The Effect Of Fsti To The Combined Separation Control Strategy Of Surface Roughness With Upstream Wakes

Boundary layer separation can lead to partial loss of lift and higher aerodynamic losses on low-pressure turbine airfoils at low Reynolds number in high bypass ratio engines. The combined effects of upstream wakes and surface roughness on boundary layer development have been investigated experimentally to improve the performance of ultra-high-lift low-pressure turbine (LPT) blades. The measurement was performed on a linear cascade with an ultra-high-lift aft-loaded LP turbine profile named LET-LPTA with Zweifel loading coefficient of about 1.37. The wakes were simulated by the moving cylindrical bars upstream of the cascade. The time-mean aerodynamic performance and the boundary layer behavior on suction surface had been measured with two 3-hole probes and a hot-wire probe. Three roughness heights ranging from 8.8-20.9 mu m combined with three roughness deposit positions ranging from 5.2%-39.5% suction surface length formed a large measurement matrix. The roughness with height of 8.81 mu m (1.05 x 10(-4) chord length) covering 5.2% suction surface reduced the profile loss across the whole Reynolds number range. Under the effect of roughness associated with upstream wakes, the freestream turbulence intensity (FSTI) is responsible in part for the development of the wake-induced transition region, calmed region and natural transition region of the boundary layer. The transition length and the transition onset of the boundary layer were also affected by the FSTI.