Ultrathin, flexible, and transparent polymer multilayer composites for the protection of silver surfaces.

Silver coatings at the nanoscale became of high interest for the integration of electronic functionalities on all kinds of objects for daily use. In these thin coatings, corrosion is a big problem as it destroys these thin layers and leads to a loss of conductivity due to missing bulk material. For protection of thin silver coatings against H(2)S induced corrosion, we developed nanocoatings based on the covalent layer-by-layer technique. We prepared composites by subsequent deposition of polyamines like polyethylenimine (PEI) or polyallylamine (PAAm) and polyanhydrides like poly(maleic anhydride-alt-methyl vinyl ether) (Gantrez) or poly(styrene-co-maleic anhydride) (PSMA). For the tuning of the hydrophobicity, the layers were terminated by reaction with palmitoylic acid derivatives. Reflectivity measurements, contact angle measurements, and AFM measurements were made to investigate how the coatings affect the surface properties. All coatings show a lower reflectivity below 450 nm compared to pure silver, depending on the number of layers deposited. The addition of a palmitoylic derivative to the surface increases the hydrophobicity, but only in case of the Gantrez-PVAm-composite, this approach leads to real hydrophobicity, reaching contact angles above 90°. AFM measurements show a decrease of the roughness of the polymer coated surfaces compared to the pure metal surfaces. Corrosion tests in a H(2)S atmosphere show a good protective effect of the palmitoyl-terminated composites. Martindale abrasion tests on coated textiles reveal a good stability of the prepared polymer composites.