Spin qubits based on semiconductor quantum dots can offer high coherence times and gate fidelities, and are a potential platform for quantum computation. However, scaling up the number of qubits to the level required for fault-tolerant quantum computing is challenging and will require single-shot, low-footprint qubit readout. Here we report single-shot readout of a spin qubit unit cell using in situ dispersive readout. Our compact, foundry-fabricated unit cell is composed of two electron spins with a controllable exchange interaction, and with it we demonstrate initialization, single-shot readout and a two-electron entangling gate. From exchange oscillations, we extract a spin visibility of 80.7(8)% in the coherent control of a qubit, despite a relatively small lever arm to the resonator gate (less than 0.15(5) eV V-1). We show that the unit cell can be operated at up to 1 K with low charge noise levels, extracted using free induction decay.

Guided elastic waves are a truly cross-disciplinary key enabling technology. For more than five decades, surface acoustic wave (SAW) and bulk acoustic wave devices find widespread applications. Nowadays, different types of guided elastic waves cover the wide spectrum of applications spanning from quantum technologies to the life sciences, from controlling single excitations to macroscopic collective states in condensed matter. Six years after the first 2019 SAW roadmap, we believe it is time to make a step back and take a fresh look at the status of the field and its future challenges. Since the first roadmap in 2019, the spectrum clearly expanded and this new edition presents a current snapshot of the status of this vibrant field and prospects for potential future developments.

Electronic flying qubits offer an interesting alternative to photonic qubits: electrons propagate slower, hence easier to control in real time, and Coulomb interaction enables direct entanglement between different qubits. Although their coherence time is limited, flying electrons in the form of picosecond plasmonic pulses could be competitive in terms of the number of achievable coherent operations. The key challenge in achieving this critical milestone is the development of a new technology capable of injecting 'on-demand' single-electron wavepackets into quantum devices, with temporal durations comparable to or shorter than the device dimensions. Here, we take a significant step towards achieving this regime in a quantum nanoelectronic system by injecting ultrashort single-electron plasmonic pulses into a 14-micrometer-long Mach-Zehnder interferometer. Our results establish that quantum coherence is robust under the on-demand injection of ultrashort plasmonic pulses, as evidenced by the observation of coherent oscillations in the single-electron regime. Building on this, our results demonstrate the existence of a "non-adiabatic" regime that is prominent at high frequencies. This result highlights the potential of flying qubits as a promising alternative to localised qubit architectures, offering advantages such as a reduced hardware footprint, enhanced connectivity, and scalability for quantum information processing.

Semiconductor quantum dot arrays are a promising platform to perform spin-based error-corrected quantum computation with large numbers of qubits. However, due to the diverging number of possible charge configurations combined with the limited sensitivity of large-footprint charge sensors, achieving single-spin occupancy in each dot in a growing quantum dot array is exceedingly complex. Therefore, to scale-up a spin-based architecture we must change how individual charges are readout and controlled. Here, we demonstrate single-spin occupancy of each dot in a foundry-fabricated array by combining two methods. 1/ Loading a finite number of electrons into the quantum dot array; simplifying electrostatic tuning by isolating the array from the reservoirs. 2/ Deploying multiplex gate-based reflectometry to dispersively probe charge tunneling and spin states without charge sensors or reservoirs. Our isolated arrays probed by embedded multiplex readout can be readily electrostatically tuned. They are thus a viable, scalable approach for spin-based quantum architectures.

Coherent manipulation of plasmon wavepackets in solid-state systems is crucial for advancing nanoscale electronic devices, offering a unique platform for quantum information processing based on propagating quantum bits. Controlling the eigenstate of plasmon wavepackets is essential, as it determines their propagation speed and hence the number of quantum operations that can be performed during their flight time through a quantum system. When plasmon wavepackets are generated by short voltage pulses and transmitted through nanoscale devices, they distribute among multiple electron conduction channels via Coulomb interactions, a phenomenon known as charge fractionalisation. This spreading complicates plasmon manipulation in quantum circuits and makes precise control of the eigenstates of plasmon wavepackets challenging. Using a cavity, we demonstrate the ability to isolate and select electron conduction channels contributing to plasmon excitation, thus enabling precise control of plasmon eigenstates. Specifically, we observe an electron-channel blockade effect, where charge fractionalisation into cavity-confined channels is suppressed due to the plasmon's narrow energy distribution, enabling more stable and predictable plasmonic circuits. This technique provides a versatile tool for designing plasmonic circuits, offering the ability to tailor plasmon speed through local parameters, minimise unwanted plasmon excitation in adjacent circuits, and enable the precise selection of electron-channel plasmon eigenstates in quantum interferometers.

Spin qubits based on semiconductor quantum dots are a promising prospect for quantum computation because of their high coherence times and gate fidelities. However, scaling up those structures to the numbers required by fault-tolerant quantum computing is currently hampered by a number of issues. One of the main issues is the need for single-shot low-footprint qubit readout. Here, we demonstrate the single-shot in situ measurement of a compact qubit unit-cell. The unit cell is composed of two electron spins with a controllable exchange interaction. We report initialization, single-shot readout and two-electron entangling gate. The unit cell was successfully operated at up to 1 K, with state-of-the-art charge noise levels extracted using free induction decay. With its integrated readout and high stability, this foundry fabricated qubit unit cell demonstrates strong potential for scalable quantum computing architectures.

Emergence of universal collective behaviour from interactions within a sufficiently large group of elementary constituents is a fundamental scientific paradigm. In physics, correlations in fluctuating microscopic observables can provide key information about collective states of matter such as deconfined quark-gluon plasma in heavy-ion collisions or expanding quantum degenerate gases. Mesoscopic colliders, through shot-noise measurements, have provided smoking-gun evidence on the nature of exotic electronic excitations such as fractional charges, levitons and anyon statistics. Yet, bridging the gap between two-particle collisions and the emergence of collectivity as the number of interacting particles increases remains a challenging task at the microscopic level. Here we demonstrate all-body correlations in the partitioning of electron droplets containing up to N = 5 electrons, driven by a moving potential well through a Y-junction in a semiconductor device. Analyzing the partitioning data using high-order multivariate cumulants and finite-size scaling towards the thermodynamic limit reveals distinctive fingerprints of a strongly-correlated Coulomb liquid. These fingerprints agree well with a universal limit where the partitioning of a droplet is predicted by a single collective variable. Our electron-droplet collider provides critical insight into the interplay of confinement and interaction effects in small electron systems and highlights a new way to study engineered states of matter.

This study presents the development of an on-chip terahertz characterization process for low-volume or thin-film materials. A time-domain method based on the transmission of picosecond electrical pulses through the material to be characterized is proposed to determine the complex refractive index of materials up to hundreds of gigahertz. We demonstrate the capability of this method by determining the complex refractive index of a 15 nL droplet of glycerol over the 50-550 GHz frequency range.

Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in SiMOS transistor-like devices eases future industrial scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radiofrequency reflectometry only requires the already existing transistor gates to readout a quantum dot state, relieving the need for additional elements. In this effort towards scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in SiMOS multi-gate devices, with SNR enhanced thanks to a Josephson traveling-wave parametric amplifier (JTWPA). The broad, tunable 2GHz amplification bandwidth combined with more than 10dB ON/OFF SNR improvement of the JTWPA enables frequency and time division multiplexed readout of interdot transitions, and noise performance near the quantum limit. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performances up to a magnetic field of 1.2T at the quantum dot device, compatible with standard SiMOS spin qubit experiments.

Standard approaches to quantum computing require significant overhead to correct for errors. The hardware size for conventional quantum processors in solids often increases linearly with the number of physical qubits, such as for transmon qubits in superconducting circuits or electron spin qubits in quantum dot arrays. While photonic circuits based on flying qubits do not suffer from decoherence or lack of potential scalability, they have encountered significant challenges to overcome photon loss in long delay circuits. Here, we propose an alternative approach that utilizes flying electronic wave packets propagating in solid-state quantum semiconductor circuits. Using a novel time-bin architecture for the electronic wave packets, hardware requirements are drastically reduced because qubits can be created on-demand and manipulated with a common hardware element, unlike the localized approach of wiring each qubit individually. The electronic Coulomb interaction enables reliable coupling and readout of qubits. Improving upon previous devices, we realize electronic interference at the level of a single quantized mode that can be used for manipulation of electronic wavepackets. This important landmark lays the foundation for fault-tolerant quantum computing with a compact and scalable architecture based on electron interferometry in semiconductors.

The displacement of a single electron enables exciting avenues for nanotechnology with vast application potential in quantum metrology, quantum communication and quantum computation. Surface acoustic waves (SAW) have proven itself as a surprisingly useful solution to perform this task over large distance with outstanding precision and reliability. Over the last decade, important milestones have been achieved bringing SAW-driven single-electron transport from first proof-of-principle demonstrations to accurate, highly-controlled implementations, such as coherent spin transport, charge-to-photon conversion, or anti-bunching of charge states. Beyond the well-established piezoelectric gallium-arsenide platform, first realisations of acousto-electronic transport have also been carried out on the surface of liquid helium that promises unique stability and coherence. In this review article, we aim to keep track of this remarkable progress in SAW-driven transport of electron qubits by explaining these recent achievements from basic principles, with an outlook on follow-up experiments and near-term applications.

Surface acoustic waves (SAWs) are a reliable solution to transport single electrons with precision in piezoelectric semiconductor devices. Recently, highly efficient single-electron transport with a strongly compressed single-cycle acoustic pulse has been demonstrated. This approach, however, requires surface gates constituting the quantum dots, their wiring, and multiple gate movements to load and unload the electrons, which is very time-consuming. Here, on the contrary, we employ such a single-cycle acoustic pulse in a much simpler way - without any quantum dot at the entrance or exit of a transport channel - to perform single-electron transport between distant electron reservoirs. We observe the transport of a solitary electron in a single-cycle acoustic pulse via the appearance of the quantized acousto-electric current. The simplicity of our approach allows for on-demand electron emission with arbitrary delays on a ns time scale. We anticipate that enhanced synthesis of the SAWs will facilitate electron-quantum-optics experiments with multiple electron flying qubits.

Photo-conductive switches (PCS) have been used for the generation and detection of THz sources for decades now. In recent years, PC switches have been used for applications where high efficiency is required, such as in low-temperature cryogenic environments and high magnetic fields. We investigate novel photoconductive switch designs and their nanofabrication. The new photoconductive switch design is made of several hundreds of nano-pillars and has a three-dimensional, vertical design, which allows for optimisation of optical absorption. The new design achieves optical absorption efficiency exceeding 98 % and is numerically predicted to have efficiencies as high as 50 times better than conventional designs. In this study, we will present the operation principle of the novel PCS as well as preliminary nanofabrication and measurement data.

Surface acoustic waves (SAWs) hold a vast potential in various fields such as spintronics, quantum acoustics, and electron-quantum optics, but an electromagnetic wave emanating from SAW generation circuits has often been a major hurdle. Here, we investigate a differential excitation method of interdigital transducers to generate SAWs while reducing the electromagnetic wave. The results show that electromagnetic waves are suppressed by more than 90 % in all directions. This suppression overcomes the operating limits and improves the scalability of SAW systems. Our results promise to facilitate the development of SAW-based applications in a wide range of research fields.

For semiconductor spin qubits, complementary-metal-oxide-semiconductor (CMOS) technology is a promising candidate for reliable and scalable fabrication. Making the direct leap from academic fabrication to qubits fully fabricated by industrial CMOS standards is difficult without intermediate solutions. With a flexible back-end-of-line (BEOL), functionalities such as micromagnets or superconducting circuits can be added in a post-CMOS process to study the physics of these devices or achieve proofs-of-concept. Once the process is established, it can be incorporated in the foundry-compatible process flow. Here, we study a single electron spin qubit in a CMOS device with a micromagnet integrated in the flexible BEOL. We exploit the synthetic spin orbit coupling (SOC) to control the qubit via electric fields and we investigate the spin-valley physics in the presence of SOC where we show an enhancement of the Rabi frequency at the spin-valley hotspot. Finally, we probe the high frequency noise in the system using dynamical decoupling pulse sequences and demonstrate that charge noise dominates the qubit decoherence in this range.

Single-electron sources are an essential component of modern quantum nanoelectronic devices. Owing to their high accuracy and stability, they have been successfully employed for metrology applications, studying fundamental matter interactions and more recently for electron quantum optics. They are traditionally driven by state-of-the-art arbitrary waveform generators that are capable of producing single-electron pulses in the sub-100 ps timescale. In this work, we use an alternative approach for generating ultrashort electron wavepackets. By combining several harmonics provided by a frequency comb, we synthesise Lorentzian voltage pulses and then use them to generate electron wavepackets. Through this technique, we report on the generation and detection of an electron wavepacket with temporal duration of 27 ps generated on top of the Fermi sea of a 2-dimensional electron gas - the shortest reported to date. Electron pulses this short enable studies on elusive, ultrafast fundamental quantum dynamics in nanoelectronic systems and pave the way to implement flying electron qubits by means of Levitons.

Charge noise is one of the main sources of environmental decoherence for spin qubits in silicon, presenting a major obstacle in the path towards highly scalable and reproducible qubit fabrication. Here we demonstrate in-depth characterization of the charge noise environment experienced by a quantum dot in a CMOS-fabricated silicon nanowire. We probe the charge noise for different quantum dot configurations, finding that it is possible to tune the charge noise over two orders of magnitude, ranging from 1 ueV^2 to 100 ueV^2. In particular, we show that the top interface and the reservoirs are the main sources of charge noise and their effect can be mitigated by controlling the quantum dot extension. Additionally, we demonstrate a novel method for the measurement of the charge noise experienced by a quantum dot in the few electron regime. We measure a comparatively higher charge noise value of 40 ueV^2 at the first electron, and demonstrate that the charge noise is highly dependent on the electron occupancy of the quantum dot.

Electron flying qubits are envisioned as potential information links within a quantum computer, but also promise-like photonic approaches-to serve as self-standing quantum processing units. In contrast to their photonic counterparts, electron-quantum-optics implementations are subject to Coulomb interactions, which provide a direct route to entangle the orbital or spin degree of freedom. However, controlled interaction of flying electrons at the single-particle level has not yet been established experimentally. Here we report antibunching of a pair of single electrons that is synchronously shuttled through a circuit of coupled quantum rails by means of a surface acoustic wave. The in-flight partitioning process exhibits a reciprocal gating effect which allows us to ascribe the observed repulsion predominantly to Coulomb interaction. Our single-shot experiment marks an important milestone on the route to realize a controlled-phase gate for in-flight quantum manipulations.