Bright line defects of hot rolled plate for 2205 duplex stainless steel
Applied Mechanics and Materials(2014)
摘要
In hot rolling process of 2205 duplex stainless steel, it was found that bright line defects are mainly located at where is about distance of 200 mm from two sides of hot rolled plate. The forming reason of bright line defects is studied by means of metallographic microscope, scanning electron microscope (SEM) combined with energy dispersive spectrometer (EDS). It is concluded that the formation of bright line defects has associated with sticking and that the temperature reduction on the edge of hot rolling plate causes a high percentage of austenite phase which is network structure. In order to prevent or avoid the happening of the sticking phenomenon, it is necessary to uniformly distribute the oxide on the strip surface by controlled rolling process.
更多查看译文
关键词
Duplex stainless steel,Hot rolled plate,Bright line defects,Sticking,Abnormal microstructure
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要