An Energy Harvesting Modified Mac Protocol For Power-Line Communication Systems Using Rf Energy Transfer: Design And Analysis

Radio frequency energy transfer (RET) technology has been introduced as a promising energy harvesting (EH) method to supply power in both wireless communication (WLC) and power-line communication (PLC) systems. However, current RET modified MAC (medium access control) protocols have been proposed only for WLC systems. Due to the difference in the MAC standard between WLC and PLC systems, these protocols are not suitable for PLC systems. Therefore, how to utilize RET technology to modify the MAC protocol of PLC systems (i.e., IEEE 1901), which can use the radio frequency signal to provide the transmission power and the PLC medium to finish the data transmission, i.e., realizing the 'cooperative communication' remains a challenge. To resolve this problem, we propose a RET modified MAC protocol for PLC systems (RET-PLC MAC). Firstly, we improve the standard PLC frame sequence by adding consultation and confirmation frames, so that the station can obtain suitable harvested energy, once it occupied the PLC medium, and the PLC system can be operated in an on-demand and self-sustainable manner. On this basis, we present the working principle of RET-PLC MAC. Then, we establish an analytical model to allow mathematical verification of RET-PLC MAC. A 2-dimension discrete Markov chain model is employed to derive the numerical analysis results of RET-PLC MAC. The impacts of buffer size, traffic rate, deferral counter process of 1901, heterogeneous environment and quality of information (QoI) are comprehensively considered in the modeling process. Moreover, we deduce the optimal results of system throughput and expected QoI. Through extensive simulations, we show the performance of RET-PLC MAC under different system parameters, and verify the corresponding analytical model. Our work provides insights into realizing cooperative communication at PLC's MAC layer.