Experimental Study Of Earplug Noise Reduction Of A Double Hearing Protector On An Acoustic Test Fixture

Double hearing protectors (DHPs), earplugs and earmuffs worn in combination, may be needed in high level noise environments. The DHP sound attenuation is known to be less than the sum of each single protector attenuation. This effect, referred to as the DHP effect, is still not fully understood. A recent study has shown that it can be observed on an acoustic test fixture (ATF) and characterized by the decrease of the earplug noise reduction (NR) when the earmuff is added. In this paper, a measurement methodology is proposed to (i) identify the main sound paths related to the DHP effect on an ATF and (ii) explain the latter by the relative contributions of the air-borne and structure-borne transmissions in the system. The focus is put on the NR values of the earplug alone and in the DHP. Measurement results suggest that the DHP effect is related to the energy transmitted from the earcup, through the earmuff cushion and finally into the earcanal via the sound radiation of the earplug and/or earcanal lateral walls. This flanking structure-borne path is found to dominate over the "direct" air-borne path through the hearing protectors at frequencies above 300 Hz. (C) 2020 Elsevier Ltd. All rights reserved.