Chrome Extension
WeChat Mini Program
Use on ChatGLM

Mechanistic study on silica nanoparticles-assisted guar gum polymer flooding for enhanced oil recovery in sandstone reservoirs

Colloids and Surfaces A: Physicochemical and Engineering Aspects(2020)

Cited 60|Views1
No score
Abstract
Nanoparticles-assisted polymer flooding has attracted the attention of researchers for its enhanced rheological properties and stability of the chemical slugs. The present work deals with the rheological properties of guar gum with and without silica nanoparticles in the temperature range from 25 degrees C to 75 degrees C. It is found that the viscosity of guar gum solution increases significantly with increasing concentration of silica nanoparticles. Imbibition experiments were performed with waxy crude oil-saturated sandstone cores using 2000 ppm brine, 4000 ppm guar gum solution, 0.2 wt% silica nanoparticles in distilled water, and 4000 ppm guar gum containing 0.2 wt% silica nanoparticles as test fluids for understanding the mechanism of wettability alteration in the presence of silica nanoparticles and guar gum. Mixture of 0.2 wt% silica nanoparticles and 4000 ppm guar gum shows higher oil recovery (similar to 36 % original oil-in-place) compared to other test solutions in imbibition experiments. Contact angles between crude oil and sandstone rock were measured in presence of 2000 ppm brine, 0.025 wt% silica nanoparticles in water, and guar gum (2000 ppm)-silica nanoparticles (0.025 wt%) mixture. Guar gum containing silica nanoparticles are effective in changing the contact angle towards water-wet state (Contact angle similar to 115 degrees) from oil-wet state (contact angle similar to 72 degrees). No significant phase change is observed during the phase behavior experiment except for light emulsion formation. Finally, core flooding experiments were conducted with guar gum, silica nanoparticles solution, and mixture of silica nanoparticles and guar gum for additional oil recovery to verify the effectiveness of the chemical slugs. Results showed that the addition of silica nanoparticles to guar gum solution improves the effectiveness of guar gum polymer by recovering 44.3 % of original oil-in-place. A comparative study was also conducted to show the performance of silica nanoparticles-assisted guar gum solution for additional oil recovery. Most of the research works have focused on the application of silica nanoparticles-induced polyacrylamide and xanthan gum chemical slugs in enhanced oil recovery. However, laboratory study based on the application of silica nanoparticles-induced guar gum solution in additional oil recovery adds some interesting findings to the literature compared to the existing information.
More
Translated text
Key words
Silica nanoparticles,Guar gum,Polymer flooding,Enhanced oil recovery,Imbibition,Phase behaviour
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined