Determining local thermal transport in a composite uranium-nitride/silicide nuclear fuel using square-pulse transient thermoreflectance technique

Laser-based techniques have become an appealing option for determining the thermal diffusivities (D) and conductivities (k) of nuclear materials that would otherwise prove too hazardous or difficult to measure otherwise. These techniques have enabled non-destructive and non-contact thermal transport measurements with micron level spatial resolution. In this study, a new thermoreflectance technique known as square-pulse transient thermoreflectance (SPTR) is described and used to determine D values of both uranium sesquisilicide (U3Si2) and uranium nitride (UN) phases in a composite fuel. An extensive sensitivity analysis was conducted that identified the optimal measurement parameters of standard materials with a range of thermal transport properties comparable to those of various fuel types. The standards were measured using both SPTR as well as a spatial-domain thermoreflectance technique (SDTR). Several U3Si2 and UN phase regions of polished UN/U3Si2 (70/30 vol%) samples were measured using both methods, and the resulting calculated D and k values are reported, with both techniques showing excellent agreement between samples. Finally, the ability to use the technique for local diffusivity mapping was demonstrated over a multiphase region, and could be used to determine thermal transport properties in precipitates, secondary phases, and irradiation-damaged regions of post-irradiated fuel samples.