A 0.7-V 28-nW CMOS Subthreshold Voltage and Current Reference in One Simple Circuit

This paper presents a low-power and high-precision voltage and current reference (VCR) in one simple circuit. The voltage reference is derived from the threshold voltage difference between an I/O (i.e., 3.3-V NMOS) and standard (i.e., 1.8-V NMOS) transistors with temperature-independent bias current, and the current reference is the voltage reference divided by a temperature-insensitive resistor. The resistor is made up by series connection of a proportional-to-absolute-temperature (PTAT) NWELL resistor and a complementary-to-absolute-temperature (CTAT) high-resistance poly resistor in series. Implemented in a standard 0.18- $\mu \text{m}$ CMOS process, the proposed VCR circuit takes an active area of only 0.055 mm ² . The measured voltage and current references ( $\text{V}_{\mathrm {ref}}$ and $\text{I}_{\mathrm {ref}}$ ) at room temperature are 368 mV and 9.77 nA, respectively. The measured average temperature coefficient (TC) of $\text{V}_{\mathrm {ref}}$ and $\text{I}_{\mathrm {ref}}$ are 43.1 ppm/°C and 149.8 ppm/°C over a temperature range of −40~125°C with one-time trimming and the variation coefficients are 0.35% and 1.6%, respectively. The measured voltage and current line sensitivities are 0.027%/V and 0.6%/V, respectively. The minimum supply voltage is 0.7 V with a total power consumption of 28 nW. The measured power supply ripple rejection (PSRR) of $\text{V}_{\mathrm {ref}}$ is −65 dB @DC and −39.4 dB at frequencies higher than 1 Hz.