An Investigation On The Degradation Behaviors Of Mg Wires/Pla Composite For Bone Fixation Implants: Influence Of Wire Content And Load Mode

Poly-lactic acid based biocomposite strengthened with magnesium alloy wires (Mg wires/PLA composite) is prepared for bone fixation implantation. The influence of wire content and load mode on the degradation performances of the composite and its components is studied. The result suggests the degradation of Mg wires could slow down the pH decrease originated from the degradation of PLA, while a relatively high wire content contributes to descend the degradation rate of Mg wire in the composite. Dynamic load significantly promotes the mechanical loss of the specimens. After 30 days immersion, the Sb retention is about 65%, 52% and 55%, respectively for pure PLA, the composite at 10 vol% and 20 vol% under dynamic load, comparing to 75%, 70% and 72% under no load. Moreover, dynamic load could further mitigate the degradation of Mg wires by increasing convective transport of acidic products out of the composite.