Implementation Of Open-Architecture Kinematic Controller For Articulated Robots Under Ros

Purpose - This paper aims to present an open-architecture kinematic controller, which was developed for articulated robots, facing the demands of various applications and low cost on robot system.Design/methodology/approach - A general approach to develop this controller is described in hardware and software design. The hardware consists of embedded boards and programable multi-axes controller (PMAC), connected with ethernet, and the software is implemented on a robot operating system with Movelt!. The authors also developed a teach pendant running as a LAN node to provide a human-machine interface (HMI).Findings -The proposed approach was applied to several real articulated robot systems and was proved to be effective and portable. The proposed controller was compared with several similar systems to verify its integrality and flexibility. The openness of this controller was discussed and is summarized at the end of this paper.Practical implications - The proposed approach provided an open and low-complex solution for experimental studies in the lab and short-run production in small workshops.Originality/value - Several contributions are made by the research. The actuation model and communication were implemented to integrate the trajectory planning module and PMAC for setting up the physical interface. Method and program interface based on kinematics was provided to generate various interpolations for trajectory planning. A teach pedant with HMI was developed for controlling and programing the robot.