Experimental and Numerical Characterization of a Novel Natural Gas Low NOx Burner in Gas Turbine Realistic Environment

A fundamental milestone in the development of a low NOx burner technology is the demonstration of its capabilities in realistic environment. This is especially true for the novel burner subject of this paper, which has been extensively characterized throughout single burner scale experiments. An exhaustive description of the early development phases of the novel burner has been provided by authors in recently published works. The most promising geometry was selected for the assessment in real combustor arrangement, consisting of a full-scale annular combustor test rig. This paper reports the main results of such an assessment. Pollutant emissions and pressure pulsations have been measured at gas turbine relevant operating conditions. Moreover, dedicated blow-out tests have been performed to obtain the extinction equivalence ratio at both ambient and pressurized conditions, as done during the past single burner rig campaign. Basically, an adequate set of data has been gathered, allowing a direct comparison between full-annular and reduced-scale tests. A general alignment of behavior has been observed, as both low NOx capability and blow-out characteristics of full-annular arrangement turned out to be substantially unchanged with respect to the single burner. Nevertheless, some discrepancies in magnitude have been highlighted and discussed. Details have been given involving deeper numerical analysis by means of a dedicated model developed by the authors in previous works. Indeed, improvement to the model has been introduced in the context of this paper to overcome some limitations arisen in predicting emissions. Finally, a preliminary stability analysis has been carried out, with the aim to describe the onset of thermoacoustic instability tendency as observed in the full-annular tests.