The effect of contact severity on micropitting: Simulation and experiments

A numerical contact fatigue model combining the effects of rolling contact fatigue and wear has been developed based on mixed elastohydrodynamic lubrication (EHL) theory, continuum damage mechanics (CDM) and the Archard's wear law. A series of benchtop tests were conducted using a triple-contact test rig to study the influence of surface roughness, speed and load on micropitting. The proposed surface damage model was used to simulate the rolling-sliding line contact of surfaces having different surface topography. The film thickness, contact pressure and sub-surface stress were determined by solving the generalized Reynolds equation and using the well-developed discrete convolute and fast Fourier transformation (DC-FFT) method. The jump-in-cycle was assumed to evaluate the accumulated damage based on the tested fatigue life and sub-surface stress histories. Surface topography was updated by calculating the wear height with the Archard's wear equation. Results reveal that micropitting occurs under the combined effect of wear and contact fatigue. The micropitting rate increased then turn to decreased as the lambda ratio (λ) increased. The contact pressure significantly affected the contact fatigue life and the micropitting rate.