Radiation Effects On Pure-Silica Multimode Optical Fibers In The Visible And Near-Infrared Domains: Influence Of Oh Groups

Signal transmission over optical fibers in the ultraviolet to near-infrared domains remains very challenging due to their high intrinsic losses. In radiation-rich environments, this is made even more difficult due to the radiation-induced attenuation (RIA) phenomenon. We investigated here how the number of hydroxyl groups (OH) present in multi-mode (MM) pure-silica core (PSC) optical fibers influences the RIA levels and kinetics. For this, we tested three different fiber samples: one "wet", one "dry" and one with an intermediate "medium" OH content. The RIA of the three samples was measured in the 400-900 nm (similar to 3 eV to similar to 1.4 eV) spectral range during and after an X-ray irradiation at a dose rate of 6 Gy(SiO2) s(-1) up to a total accumulated dose of 300 kGy(SiO2). Furthermore, we evaluated the H-2-pre-loading efficiency in the medium OH sample to permanently improve both its intrinsic losses and radiation response in the visible domain. Finally, the spectral decomposition of the various RIA responses allows us to better understand the basic mechanisms related to the point defects causing the excess of optical losses. Particularly, it reveals the relationship between the initial OH groups content and the generation of non-bridging oxygen hole centers (NBOHCs). Moreover, the presence of hydroxyl groups also affects the contribution from other intrinsic defects such as the self-trapped holes (STHs) to the RIA in this spectral domain.