Ultra high speed wireless communication with low complexity transceiver

Signals, Systems, and Electronics(2012)

引用 11|浏览10
暂无评分
摘要
Parallel Sequence Spread Spectrum (PSSS) is a physical layer (PHY) base band technology. It was selected for the wireless sensor network standard IEEE802.15.4-2006, in order to increase data rate and radio performance in fading channels for frequency bands below 1GHz. In the work presented in this paper PSSS is used for the first time in the 60 GHz ISM Band to achieve ultra-high transmission speed similar to IEEE802.11ad but at lower receiver complexity. A different encoding scheme than for IEEE802.15.4-2006 has been applied to improve the coverage range of the 60 GHz radio. Using an available 60GHz heterodyne radio we achieved a measured data rate of 4Gb/s at a distance of 3 m using a simple Vivaldi antenna. The signal processing was performed off-line using a Matlab implementation in a “Hardware in the Loop” approach. Furthermore we will outline the architecture of a mixed-signal (analog/digital) baseband processor that reduces the implementation complexity by at least one order of magnitude. This will result both in lower power dissipation as well as lower Silicon area consumption.
更多
查看译文
关键词
zigbee,fading channels,millimetre wave antennas,radio transceivers,signal processing,spread spectrum communication,wireless sensor networks,ieee802.11ad,ieee802.15.4-2006 standard,ism band,matlab implementation,psss,vivaldi antenna,bit rate 4 gbit/s,frequency 60 ghz,hardware in the loop approach,heterodyne radio,low complexity transceiver,mixed signal baseband processor,parallel sequence spread spectrum,radio performance,receiver complexity,ultra high speed wireless communication,wireless sensor network,ofdm,bandwidth,decoding,transistors,baseband
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要