Themorphology of polyethylene (PE) separator for lithium-ion battery tuned by the extracting process

Thermally induced phase separation (TIPS) is used to prepare polyethylene (PE) micro-porous membrane, consisting of melt blending, fast cooling, stretching and extracting process, which determine the pore-structure of the PE membrane. In this study, we tried to extract PE/liquid paraffin (LP) oil membrane to obtain PE porous membrane by nhexane (n-PE) and dichloromethane (d-PE). The n-PE membrane would shrink by 10% for extractant volatilizing, less than 15% of the d-PE membrane after the extraction. These PE membranes were applied into symmetrical cells and LiCoO2/Li cells. As a result, the LiCoO2/Li cell based on n-PE separator exhibited better capacity retention (98%) than d-PE separator (91%) after 80 cycles at a current density of 1C rate for higher ionic conductivity. And the LiCoO2/Li cell with d-PE separator had higher capacity at 2C and 3C, it could be attributed to stronger interaction between solvent and wall of d-PE separator with the smaller and curved pore. In addition, the method that electrochemical impedance spectroscopy (EIS) technique carried out with cyclic voltammetry (CV) and charge-discharge curves is successfully applied to monitor the variety of impedance during the cycles, which is helpful to explore the mechanism of capacity attenuation.