A Method for Measuring the Surface Free Energy of Topical Semi-solid Dosage Forms.

Our aim was to determine the surface free energy (SFE) of semi-solid dosage forms (SSDFs) by establishing a reproducible method for measuring the contact angle of liquids to SSDFs. Four SSDFs were used: petrolatum, an oil/water (O/W) and a water/oil (W/O) cream, and an alcohol-based gel. The SSDFs were evenly spread on a glass slide, and the change in contact angle over time was measured by dropping water, glycerol, diiodomethane and n-hexadecane as the test liquids. Depending on the combination of test liquid and SSDF, the contact angle was either constant or decreased in an exponential manner. Contact angles may have decreased in an exponential manner because the reaction between the test liquid and the SSDF altered the interfacial tension between the two phases and changed the surface tension of the test liquid and the SFE of the SSDF. The contact angle of the test liquid to the SSDF could be determined reproducibly using the initial contact angle immediately after dropping the liquid on the SSDF as the contact angle before reaction. Using the obtained contact angles and the Owens-Wendt-Rabel-Kaelble equation, we calculated the SFE and its component for the SSDFs tested and found that the results reflect the physicochemical properties of SSDFs. Furthermore, the work of adhesion (WA) of the SSDF to Yucatan micropig skin was calculated using the SFE for the SSDFs. Interestingly, the WA values for all SSDFs tested were comparable.