Molten salts serve as effective high-temperature heat transfer fluids and thermal storage media used in a wide range of energy generation and storage facilities, including concentrated solar power plants, molten salt reactors and high-temperature batteries. However, at the salt-metal interfaces, a complex interplay of charge-transfer reactions involving various metal ions, generated either as fission products or through corrosion of structural materials, takes place. Simultaneously, there is a mass transport of ions or atoms within the molten salt and the parent alloys. The precise physical and chemical mechanisms leading to the diverse morphological changes in these materials remain unclear. To address this knowledge gap, this work employed a combination of synchrotron X-ray nanotomography and electron microscopy to study the morphological and chemical evolution of Ni-20Cr in molten KCl-MgCl2, while considering the influence of metal ions (Ni2+, Ce3+, and Eu3+) and variations in salt composition. Our research suggests that the interplay between interfacial diffusivity and reactivity determines the morphological evolution. The summary of the associated mass transport and reaction processes presented in this work is a step forward toward achieving a fundamental comprehension of the interactions between molten salts and alloys. Overall, the findings offer valuable insights for predicting the diverse chemical and structural alterations experienced by alloys in molten salt environments, thus aiding in the development of protective strategies for future applications involving molten salts.

Correction for ‘Elucidating a dissolution–deposition reaction mechanism by multimodal synchrotron X-ray characterization in aqueous Zn/MnO2 batteries’ by Varun R. Kankanallu et al., Energy Environ. Sci., 2023, https://doi.org/10.1039/D2EE03731A.

Thin-film solid-state metal dealloying (thin-film SSMD) is an emerging technique that uses self-organization to design nanostructured thin films. The resulting 3D bicontinuous nanostructures are promising for a wide range of applications, such as catalysis and energy storage. In this work, we prepared thin films by SSMD using Ti-Cu as the parent alloy and Mg as the solvent. Using a multimodal approach, we combined synchrotron X-ray spectroscopy, diffraction, and high-resolution electron-based spectroscopy and imaging to study their morphological, structural, and chemical evolution. The processing-structure relationship was analyzed as a function of parent alloy composition and dealloying temperature and time. Morphological transitions from globular, to lamellar, to bicontinuous structures, in conjunction with a ligament size evolution, were identified as functions of the parent alloy composition. The dealloying rate increased with increasing concentration of interdiffusing elements (dissolving component) in the parent alloy. The parting limit, a dealloying compositional threshold, was systematically analyzed and determined to be 30%–40%. The order of crystalline phase formation is CuMg2, Cu2Mg, and Ti; the Ti phase first shows self-reorganization during dealloying, separate from the crystallization process. The coarsening in thin-film SSMD was identified and not entirely self-similar; in addition to the increase of ligament size over time, the formation of larger globular ligaments were also observed. This work furthers our fundamental understanding of thin-film SSMD and nanostructured thin-film design, where the thermodynamic and kinetic effects differ from the bulk counterparts. The fact that dealloying and diffusion outpaces the crystallization and new phase formation also offers opportunities to utilize thin-film SSMD in certain alloy systems in which deleterious intermetallic phases need to be suppressed, that may not be possible in the bulk geometry.

Abstract Solid‐state metal dealloying (SSMD) is a promising method for fabricating nanoscale metallic composites and nanoporous metals across a range of materials. Thin‐film SSMD is particularly attractive due to its ability to create fine features via solid‐state interfacial reactions within a thin‐film geometry, which can be integrated into devices for various applications. This work examines a new dealloying couple, namely the Nb–Al alloy with the dealloying agent Sc, as previously predicted in the machine‐learning (ML) models. Prior ML predictions aimed to guide the design of nanoarchitectured materials through dealloying, relying on intuition‐driven discovery within a large parameter space. However, this work reveals that at the nanoscale, the involvement of oxygen in thin film processing may instead drive the dealloying process, resulting in the formation of bicontinuous nanostructures similar to those formed by metal‐agent dealloying. The phase evolution, as well as chemical and morphological changes, are closely analyzed using a combination of X‐ray absorption spectroscopy, diffraction, and scanning transmission electron microscopy to understand the mechanisms behind nanostructure formation. The findings suggest a potential pathway for utilizing oxygen to drive the formation of bicontinuous metal–metal oxide nanocomposites, paving the way for further development of functional nanoporous materials in diverse fields.

The use of molten salts for large-scale solar concentrated power plants and molten salt reactors has been driving the research to better understand how metals and alloys interact with the molten salt. As the metals may undergo morphological, chemical, and structural change in molten salt environments, it is critical to understand the fundamental mechanisms in these changes. In this work, we will present how we utilized synchrotron X-ray nano-tomography to better understand the 3D morphological evolution of Ni, Cr, and their alloys in molten salt. The effects of temperature and additives in the salt on the morphological evolution will be discussed. At the higher temperature, a characteristic bicontinuous structure can form from molten salt dealloying a binary alloy. [1] This contrasts to the intergranular corrosion found in the same system reacted at a lower temperature. [2] Different additives in the salt were also found to alter the morphological changes of the alloys and can create planar corrosion, percolation dealloying, or redeposition. To complement the morphological studies by X-ray nano-tomography, a suite of X-ray and electron microscopy analyses were also carried out to better understand the chemical and structural (both short-and long-range ordering) evolution. Taking it as a multimodal approach, we will discuss how we couple the analysis from synchrotron operando X-ray absorption spectroscopy, diffraction, and imaging, as well as the multiscale imaging studies from both X-ray and electron microscopy. This work was supported as part of the Molten Salts in Extreme Environments (MSEE) Energy Frontier Research Center (EFRC), funded by the U.S. Department of Energy, Office of Science. References: [1] "Formation of three-dimensional bicontinuous structures via molten salt dealloying studied in real-time by in situ synchrotron X-ray nano-tomography" Xiaoyang Liu, Arthur Ronne*, Lin-Chieh Yu, Yang Liu, Mingyuan Ge, Cheng-Hung Lin, Bobby Layne, Phillip Halstenberg, Dmitry S. Maltsev, Alexander S. Ivanov, Stephen Antonelli, Sheng Dai, Wah-Keat Lee, Shannon M. Mahurin, Anatoly I. Frenkel, James F. Wishart, Xianghui Xiao & Yu-chen Karen Chen-Wiegart* Nature Communications (2021), DOI: 10.1038/s41467-021-23598-8 [2] "Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ synchrotron X-ray nano-tomography" Kaustubh Bawane, Xiaoyang Liu, Ruchi Gakhar, Michael Woods, Mingyuan Ge, Xianghui Xiao, Wah-Keat Lee, Philip Halstenberg, Sheng Dai, Shannon Mahurin, Simon M. Pimblott, James F. Wishart, Yu-chen Karen Chen-Wiegart*, Lingfeng He* Corrosion Science (2021), DOI: 10.1016/j.corsci.2021.109962

Porous materials with high specific surface area, high porosity, and high electrical conductivity are promising materials for functional applications, including catalysis, sensing, and energy storage. Molten salt dealloying was recently demonstrated in microwires as an alternative method to fabricate porous structures. The method takes advantage of the selective dissolution process introduced by impurities often observed in molten salt corrosion. This work further investigates molten salt dealloying in bulk Ni–20Cr alloy in both KCl–MgCl 2 and KCl–NaCl salts at 700 ℃, using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction (XRD), as well as synchrotron X-ray nano-tomography. Micro-sized pores with irregular shapes and sizes ranging from sub-micron to several microns and ligaments formed during the process, while the molten salt dealloying was found to progress several microns into the bulk materials within 1–16 h, a relatively short reaction time, enhancing the practicality of using the method for synthesis. The ligament size increased from ~ 0.7 μm to ~ 1.3 μm in KCl–MgCl 2 from 1 to 16 h due to coarsening, while remaining ~ 0.4 μm in KCl–NaCl during 16 h of exposure. The XRD analysis shows that the corrosion occurred primarily near the surface of the bulk sample, and Cr 2 O 3 was identified as a corrosion product when the reaction was conducted in an air environment (controlled amount sealed in capillaries); thus surface oxides are likely to slow the morphological coarsening rate by hindering the surface diffusion in the dealloyed structure. 3D-connected pores and grain boundary corrosion were visualized by synchrotron X-ray nano-tomography. This study provides insights into the morphological and chemical evolution of molten salt dealloying in bulk materials, with a connection to molten salt corrosion concerns in the design of next-generation nuclear and solar energy power plants.

Oral factor XIa (FXIa) inhibitors may provide a promising new antithrombotic therapy with an improved benefit to bleeding risk profile over existing antithrombotic agents. Herein, we report application of a previously disclosed cyclic carbamate P1 linker which provided improved oral bioavailability in the imidazole-based 13-membered macrocycle to the 12-membered macrocycle. This resulted in identification of compound 4 with desired FXIa inhibitory potency and good oral bioavailability but high in vivo clearance. Further structure-activity relationship (SAR) studies of heterocyclic core modifications to replace the imidazole core as well as various linkers to the P1 group led to the discovery of compound 6f, a potent FXIa inhibitor with selectivity against most of the relevant serine proteases. Compound 6f also demonstrated excellent pharmacokinetics (PK) profile (high oral bioavailability and low clearance) in multiple preclinical species. Compound 6f achieved robust antithrombotic efficacy in a rabbit efficacy model at doses which preserved hemostasis.

Myeloperoxidase (MPO) is a heme peroxidase found in neutrophils, monocytes and macrophages that efficiently catalyzes the oxidation of endogenous chloride into hypochlorous acid for antimicrobial activity. Chronic MPO activation can lead to indiscriminate protein modification causing tissue damage, and has been associated with chronic inflammatory diseases, atherosclerosis, and acute cardiovascular events. Triazolopyrimidine 5 is a reversible MPO inhibitor; however it suffers from poor stability in acid, and is an irreversible inhibitor of the DNA repair protein methyl guanine methyl transferase (MGMT). Structure-based drug design was employed to discover benzyl triazolopyridines with improved MPO potency, as well as acid stability, no reactivity with MGMT, and selectivity against thyroid peroxidase (TPO). Structure-activity relationships, a crystal structure of the MPO-inhibitor complex, and acute in vivo pharmacodynamic data are described herein.

Factor XIa (FXIa) inhibitors are promising novel anticoagulants, which show excellent efficacy in preclinical thrombosis models with minimal effects on hemostasis. The discovery of potent and selective FXIa inhibitors which are also orally bioavailable has been a challenge. Here, we describe optimization of the imidazole-based macrocyclic series and our initial progress toward meeting this challenge. A two-pronged strategy, which focused on replacement of the imidazole scaffold and the design of new P1 groups, led to the discovery of potent, orally bioavailable pyridine-based macrocyclic FXIa inhibitors. Moreover, pyridine-based macrocycle 19, possessing the phenylimidazole carboxamide P1, exhibited excellent selectivity against relevant blood coagulation enzymes and displayed antithrombotic efficacy in a rabbit thrombosis model.

This manuscript describes the discovery of a series of macrocyclic inhibitors of FXIa with oral bioavailability. Assisted by structure based drug design and ligand bound X-ray crystal structures, the group linking the P1 moiety to the macrocyclic core was modified with the goal of reducing H-bond donors to improve pharmacokinetic performance versus 9. This effort resulted in the discovery of several cyclic P1 linkers, exemplified by 10, that are constrained mimics of the bioactive conformation displayed by the acrylamide linker of 9. These cyclic P1 linkers demonstrated enhanced bioavailability and improved potency.

Spiropiperidine indoline-substituted diaryl ureas had been identified as antagonists of the P2Y1 receptor. Enhancements in potency were realized through the introduction of a 7-hydroxyl substitution on the spiropiperidinylindoline chemotype. SAR studies were conducted to improve PK and potency, resulting in the identification of compound 3e, a potent, orally bioavailable P2Y1 antagonist with a suitable PK profile in preclinical species. Compound 3e demonstrated a robust antithrombotic effect in vivo and improved bleeding risk profile compared to the P2Y12 antagonist clopidogrel in rat efficacy/bleeding models.

Current antithrombotic discovery efforts target compounds that are highly efficacious in thrombus reduction with less bleeding liability than the standard of care. Preclinical data suggest that P2Y 1 antagonists may have lower bleeding liabilities than P2Y 12 antagonists while providing similar antithrombotic efficacy. This article describes our continuous SAR efforts in a series of 7‐hydroxyindolinyl diaryl ureas. When dosed orally, 4‐trifluoromethyl‐7‐hydroxy‐3,3‐dimethylindolinyl analogue 4 was highly efficacious in a model of arterial thrombosis in rats with limited bleeding. The chemically labile CF 3 group in 4 was then transformed to various groups via a novel one‐step synthesis, yielding a series of potent P2Y 1 antagonists. Among them, the 4‐benzothiazole‐substituted indolines had desirable PK properties in rats, specifically, low clearance and small volume of distribution. In addition, compound 40 had high i.v. exposure and modest bioavailability, giving it the best overall profile.

Preclinical data suggests that P2Y1 antagonists, such as diarylurea compound 1, may provide antithrombotic efficacy similar to P2Y12 antagonists and may have the potential of providing reduced bleeding liabilities. This manuscript describes a series of diarylureas bearing solublizing amine side chains as potent P2Y1 antagonists. Among them, compounds 2l and 3h had improved aqueous solubility and maintained antiplatelet activity compared with compound 1. Compound 2l was moderately efficacious in both rat and rabbit thrombosis models and had a moderate prolongation of bleeding time in rats similar to that of compound 1.