(4S)$ resonance, corresponding to 189.3$\,$fb$^{-1}$ of integrated luminosity, is analyzed. With the Caprini-Lellouch-Neubert form factor parameterization, the parameters $\eta_{\rm EW} F(1) |V_{cb}|$ and $\rho^{2}$ are extracted, where $\eta_{\rm EW}$ is an electroweak correction, $F(1)$ is a normalization factor and $\rho^{2}$ is a form factor shape parameter. We reconstruct 516 signal decays and thereby obtain $\mathcal{B} (B^{0} \rightarrow D^{*-} \ell^{+} \nu_{\ell} ) = \left(5.27 \pm 0.22~\rm{\left(stat\right)} \pm 0.38~\rm{\left(syst\right)}\right) \%$, $\eta_{EW} F(1) |V_{cb}| \times 10^{3} = 34.6 \pm 1.8~\rm{\left(stat\right)} \pm 1.7~\rm{\left(syst\right)}$, and $\rho^{2} = 0.94 \pm 0.18~\rm{\left(stat\right)} \pm 0.11~\rm{\left(syst\right)}$.

A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $\nu_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $\sigma(E_\nu)$ for charged-current $\nu_e$ absorption on argon. In the context of a simulated extraction of supernova $\nu_e$ spectral parameters from a toy analysis, we investigate the impact of $\sigma(E_\nu)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $\sigma(E_\nu)$ must be substantially reduced before the $\nu_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $\sigma(E_\nu)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $\sigma(E_\nu)$. A direct measurement of low-energy $\nu_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level.