Investigation of impeller modification and eccentricity for non-Newtonian fluid mixing in stirred vessels

A shear thinning fluid (1% carboxymethyl cellulose) was used to investigate mixing under laminar flow conditions in an unbaffled vessel. The effects of impeller modification in addition to eccentricity were studied. Quantitative measurements such as percentage of uncovered area and coefficient of variance (CoV) of a tracer solution distributed inside the vessel were obtained using planar laser-induced fluorescence (PLIF) method. Increased eccentricity was found to be more effective than increasing rpm alone in reducing isolated mixing regions size (determined by the percentage of uncovered area). The dual-flow pitched blade turbine (DF-PBT), which was the modified version of a standard pitched blade turbine (PBT), was designed to provide both upward and downward flow at the same time to induce more chaotic flow. Though numerical analysis showed this type of flow generated, DF-PBT did not return lower values for the percentage of uncovered area and CoV than PBT did. Power consumption data were also compared between the two impeller types and eccentric locations. Further analyses focusing on the interactions between the impeller blades and fluid rheology is needed to improve laminar mixing in stirred vessels by impeller modification.