The formation of nucleic acid triple helices ("triplexes") is an area of great interest due to their potential role in the natural and artificial regulation of gene expression or for use in analytical, diagnostic, or synthetic methods. During the coronavirus pandemic, a large search for novel methods for the detection of SARS-CoV-2 was undertaken. Based on triplex affinity capture and using polypurine reverse-Hoogsteen hairpins, a method known as Triplex Enhanced Nucleic Acid Detection Assay (TENADA) was developed for the rapid detection of SARS-CoV-2 without the need for polymerase chain reaction (PCR) amplification. In this work, to expand the targeting scope of this method, we explored triplex-forming bis-pyrimidine clamps targeting a polypurine sequence in the ORF1a region of SARS-CoV-2. To enhance parallel triplex stability, 2'-sugar and 5-methylpyrimidine modifications were incorporated into both strands of the clamps, and their effect on the triplexes formed was assessed via NMR and other biophysical methods. The results revealed distinct stabilizing effects of the modifications, influenced by their size, sugar puckering, and capacity to form short contacts with neighboring residues. The dual ability of clamps to simultaneously form Watson-Crick and Hoogsteen hydrogen bonds offers a novel perspective on the effect of modifications on triplex stability, previously unexplored with triplex-forming oligonucleotides (TFOs). Finally, the bis-pyrimidine clamps that formed the most stable parallel triplexes were applied in a thermal lateral flow (TLF) sensing device, demonstrating their potential as biosensing probes. These clamps effectively detected the synthetic DNA target with limits of detection (LoDs) ranging from 0.05 to 0.001 nM. Understanding the best modification strategies and their impact on the triplex structure will advance the development of clamps as biosensing and therapeutic agents.

In this work, strategies for the detection of pyrimidine-rich DNA target sequences based on the formation of duplex and antiparallel triplex structures are studied. The presence of the target is detected from the changes in fluorescence of silver nanoclusters stabilized by the corresponding complementary DNA probes. In all cases, the formation of intermolecular structures has been assessed by means of melting experiments and multivariate analysis. In the case studied, it has been observed that the formation of antiparallel triplex structures produces changes in fluorescence properties that could be more useful for analytical purposes than those observed when only duplex structures are formed. In particular, the use of silver nanoclusters confined within a loop rich in cytosinetype bases in the antiparallel triplex structure resulting from the interaction of probe and analyte has been shown to produce an increase in red fluorescence. This latter probe has been shown to be selective against target sequences that have mismatches that could affect the formation of stable duplex structures, while it has been shown to tolerate a small number of purine mismatches that could affect the stability of the resulting antiparallel triplex structure. As a final remark, it should be noted that this methodology could also be used in the development of analytical procedures that allow the detection of antiparallel triplex structures, which are difficult to observe with other spectroscopic methods.

Benzo[c]phenanthridine alkaloids are known for their stabilizing effects on non-canonical DNA structures, particularly G-quadruplexes (G4s). In this study, the interaction of fagaronine, a rare benzo[c]phenanthridine alkaloid, with several DNA structures (including B-DNA, parallel, antiparallel and hybrid G4s) is studied using molecular fluorescence and circular dichroism (CD) spectroscopy. It has been found that fagaronine significantly enhances the stability of all tested G4 conformations. Furthermore, a study by NMR spectroscopy provided valuable information on the mechanism of interaction of the ligand with the parallel G4 structure adopted by Pu22T14T23, a sequence mutated with respect to that found within the promoter region of the c-myc gene. Remarkably, when compared with data reported in the literature, fagaronine appears to exhibit one of the strongest G4 thermal stabilization effects ever recorded for a small ligand.

There is growing interest in hybrid DNA structures, particularly G-quadruplex-duplex junctions, as potential ligand binding sites. In this work, we investigate the interaction of two cyanine dyes (R9 and 3b), which differ in hydrophilicity, with various DNA structures, including duplex DNA, parallel and antiparallel G-quadruplexes, and a G-quadruplex-duplex junction. We employed molecular spectroscopic techniques (UV-visible absorption, circular dichroism, fluorescence), nuclear magnetic resonance (NMR) spectroscopy, multivariate analysis, and molecular docking studies. UV-visible absorption and circular dichroism provided insights into dye aggregation and the overall interaction modes, while NMR and docking yielded structural details. The results reveal that the two dyes exhibit distinct interactions with the studied DNA structures due to their differing behaviors in aqueous solution. The less polar 3b dye is aggregation-prone and prefers π-stacking with the terminal tetrads in the parallel G-quadruplex structure, leading to strong induced circular dichroism in the visible region and fluorescence responses toward parallel G-quadruplex. The more polar R9 dye forms defined non-stacking complexes, especially at structured duplex or G-quadruplex-duplex junction sites, showing selective fluorescence enhancement. NMR and molecular docking support the idea that R9 binds selectively and without aggregation, while 3b binds strongly and non-specifically, often resulting in precipitation.

Chemical modifications of nucleic acids are widely used to tune stability and functionality in therapeutic and nanotechnological applications. Among these, fluorinated cytidine derivatives such as 2'-fluoro-arabinocytidine (2'F-araC) and 2'-fluoro-ribocytidine (2'F-riboC) have been shown to influence i-motif structures differently, with 2'F-araC strongly stabilizing and 2'F-riboC exerting a mildly deleterious effect. In this study, we investigate the impact of gemcitabine (2'-deoxy-2',2'-difluorocytidine, dFdC) on i-motif stability. dFdC exhibits small effects in single or double substituted sequences, but a pronounced stabilization when multiple consecutive residues are incorporated. Thermal and pH-dependent analyses demonstrate that sequences containing fully substituted dFdC maintain i-motif folding at neutral pH and show enhanced thermal stability. Structural insights suggest that this stabilization arises from a combination of factors, such as hyperconjugative interactions, hydrogen bonding, and dipole alignment, while the adaptable sugar conformation mitigates destabilizing minor groove contacts observed in other more rigid modifications, such as 2'-F-riboC. Cooperative interactions among adjacent dFdC residues and potential changes in hydration may play a key factor in reinforcing stability. These results highlight the unique capacity of dFdC to enhance i-motif robustness and suggest that strategically placed difluoro substitutions can be exploited to design i-motifs with improved stability, expanding their potential in biotechnology and therapeutic applications.

A new series of styryl hemicyanine dyes featuring substituted N-phenylpiperazine end groups was synthesized using an environmentally friendly procedure. The photophysical properties of the dyes were systematically investigated in organic solvents of varying polarity and when bound to DNA, using a combination of spectroscopic techniques. The dyes show strong negative solvatochromism and exhibit fluorescence quenching upon DNA binding. The dyes are definitely halochromic, exhibiting pronounced fluorescent acidochromism, accompanied by a photoinduced electron transfer (PET) effect. Titration with acid of the dye–DNA complexes restores fluorescence, indicating suppression of the PET and, at the same time, rigidizing of the chemical structure. UV/VIS and fluorescence titration, circular dichroism spectroscopy, and molecular docking methods were used to investigate the interaction mode between the dyes and DNA. Density functional theory (DFT) and time-dependent density functional theory (TDDFT) quantum chemical calculations were employed in deciphering the observed spectroscopic behavior and PET-related effects. The obtained results suggest the dyes’ potential as pH-responsive fluorescent probes for nucleic acid environments.

Two new asymmetric monomethine cyanine dyes, featuring dimethoxy quinolinium or methyl quinolinium end groups and benzothiazole or methyl benzothiazole end groups were synthesized. The chemical structures of the two dyes—(E)-6,7-dimethoxy-1-methyl-4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)quinolin-1-ium iodide (3a) and (E)-4-((3,5-dimethylbenzo[d]thiazol-2(3H)-ylidene)methyl)-1,2-dimethylquinolin-1-ium iodide (3b)—were confirmed through NMR spectroscopy and MALDI-TOF mass spectrometry. A new methodology was developed to study monocationic dyes in the absence of a matrix and cationizing compounds in MALDI-TOF mass experiments. The newly synthesized dyes contain hydrophobic functional groups attached to the chromophore, enhancing their affinity for the hydrophobic regions of nucleic acids within the biological matrix. The dyes’ photophysical properties were investigated in aqueous solutions and DMSO, as well as in the presence of nucleic acids. The dyes exhibit notable aggregachromism in both pure aqueous and buffered solutions. The observed aggregation phenomena were further elucidated using computational methods. Fluorescence titration experiments revealed that upon contact with nucleic acids, the dyes exhibit bioaggregachromism–aggregachromism on the surfaces of the respective biomolecular matrix (RNA or DNA). This bioaggregachromism was further confirmed by CD spectroscopy. Given the pronounced aggregachromism detected, we conclude that the dyes investigated in this study are highly suitable for use as fluorogenic probes in biomolecular recognition techniques. The unique absorption and fluorescence spectra of these dyes make them promising fluorogenic markers for various bioanalytical methods related to biomolecular recognition.

Triplex DNA structures, which are formed by the addition of an extra strand to a target B-DNA duplex, have attracted increasing interest due to their analytical and therapeutic applications. These structures are classified into parallel and antiparallel, depending on the orientation of the Triplex-Forming Oligonucleotide (TFO) relative to the B-DNA duplex. Whereas the formation of parallel triplexes is easily detected by monitoring spectral changes in the UV region, the formation of antiparallel triplexes produces small or even no spectral variations, which makes their detection difficult and uncertain. In this study, we propose the use of capillary electrophoresis with ultraviolet absorption spectrophotometric (CE-UV) detection combined with the multivariate curve resolution-alternating least squares (MCR-ALS) chemometric method to analyse mixtures of DNA sequences capable of forming mixtures of B-DNA duplex and triplex antiparallel structures. Rapid and reproducible CE-UV analysis in hydroxypropylcellulose (HPC)-coated capillaries are done in a pH 7.4 buffer containing Mg(II) for the stabilization of the intermolecular species. Spectra measured from 220 to 300 nm along the CE-UV analysis of individual DNA strands and of their mixtures at different ratios are merged into an augmented data matrix. This is later analyzed with MCR-ALS to deconvolute characteristic pure spectra and electropherograms for each one of the CE-UV analysis considered. This procedure has allowed the resolution and detection of DNA species present in mixtures of DNA strands capable of forming duplexes, as well as antiparallel triplex structures.

Polypyrimidine sequences can be targeted by antiparallel clamps forming triplex structures either for biosensing or therapeutic purposes. Despite its successful implementation, their biophysical properties remain to be elusive. In this work, PAGE, circular dichroism and multivariate analysis were used to evaluate the properties of PPRHs directed to SARS-CoV-2 genome. Several PPRHs designed to target various polypyrimidine sites within the viral genome were synthesized. These PPRHs displayed varying binding affinities, influenced by factors such as the length of the PPRH and its GC content. The number and position of pyrimidine interruptions relative to the 4 T loop of the PPRH was found a critical factor, affecting the binding affinity with the corresponding target. Moreover, these factors also showed to affect in the intramolecular and intermolecular equilibria of PPRHs alone and when hybridized to their corresponding targets, highlighting the polymorphic nature of these systems. Finally, the functionality of the PPRHs was evaluated in a thermal lateral flow sensing device showing a good correspondence between their biophysical properties and detection limits. These comprehensive studies contribute to the understanding of the critical factors involved in the design of PPRHs for effective targeting of biologically relevant genomes through the formation of triplex structures under neutral conditions.

The development of fluorescence-based methods for bioassays and medical diagnostics requires the design and synthesis of specific markers to target biological microobjects. However, biomolecular recognition in real cellular systems is not always as selective as desired. A new concept for creating fluorescent biomolecular probes, utilizing a fluorogenic dye and biodegradable, biocompatible nanomaterials, is demonstrated. The synthesis of a new dicationic asymmetric monomethine cyanine dye with benzo[d]thiazolium-N-propionamide and chloroquinoline end groups is presented. The photophysical properties of the newly synthesized dye were examined through the combined application of spectroscopic and theoretical methods. The applicability of the dye as a fluorogenic nucleic acid probe was proven by UV-VIS spectroscopy and fluorescence titration. The dye–nucleic acid interaction mode was investigated by UV-Vis and CD spectroscopy. The newly synthesized dicationic dye, like other similar fluorogenic structures, limited permeability, which restricts its use as a probe for RNA and DNA. To enhance cellular delivery, we utilized a patented technology that employs solid, insoluble lipid nanoparticles. This method ensures the complete introduction of the dye into cells while minimizing activity outside the cells. In our study involving two human cell lines, we observed improved penetration through the cell membrane and distinctive selectivity in visualizing nucleic acids within the cytoplasm and nucleus.

Quadruplex-Duplex (Q-D) junctions are unique structural motifs garnering increasing interest as drug targets, due to their frequent occurrence in genomic sequences. The viral HIV LTR-III sequence was chosen as a Q-D junction model to study the affinity of the selected compounds BMH-21, namitecan (ST-1968), and doxorubicin (DOXO), all containing a planar polycyclic aromatic moiety, linked to either one short aminoalkyl or an aminoglycosyl group. A multidisciplinary approach that combines NMR spectroscopy, molecular modelling, circular dichroism (CD) and fluorescence spectroscopy was employed. The studied ligands induced moderate but clear stabilization to the Q-D junction by interacting with the interfacial tetrad. DOXO was found to be the best Q-D junction binder. Interestingly, the removal of the aminoglycosyl group significantly changed the pattern of the interactions, indicating that highly polar substituents have a stronger affinity with the exposed regions of the Q-D junction, particularly at the level of the interfacial tetrad.

EDITORIAL article Front. Chem., 03 January 2024Sec. Chemical Biology Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1355870

The i-motif is a class of nonstandard DNA structure with potential biological implications. A novel capillary electrophoresis with an ultraviolet absorption spectrophotometric detection (CE-UV) method has been developed for the rapid analysis of the i-motif folding equilibrium as a function of pH and temperature. The electrophoretic analyses are performed in reverse polarity of the separation voltage with 32 cm long fused silica capillaries permanently coated with hydroxypropyl cellulose (HPC), after an appropriate conditioning procedure was used to achieve good repeatability. However, the electrophoretic separation between the folded and unfolded conformers of the studied cytosine-rich i-motif sequences (i.e., TT, Py39WT, and nmy01) is compromised, especially for Py39WT and nmy01, which result in completely overlapped peaks. Therefore, deconvolution with multivariate curve resolution-alternating least-squares (MCR-ALS) has been required for the efficient separation of the folded and unfolded species found at different concentration levels at pH 6.5 and between 12 and 40 °C, taking advantage of the small dissimilarities in the electrophoretic mobilities and UV spectra levels. MCR-ALS has also provided quantitative information that has been used to estimate melting temperatures (Tm), which are similar to those determined by UV and circular dichroism (CD) spectroscopies. The obtained results demonstrate that CE-UV assisted by MCR-ALS may become a very useful tool to get novel insight into the folding of i-motifs and other complex DNA structures.

Cytosine-rich DNA sequences may fold into a structure known as i-motif, with potential in vivo modulation of gene expression. The stability of the i-motif is residual at neutral pH values. To increase it, the addition of neighboring moieties, such as Watson-Crick stabilized loops, tetrads, or non-canonical base pairs have been proposed. Taking a recently described i-motif structure as a model, the relative effect of these structural moieties, as well as several DNA ligands, on the stabilization of the i-motif has been studied. To this end, not only the original sequence but different mutants were considered. Spectroscopic techniques, PAGE, and multivariate data analysis methods have been used to model the folding/unfolding equilibria induced by changes of pH, temperature, and the presence of ligands. The results have shown that the duplex is the moiety that is responsible of the stabilization of the i-motif structure at neutral pH. The T:T base pair, on the contrary, shows little stabilization of the i-motif. From several selected DNA-binding ligands, the G-quadruplex ligand BA41 is shown to interact with the duplex moiety, whereas non-specific interaction and little stabilization has been observed within the i-motif.

In the light of recent retrovirus pandemics, the issue of discovering new and diverse RNA-specific fluorochromes for research and diagnostics became of acute importance. The great majority of nucleic acid-specific probes either do not stain RNA or cannot distinguish between DNA and RNA. The versatility of polymethine dyes makes them suitable as stains for visualization, analysis, and detection of nucleic acids, proteins, and other biomolecules. We synthesized the asymmetric dicationic homodimeric monomethine cyanine dyes 1,1'-(1,3-phenylenebis(methylene))bis(4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)pyridin-1-ium) bromide (Т1) and 1,1'-(1,3-phenylenebis(methylene))bis(4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)quinolin-1-ium) bromide (M1) and tested their binding specificity, spectral characteristics, membrane penetration in living and fixed cells, cellular toxicity, and stability of fluorescent emission. Mesenchymal cells have diverse phenotypes and extensive proliferation and differentiation properties. We found dyes T1 and M1 to show high photochemical stability in living mesenchymal stem cells from apical papilla (SCAP) with a strong fluorescent signal when bound to nucleic acids. We found M1 to perform better than control fluorochrome (Hoechst 33342) for in vivo DNA visualization. T1, on the other hand, stains granular cellular structures resembling ribosomes in living cells and after permeabilization of the nuclear membrane stains the nucleoli and not the chromatin in the nucleus. This makes T1 suitable for the visualization of structures rich in RNA in living and fixed cells.

SARS-CoV-2, a positive-strand RNA virus has caused devastating effects. The standard method for COVID diagnosis is based on polymerase chain reaction (PCR). The method needs expensive reagents and equipment and well-trained personnel and takes a few hours to be completed. The search for faster solutions has led to the development of immunological assays based on antibodies that recognize the viral proteins that are faster and do not require any special equipment. Here, we explore an innovative analytical approach based on the sandwich oligonucleotide hybridization which can be adapted to several biosensing devices including thermal lateral flow and electrochemical devices, as well as fluorescent microarrays. Polypurine reverse-Hoogsteen hairpins (PPRHs) oligonucleotides that form high-affinity triplexes with the polypyrimidine target sequences are used for the efficient capture of the viral genome. Then, a second labeled oligonucleotide is used to detect the formation of a trimolecular complex in a similar way to antigen tests. The reached limit of detection is around 0.01 nM (a few femtomoles) without the use of any amplification steps. The triplex enhanced nucleic acid detection assay (TENADA) can be readily adapted for the detection of any pathogen requiring only the knowledge of the pathogen genome sequence.

The development of oligonucleotide conjugates for in vivo targeting is one of the most exciting areas for oligonucleotide therapeutics. A major breakthrough in this field was the development of multifunctional GalNAc-oligonucleotides with high affinity to asialoglycoprotein receptors (ASGPR) that directed therapeutic oligonucleotides to hepatocytes. In the present study, we explore the use of G-rich sequences functionalized with one unit of GalNAc at the 3′-end for the formation of tetrameric GalNAc nanostructures upon formation of a parallel G-quadruplex. These compounds are expected to facilitate the synthetic protocols by providing the multifunctionality needed for the binding to ASGPR. To this end, several G-rich oligonucleotides carrying a TGGGGGGT sequence at the 3′-end functionalized with one molecule of N-acetylgalactosamine (GalNAc) were synthesized together with appropriate control sequences. The formation of a self-assembled parallel G-quadruplex was confirmed through various biophysical techniques such as circular dichroism, nuclear magnetic resonance, polyacrylamide electrophoresis and denaturation curves. Binding experiments to ASGPR show that the size and the relative position of the therapeutic cargo are critical for the binding of these nanostructures. The biological properties of the resulting parallel G-quadruplex were evaluated demonstrating the absence of the toxicity in cell lines. The internalization preferences of GalNAc-quadruplexes to hepatic cells were also demonstrated as well as the enhancement of the luciferase inhibition using the luciferase assay in HepG2 cell lines versus HeLa cells. All together, we demonstrate that tetramerization of G-rich oligonucleotide is a novel and simple route to obtain the beneficial effects of multivalent N-acetylgalactosamine functionalization.

There is an increasing interest in the study of guanine or cytosine-rich sequences that may fold into G-quadruplex (G4) or i-motif (iM) structures showing a short hairpin (or stem-loop) stabilized by Watson-Crick base pairs. These hybrid spatial arrangements may be target of ligands that have been shown to interact strongly with BDNA. In this work, the interaction of the palmatine alkaloid with several sequences forming different G4s, iMs, and hybrid structures has been studied by means of spectroscopic and separation techniques, as well as multivariate data analysis methods. At the experimental conditions used in this work, the results have shown that this ligand strongly stabilizes parallel G4 structures, whereas a weaker interaction was observed with the antiparallel G4 adopted by the thrombin-binding aptamer or iMs. The presence of hairpins within the loops scarcely affects the affinity of this ligand for the hybrid G4/duplex or iM/duplex structures. Fluorescence measurements have provided evidence of a certain interaction with iMs at pH 5.1, despite the absence of thermal stabilization effects.