Removal Of Ca2+ And Mg2+ From Oilfield Wastewater Using Reusable Peg/Fe3o4/Go-Nh2 Nanoadsorbents And Its Efficiency For Oil Recovery

The high salinity of oilfield-produced water caused by the presence of metal ions, such as Ca2+ and Mg2+, has a significantly adverse effect on oil recovery. It is crucial to remove these metal ions efficiently before the oilfield wastewater is reinjected down into the oil wells. To address this issue, we prepared a PEG/Fe3O4/GO-NH2 nanoadsorbent by aminating GO, incorporating magnetic Fe3O4 nanoparticles and coating with PEG (PEG = poly (ethylene glycol); GO-NH2 = aminated graphene oxide). We investigated the removal ratios of the nanoadsorbent for Ca2+ and Mg2+. The respective removal ratios for Ca2+ and Mg2+ reached 69.8 % and 61.1 % at 10 min, indicating that the nanoadsorbent was capable of efficiently removing Ca2+ and Mg2+. We also evaluated the reusability of the nanoadsorbent by recycling and reusing it 5 times. At the fifth recycling run, the nanoadsorbent retained relatively high reuse rates (79.1 % for Ca2+, 69.5 % for Mg2+) and removal ratios (69.5 % for Ca2+, 64.3 % for Mg2+), suggesting that the nanoadsorbent possessed relatively high reusability. Oilfield wastewater treated with the nanoadsorbent was employed for oil recovery in core displacement experiments. The oil recovery efficiency significantly increased by 11.8 % compared with untreated oilfield wastewater. Therefore, the PEG/Fe3O4/GO-NH2 nanoadsorbent exhibits considerable potential for the treatment of oilfield wastewater to enhance oil recovery.