Progress And First Results With The New Multifrequency Ecrh System For Asdex Upgrade

A multifrequency electron cyclotron resonance heating (ECRH) system is currently under construction at the ASDEX Upgrade tokamak experiment. The system employs depressed collector gyrotrons, step tunable In the range of 105-140 GHz, with a maximum output power of 1 MW and a pulse length of 10 s. One two-frequency GYCOM gyrotron has been in routine operation at ASDEX Upgrade since 2006. A further extension or the system with three more gyrotrons; is underway. An in situ calibration scheme for the broadband torus window has been developed. The system is equipped with fast steerable mirrors for real-time MHD control. The gyrotron and the mirrors are fully integrated into the discharge control system. The ECRH system turned out to be essential for the operation of H-modes after covering the plasma facing components of ASDEX Upgrade with tungsten. Deposition of ECRH inside rho tor < 0.2 is necessary to prevent accumulation of W in plasmas with high pedestal temperatures. With respect to the limited loop voltage available in ITER, the use of ECRH for neutral-gas preionization to facilitate plasma breakdown and its application during the current ramp-up to increase the conductivity In order to save transformer flux have been demonstrated successfully for 105 GHz, 3.2 T (O1-mode) and 140 GHz, 2.2 T (X2-mode), corresponding to 170 GHz at ITER with the full and half values of its foreseen toroidal field of 5.3 T.