Microwave-Heated High-Silica Glass Cloth Reinforced Polyimide-Based Metamaterial Absorber For Aircraft Deicing

This study discusses development of a microwave-heated thin-panel metamaterial absorber (MA) for application in aircraft deicing. The base of the MA was selected to be high-silica glass cloth reinforced polyimide (GCRP), manufactured through the autoclave process. The material's surfaces were sprayed with metal powder as per the absorber design. In simulation with an optimized parameter set, the MA had a minimum reflectivity of -35 dB at 2.45 GHz. Two rounds of microwave heating experiments were conducted, studying different MA designs. In the first round of experiments, conducted in a stainless-steel mesh chamber, the minimum reflectivity of the first six samples tested, observed at 2.45 GHz, was approximately -5 dB. The accompanying thermal images indicate that the MA is heated periodically, according to the spatial distribution of the electromagnetic field, with an overall heating rate of approximately 0.001 degrees C/s/W. Clearer thermal images were obtained in the second round of experiments, conducted in a microwave anechoic chamber, where a heating rate of 0.01 degrees C/s/W was observed near the new MA's resonant frequency of 2.28 GHz. At this frequency, the MA's reflectivity was -7.63 dB. These results indicate that the developed MA has potential for application in aircraft deicing.