HgCdTe Molecular Beam Epitaxy Growth Temperature Calibration Using Spectroscopic Ellipsometry

In this work, spectroscopic ellipsometry (SE) is demonstrated as a technique to calibrate growth temperature measurement devices (thermocouples and pyrometers) prior to real mercury cadmium telluride (HgCdTe) growth. A pyrometer is used to control the substrate temperature in molecular beam epitaxy (MBE) for the growth of HgCdTe-based material. It is known that a very narrow optimal growth temperature range exists for HgCdTe, typically ±5°C. A nonoptimal growth temperature will negatively impact on material quality by inducing growth defects, reducing composition uniformity, causing difficulty in controlling doping incorporation, promoting poor electronic properties, and having other adverse effects. Herein, we present a method for measuring and calibrating substrate temperature measurement equipment by using spectroscopic ellipsometry (SE) prior to real HgCdTe growth. This method is easy to implement, nondestructive, and reliable. The proposed method requires one substrate with a surface material with optical properties well known in the temperature range of interest, but not necessarily the same base material as the material to be grown. In the specific case of this work, we use epitaxial CdTe material on top of a Si substrate. This wafer was used to create a database of its optical properties as a function of temperature by using SE. From the collected optical parameters, a model is built and a fit is generated from the SE data collected. The temperature can then be determined by fitting the temperature-dependent SE measurements from this specific CdTe material. The angle offset and surface roughness parameters are also included in the model to account for changes in the average run-to-run angle variations and surface conditions over time. This work does not attempt to obtain an absolute temperature, but rather a reliable and repeatable relative temperature measurement.