Development and validation of stability-indicating RP-HPLC method for estimation of dalfampridine in bulk drug and tablet dosage form

Background In the current study, a simple, improved, precise, rapid, and accurate reverse phase liquid chromatographic method was produced for the estimation of dalfampridine in bulk and tablet dosage form which is a potassium channel blocker used for the treatment of multiple sclerosis (MS). The separation of dalfampridine was achieved isocratically on a C 18 column (250 × 4.6 mm, 5 μm) using (0.1% v/v) buffer pH 3.0 ± 0.05 adjusted with diluted orthophosphoric acid (OPA) and acetonitrile (ACN) in the ratio of 60:40% (v/v) as a mobile phase, at a flow rate of 0.5 mL/min, and column temperature of 40 °C. HPLC grade methanol as diluents was used. Five microliters of the standard solution of the drug was injected, and the eluted analytes were detected at 262 nm. Results Dalfampridine was eluted at 4.5 min with a run time of 10 min. Linearity in the method was measured in the concentration range of 25–75 ppm with a correlation coefficient of 0.999. Limit of detection and limit of quantitation were found to be 0.711 μg/mL and 2.154 μg/mL, respectively. Dalfampridine was subjected for forced degradation stability study in conditions of thermal, acid, alkali, and oxidation and photo-degradation condition. The degradants were well resolved from the dalfampridine main peak. Validation of the developed method is carried as per USFDA and ICH guidelines. Conclusion The results of the analysis prove that the method is simple, improved, precise, accurate, and rapid for estimating the content of dalfampridine in bulk drug and tablet dosage form and can be applied for routine analysis.