PURPOSE:The aim of this research was to evaluate the shear bond strength of different laboratory resin composites bonded to a fiber-reinforced composite substrate with some intermediate adhesive resins.MATERIALS AND METHODS:Mounted test specimens of a bidirectional continuous fiber-reinforced substrate (StickNet) were randomly assigned to three equal groups. Three types of commercially available veneering resin composites - BelleGlass®, Sinfony®, and GC Gradia® were bonded to these specimens using four different adhesive resins. Half the specimens per group were stored for 24 hours; the remaining were stored for 30 days. There were 10 specimens in the test group (n). The shear bond strengths were calculated and expressed in MPa. Data were analyzed statistically, and variations in bond strength within each group were additionally evaluated by calculating the Weibull modulus.RESULTS:Shear bond values of those composites are influenced by the different bonding resins and different indirect composites. There was a significant difference in the shear bond strengths using different types of adhesive resins (p = 0.02) and using different veneering composites (p < 0.01). Belle-Glass® had the highest mean shear bond strength when bonded to StickNet substrate using both Prime & Bond NT and OptiBond Solo Plus. Sinfony® composite resin exhibited the lowest shear bond strength values when used with the same adhesive resins. The adhesive mode of failure was higher than cohesive with all laboratory composite resins bonded to the StickNet substructure at both storage times. Water storage had a tendency to lower the bond strengths of all laboratory composites, although the statistical differences were not significant.CONCLUSION:Within the limitations of this study, it was found that bonding of the veneering composite to bidirectional continuous fiber-reinforced substrate is influenced by the brand of the adhesive resin and veneering composite.

INTRODUCTION:The aim of this report is to present a severe case of phenytoin (PHT)-induced gingival hyperplasia in a Saudi patient.MATERIALS AND METHODS:A 12-year-old male epileptic patient, undergoing PHT therapy, was diagnosed clinically with severe gingival hyperplasia. His treatment consisted meticulous oral care and weekly professional prophylaxis. The patient was advised oral folic acid supplementation (0.5 mg/day) and was also recommended 0.2% chlorhexidine gluconate mouthwash twice daily.RESULTS:There was significant reduction in the hyperplastic tissue within 4 weeks of treatment.CONCLUSION:It is possible to treat PHT-induced gingival hyperplasia non-surgically with intensive dental care, correct oral hygiene and oral folic acid supplements.

With the increase in demand for cosmetics and esthetics, resin composite restorations and all-ceramic restorations have become an important treatment alternative. Taking into consideration the large number of prosthodontic and adhesive resins currently available, the strength and durability of these materials needs to be evaluated. This laboratory study presents the shear bond strengths of a range of veneering resin composites bonded to all-ceramic core material using different adhesive resins.

Objectives. This paper aims to review the diagnostic application of cone beam computed tomography (CBCT) in the field of periodontology. Data. Original articles that reported on the use of CBCT for periodontal disease diagnosis were included. Sources. MEDLINE (1990 to January 2014), PubMed (using medical subject headings), and Google Scholar were searched using the following terms in different combinations: “CBCT,” “volumetric CT,” “periodontal disease ,” and “periodontitis.” This was supplemented by hand-searching in peer-reviewed journals and cross-referenced with the articles accessed. Conclusions. Bony defects, caters, and furcation involvements seem to be better depicted on CBCT, whereas bone quality and periodontal ligament space scored better on conventional intraoral radiography. CBCT does not offer a significant advantage over conventional radiography for assessing the periodontal bone levels.

Objectives. This paper aims to review the evidence on the potential roles of modifiable and nonmodifiable risk factors associated with periodontal disease. Data. Original articles that reported on the risk factors for periodontal disease were included. Sources. MEDLINE (1980 to Jan 2014), PubMed (using medical subject headings), and Google Scholar were searched using the following terms in different combinations: “periodontal disease,” “periodontitis,” “risk factors,” and “causal.” This was supplemented by hand-searching in peer-reviewed journals and cross-referenced with the articles accessed. Conclusions. It is important to understand the etiological factors and the pathogenesis of periodontal disease to recognize and appreciate the associated risk factors. As periodontal disease is multifactorial, effective disease management requires a clear understanding of all the associated risk factors.

The level of aesthetic requirement in clinical practice has increased over the past decade, and this has made it necessary for dentist to explore this field in order to satisfy the existing demand in this field. Technology can provide a solution to many of the routine hassles in dental practice. While optimal systems are far from fully realized, technology undeniably has made enormous progress. This review aims to provide an update on some of the recent advances in the field of aesthetic dentistry. MEDLINE (1990 to Jan 2014), PubMed (using medical subject headings), and Google Scholar searched using the following terms “Dental Composites”, “Ceramic Crowns”, “Aesthetic Posts”, “Ceramic Veneers”, and “Computer-Aided Design/Computer Aided Manufacturing (CAD/CAM)”. This was supplemented by hand-searching in peer-reviewed journals and cross-referenced with the articles accessed. Dentist and dental technician alike must be aware of the current technologies in their fields and be able to use it to their and their patient’s advantage. The learning objective of this article is to review the advantages and disadvantages of recent esthetic materials and technology to aid in the proper utilization of the available treatment options with discretion.